圖片僅供參考
W25Q16JVUXIQ
2.7V~3.6V 16Mbit 133MHz SPI USON-8-EP(2x3) Memory (ICs) RoHS
- 製造商
- 製造商。 部分 #W25Q16JVUXIQ
- 包
- 資料表 W25Q16JVUXIQ DataSheet
- 有現貨的18978
100%原創; 新
24小時準備發貨
365天保修
RFQ&; 獲得更多折扣
規格
| Packaging | USON-8-EP(2x3) |
| Clock Frequency | 133MHz |
| Interface | SPI |
| Memory Size | 16Mbit |
| Operating temperature | -40℃~+85℃ |
| Voltage - Supply | 2.7V~3.6V |
| Data Retention - TDR (Year) | 20 Years |
| Page Programming Time (Tpp) | 3ms |
| Program / Erase Cycles | 100,000 cycles |
| Standby Supply Current | 10uA |
概述
Description
The W25Q16JVUXIQ is a 16-megabit (2 MB) Serial NOR Flash memory chip produced by Winbond Electronics. It features a standard SPI (Serial Peripheral Interface) for easy integration into various electronic devices. This chip is primarily used for data storage in applications such as embedded systems, consumer electronics, and IoT devices.
Key characteristics include:
- Density: 16 Mb (2 MB) of memory.
- Speed: Supports high-speed read operations, with clock frequencies up to 104 MHz.
- Interface: SPI protocol, facilitating simple and efficient communication with microcontrollers and processors.
- Volatile Storage: Non-volatile, retaining data even when power is removed.
- Erase/Write Capabilities: Supports sector and bulk erase, along with multiple write cycles.
The W25Q16JVUXIQ is ideal for applications requiring compact storage solutions with reliable performance and low power consumption.
Key characteristics include:
- Density: 16 Mb (2 MB) of memory.
- Speed: Supports high-speed read operations, with clock frequencies up to 104 MHz.
- Interface: SPI protocol, facilitating simple and efficient communication with microcontrollers and processors.
- Volatile Storage: Non-volatile, retaining data even when power is removed.
- Erase/Write Capabilities: Supports sector and bulk erase, along with multiple write cycles.
The W25Q16JVUXIQ is ideal for applications requiring compact storage solutions with reliable performance and low power consumption.
Features
The W25Q16JVUXIQ is a 16 Mb (2 MB) Serial NOR Flash memory chip manufactured by Winbond. It features a 3V supply voltage and supports SPI (Serial Peripheral Interface) for efficient data transfer. Key characteristics include:
1. Density: 16 Megabits (2 Megabytes).
2. Speed: Supports a high-speed clock frequency up to 104 MHz.
3. Memory Architecture: Offers a uniform 4KB erase sector and 32KB block erase sizes, facilitating flexible data storage management.
4. Endurance: Capable of enduring up to 100,000 program/erase cycles per sector.
5. Data Retention: Provides data retention of up to 20 years.
6. Command Set: Compatible with standard SPI commands, including Quad-SPI for faster access.
7. Packages: Available in various packages, including SOIC, WSON, and DFN options.
This memory is ideal for applications in consumer electronics, automotive, and industrial systems requiring reliable and fast non-volatile storage.
1. Density: 16 Megabits (2 Megabytes).
2. Speed: Supports a high-speed clock frequency up to 104 MHz.
3. Memory Architecture: Offers a uniform 4KB erase sector and 32KB block erase sizes, facilitating flexible data storage management.
4. Endurance: Capable of enduring up to 100,000 program/erase cycles per sector.
5. Data Retention: Provides data retention of up to 20 years.
6. Command Set: Compatible with standard SPI commands, including Quad-SPI for faster access.
7. Packages: Available in various packages, including SOIC, WSON, and DFN options.
This memory is ideal for applications in consumer electronics, automotive, and industrial systems requiring reliable and fast non-volatile storage.
Package
The W25Q16JVUXIQ is typically packaged in a SOIC-8 (Small Outline Integrated Circuit) package.
Pinout
The W25Q16JVUXIQ is a 16 Mbit (2 Mbyte) serial NOR Flash memory chip from Winbond. It features a total of 8 pins. The pin functions are as follows:
1. CS# (Chip Select): Active low signal to select the device.
2. SO (Serial Output): Data output pin for reading.
3. SI (Serial Input): Data input pin for writing commands and data.
4. SCK (Serial Clock): Clock input for synchronization during data transfer.
5. WP# (Write Protect): Active low for write protection.
6. HOLD# (Hold): Active low pin to pause the operation without resetting the device.
7. VCC: Power supply pin (typically 2.7V to 3.6V).
8. GND: Ground pin.
This chip supports various operational modes, including Quad SPI, and is often used in embedded systems for data storage.
1. CS# (Chip Select): Active low signal to select the device.
2. SO (Serial Output): Data output pin for reading.
3. SI (Serial Input): Data input pin for writing commands and data.
4. SCK (Serial Clock): Clock input for synchronization during data transfer.
5. WP# (Write Protect): Active low for write protection.
6. HOLD# (Hold): Active low pin to pause the operation without resetting the device.
7. VCC: Power supply pin (typically 2.7V to 3.6V).
8. GND: Ground pin.
This chip supports various operational modes, including Quad SPI, and is often used in embedded systems for data storage.
Manufacturer
The W25Q16JVUXIQ is manufactured by Winbond Electronics Corporation. Winbond is a Taiwanese semiconductor company that specializes in the design and production of memory chips, including NOR flash memory, DRAM, and other specialty memory products. Founded in 1987, the company serves a wide range of applications in sectors such as consumer electronics, automotive, and industrial markets. Winbond is recognized for its focus on developing high-quality memory solutions that meet the evolving needs of various industries.
Application
The W25Q16JVUXIQ is a 16Mb SPI Flash memory chip commonly used in embedded systems for code storage, firmware updates, and data logging. Its applications span consumer electronics, automotive systems, industrial automation, IoT devices, and portable electronics. The chip's fast read and write speeds make it suitable for applications requiring quick data retrieval and memory expansion.
Equivalent
The W25Q16JVUXIQ is a 16Mb serial NOR flash memory from Winbond. Equivalent products include the Microchip SST26VF016B, Spansion S25FL016K, and Cypress IDT S25FL016D. These chips offer similar specifications like memory size, SPI interface, and voltage range, but verify compatibility for specific applications.
船舶
運輸管道我們
通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。
運費參攷(DHL/FedEx):
動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。
聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。
掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。
支付
Payment Methods
付款條件為100%預付。
現時,我們只接受以下付款方式:
1. 貝寶
2. 信用卡/借記卡
3. 電匯
類似的
-
MX25R8035FM1IL0
Macronix
-
MX25L3233FM1I-08Q
Macronix
-
MX25V2033FM1I
Macronix
-
MX25V16066M1I02
Macronix
-
MX25V16066M2I02
Macronix
-
MX25L25673GMI-10G
Macronix
-
MX25L2006EM1I-12G
Macronix
-
MX25U3232FZBI02
Macronix
-
MX25L6433FM2I-08G
Macronix
-
MX25L12833FM2I-10..
Macronix
-
MX25L12833FZNI-10..
Macronix
-
MX29F040CTI-70G
Macronix