圖片僅供參考

TSOP77336TR

Name: TSOP77336TR
Rating: 4.7 (12 reviews)

SENSOR REMOTE REC 36.0KHZ 40M

製造商
製造商。部分 #TSOP77336TR
包
資料表
有現貨的6965

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Supplier	Vishay Semiconductor Opto Division
Package	Tape & Reel (TR)
Series	TSOP773
ProductStatus	Active
SensingDistance	40m
BPFCenterFrequency	36.0kHz
Voltage-Supply	2.5 V ~ 5.5 V
Current-Supply	700 µA
Orientation	Side View
MountingType	Surface Mount

概述

Description

TSOP77336TR is a 36 kHz infrared remote-control receiver in a 3-pin package. It contains a preamplifier, automatic gain control, and a demodulator with a digital output, designed to feed a microcontroller in consumer electronics.
Key points:
- Carrier: 36 kHz IR; filters ambient light and outputs the demodulated data envelope.
- Interface: Vcc 4.5–5.5 V, GND, OUT. Output is a digital, active-low signal; use a pull-up if required by your MCU.
- Package: TSOP-style; TR denotes Tape & Reel packaging; pins are GND, Vcc, and OUT (check exact orientation in the datasheet).
- Features: built-in AGC, noise rejection, supports standard IR protocols (e.g., NEC, RC-5) at typical data rates.
- Applications: TV remotes, set-top boxes, home automation sensors, general IR remote reception.
Tip: Always consult the datasheet for exact pinout, electrical limits, and recommended decoupling.

Features

TSOP77336TR features (concise):
- 36 kHz IR remote-control receiver with built-in demodulator
- Integrated preamplifier, automatic gain control, and envelope detector
- 3-pin package: Vcc, GND, OUT (data output); output is active-low
- No external components required; TTL/CMOS-compatible output
- Supply voltage typically 5 V (range ~4.5–5.5 V)
- Low current consumption; suitable for battery-powered apps
- Good ambient-light immunity and noise suppression
- Operating temperature commonly -25°C to +85°C
- Packaging: TSOP in Tape & Reel (TR) form factor for automated assembly
Note: exact electrical specs can vary by lot; refer to the manufacturer datasheet for precise numbers.

Pinout

- Pin count: 4 pins.
- Function: 36 kHz IR remote control receiver (demodulated output). It includes preamp, bandpass/AGC, and demodulator; outputs a digital signal (active low) representing the received remote command. Typical supply: 4.5–5.5 V.
- Common pinout (facing the front of the package): Pin 1 = GND, Pin 2 = Vcc, Pin 3 = OUT, Pin 4 = NC (no connect).

Manufacturer

- Manufacturer: Vishay Intertechnology, Inc.
- What kind of company: A global electronics components and semiconductors manufacturer, producing discrete semiconductors, optoelectronics (including IR receivers), resistors, capacitors, inductors, and other passive components.

Application

TSOP77336TR is a 36 kHz IR receiver with integrated preamp, AGC, demodulator and active-low output.
Applications:
- IR remote receivers for consumer electronics (TVs, DVDs, set-top boxes)
- Home appliances (air conditioners, audio systems)
- IR-based control in home automation and smart devices
- Robotics and hobby projects for remote command input
- Security/safety systems requiring simple IR command interfaces

Equivalent

TSOP77336TR is a 3.3 V, 36 kHz IR receiver with demodulated output in a 3-pin SMD package. Equivalents include:
- Direct drop-in: Vishay TSOP3836 (36 kHz, 3–5 V, same pinout)
- Other vendors offer similar 36 kHz IR receivers (3.3–5 V, 3 pins) that can be drop-in if pinout matches (Everlight, Sharp, Panasonic, etc.).