圖片僅供參考

VND5E050MJTR-E

Name: VND5E050MJTR-E
Rating: 4.7 (12 reviews)

IC PWR SWTCH N-CHAN 1:1 PWRSSO12

製造商
製造商。部分 #VND5E050MJTR-E
包 HSOP12
資料表
有現貨的3473

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Package	Tape & Reel (TR),Cut Tape (CT)
Series	VIPower™
ProductStatus	Obsolete
SwitchType	General Purpose
NumberofOutputs	2
Ratio-Input:Output	1:1
OutputConfiguration	High Side
OutputType	N-Channel
Interface	On/Off
Voltage-Load	4.5V ~ 28V
Voltage-Supply(Vcc/Vdd)	Not Required
Current-Output(Max)	19A
RdsOn(Typ)	50mOhm (Max)
InputType	Non-Inverting
Features	Auto Restart
FaultProtection	Current Limiting (Fixed), Over Temperature, Over Voltage
OperatingTemperature	-40°C ~ 150°C (TJ)
MountingType	Surface Mount
SupplierDevicePackage	PowerSSO-12™

概述

Description

VND5E050MJTR-E is an automotive high-side smart load switch from STMicroelectronics’ VIPower family. It integrates a high-side MOSFET with protection and diagnostic features to drive loads directly from a microcontroller.
Key points:
- Ratings: supports automotive voltages up to ~60 V and typical load currents around 5 A.
- Protections: current limit/overcurrent, short-to-ground, overvoltage, undervoltage, and thermal shutdown.
- Diagnostics: built-in fault/diagnostic output to report status to the controller.
- Control: EN/IN input to enable/disable the switch.
- Packaging: small HV package (TR-E = tape-and-reel), suitable for automotive PCB assemblies.
- Applications: LED lighting, relays/solenoids, pumps, and other motor/actuator loads in vehicles.
In short, it provides a compact, protected, and easy-to-control high-side switch to simplify automotive load driving and reduce external components.

Features

Concise features of VND5E050MJTR-E:
- 1-channel high-side smart switch with integrated MOSFET, rated for about 5 A.
- Current limit with short-circuit protection and auto-retry.
- Thermal shutdown protection to prevent damage.
- Undervoltage lockout and overvoltage protection.
- Diagnostic feedback via DIAG/open-load status for MCU monitoring.
- Slew-rate control / soft-start to limit inrush current.
- Reverse polarity protection and safe-off behavior in fault conditions.
- Automotive-grade device (AEC-Q100 qualified) suitable for 12 V systems and load-dump tolerant designs.
- Suitable applications: automotive actuators, solenoids, LEDs, and other load-switched circuits.

Package

PowerSSO-28 (28-pin) package with an exposed pad; Tape & Reel (TR) version.

Pinout

- Pin count: 28-pin package (HTSSOP-28 style)
- Function: VIPower 5-channel high-side switch array with current limitation and diagnostic. Provides five integrated load switches (high-side) with protection (short-circuit/overcurrent, thermal), suitable for automotive loads (lamps, solenoids, etc.), controlled by IN/EN and monitored via diagnostic outputs.

Manufacturer

- Manufacturer: STMicroelectronics (ST)
- What kind of company: A global semiconductor and electronics company (multinational) that designs and manufactures integrated circuits, power devices, MEMS sensors, microcontrollers, and other semiconductor solutions.

Application

VND5E050MJTR-E is a 5-channel high-side switch designed for automotive body electronics. Applications: drive multiple loads (lamps, relays, solenoids, actuators, sensors, HVAC components) from a vehicle power line. Features include integrated protection and diagnostics: undervoltage, overcurrent/short-to-ground, short-to-battery, thermal shutdown, and current limiting, enabling safe, compact load switching and power distribution.

Equivalent

VND5E050MJTR-E is STMicroelectronics VIPower: a 60 V, ~5 A high-side smart switch with current limit and diagnostic.
Possible equivalents from other vendors:
- Infineon: TLE9250-1Q or TLE9255-1Q (60 V smart high-side switches)
- TI: TPS22960/TPS22962 (6 A load switches with diagnostic)
Note: exact cross-reference depends on package, current limit, and diagnostic features; verify electrical specs and pinout.