VNP10N07-E

圖片僅供參考

VNP10N07-E

IC PWR DRIVER N-CHAN 1:1 TO220AB

100%原創； 新

24小時準備發貨

365天保修

RFQ&； 獲得更多折扣

規格

Package Tube
Series OMNIFET™, VIPower™
ProductStatus Active
SwitchType General Purpose
NumberofOutputs 1
Ratio-Input:Output 1:1
OutputConfiguration Low Side
OutputType N-Channel
Interface On/Off
Voltage-Load 55V (Max)
Voltage-Supply(Vcc/Vdd) Not Required
Current-Output(Max) 14A
RdsOn(Typ) 100mOhm (Max)
InputType Non-Inverting
FaultProtection Current Limiting (Fixed), Over Temperature, Over Voltage
MountingType Through Hole
SupplierDevicePackage TO-220

概述

Description

VNP10N07-E is a single‑channel smart high‑side switch from STMicroelectronics’ VIPower family. It integrates a high‑side MOSFET and protection circuitry to drive a load from a supply rail in automotive/industrial environments.
Key features:
- Built‑in current limiting, thermal shutdown, undervoltage lockout
- Overvoltage/short‑circuit protection and reverse‑battery protection
- Open‑load detection and diagnostic (fault/STATUS) output
How it works:
- IN controls the switch; OUT powers the load from VS (the supply)
- Suitable for inductive or resistive loads (e.g., lamps, relays, actuators) in 12/24 V automotive systems
The E suffix typically indicates an enhanced/extended-temperature or automotive‑grade/ECOPACK packaging variant. For exact electrical specs (voltage range, current limit, Rds(on), fault thresholds), consult the ST datasheet.

Features

VNP10N07-E features:
- Single-channel smart high-side switch with integrated N-channel MOSFET
- Wide input voltage range for automotive/industrial use
- On-chip protections: undervoltage lockout, overcurrent/short-circuit protection (fast response), and overtemperature shutdown
- Current limiting with soft-start to control startup/inrush
- Enable (EN) input to enable/disable output
- Diagnostic/status reporting with fault indication
- Suitable for driving DC motors, solenoids, and LED drivers
- Compact package for space-constrained designs
- Reliable protection against fault events with auto-recovery after faults (where applicable)

Package

VNP10N07-E comes in an 8-pin SO-8 surface-mount package (Pb-free; E suffix indicates lead-free).

Pinout

- Pin count: 8 pins (8‑pin package, e.g., SO-8)
- Function: Smart high-side switch with an integrated N‑channel MOSFET (about 7 A/70 V class). Used to drive DC loads (e.g., motors) from logic signals, with built‑in protections (current limiting, undervoltage, overcurrent/overtemperature, fault/open‑load diagnostics) and a diagnostic/status output.

Manufacturer

Manufacturer: Vishay Intertechnology (Vishay).
What kind of company: Vishay is a global, publicly traded manufacturer of discrete semiconductors and passive electronic components (e.g., MOSFETs, diodes, resistors, capacitors) with worldwide operations.

Application

VNP10N07-E is an intelligent high-side power switch. Typical application areas:
- Automotive and industrial DC load switching (lamps, motors, solenoids, relays)
- LED lighting drivers and general power-switching
- Circuits requiring integrated protection (current limit, undervoltage/overcurrent, thermal shutdown)

船舶

運輸管道我們

通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。


運費參攷（DHL/FedEx）:

動態主要裝載: 運費從25美元到45美元（0.5公斤）不等，預計交貨時間為2-5個工作日。

聯邦快遞: 運費從25美元到40美元（0.5公斤）不等，預計交貨時間為3-7個工作日。

不斷電供應系統: 運費從25美元到45美元（0.5公斤）不等，預計交貨時間為3-7個工作日。

三硝基甲苯: 運費從25美元到65美元（0.5公斤）不等，預計交貨時間為3-7個工作日。

增强型短消息: 運費從30美元到50美元（0.5公斤）不等，預計交貨時間為7-15個工作日。

掛號: 運費為2-4美元（0.1公斤），預計交貨時間為5-20個工作日。

支付

Payment Methods

付款條件為100%預付。

現時，我們只接受以下付款方式:

1. 貝寶

2. 信用卡/借記卡

3. 電匯

類似的