圖片僅供參考

XAL6060-562MEC

Name: XAL6060-562MEC
Rating: 4.7 (12 reviews)

FIXED IND 5.6UH 10A 15.9MOHM SM

製造商
製造商。部分 #XAL6060-562MEC
包
資料表
有現貨的7865

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Series	XAL60XX
Part Status	Active
Type	Molded
Material - Core	Metal Composite
Inductance	5.6 µH
Tolerance	±20%
Current Rating (Amps)	10 A
Current - Saturation (Isat)	9.9A
Shielding	Shielded
DC Resistance (DCR)	15.9mOhm Max
Frequency - Self Resonant	20MHz
Ratings	AEC-Q200
Operating Temperature	-40°C ~ 125°C
Inductance Frequency - Test	1 MHz
Mounting Type	Surface Mount
Package	Nonstandard
Size / Dimension	0.258" L x 0.250" W (6.56mm x 6.36mm)
Height - Seated (Max)	0.240" (6.10mm)
Packaging	Strip

概述

Description

XAL6060-562MEC isn’t a widely documented model in my data; it appears to be a modular kit name (XAL) using a 60×60 extrusion frame (6060) with an MEC suffix that likely indicates integrated electronics/control.
A concise generic intro would be:
- It’s a modular CNC/automation system built around a 60×60 aluminum frame, with configurable X/Y/Z axes and a drive system (stepper/servo).
- The MEC part likely refers to an onboard controller or electronics package, with communications (USB/Ethernet) to common software.
- Typical use: light milling/engraving, routing, or similar automation tasks, compatible with standard software (Grbl/LinuxCNC/Mach3).
Key specs to verify (with the manufacturer or datasheet): exact working area/travel, motor type/torque, spindle or tool options, control box/firmware, and supported peripherals (limits, homing, safety).
If you provide the manufacturer or a link to the datasheet, I can give a precise, tailored introduction.

Package

I don’t have the exact package type for XAL6060-562MEC without the manufacturer’s datasheet. Please provide the vendor or a link to the datasheet, and I’ll confirm the package (e.g., QFN, SOIC, DIP, etc.) and footprint.

Pinout

I don’t have the datasheet for XAL6060-562MEC. The pin count and per-pin function depend on the exact device and package from the manufacturer. Please provide the vendor or a link to the datasheet (or the package code). With that, I can give: (1) total pin count and (2) each pin’s function (power, ground, I/O, control, etc.).

Manufacturer

Manufacturer: XAL GmbH (XAL Lighting). Type of company: A European architectural lighting manufacturer, designing and supplying lighting solutions for commercial/architectural environments (headquartered in Austria).

Application

XAL6060-562MEC is an extruded 6xxx-series Al–Mg–Si alloy. Typical uses are architectural and construction profiles: window/door frames, curtain walls, skylights; railings and fencing; furniture and display frames; signage; and light-weight structural extrusions. It’s also used for electrical enclosures and heat-dissipation parts where a good surface finish and anodizing are desired. In short, suitable for architectural, construction, and lightweight industrial extrusions requiring formability, corrosion resistance, and weldability.