圖片僅供參考

TS5A22362DRCR

Name: TS5A22362DRCR
Rating: 4.7 (12 reviews)

IC SWITCH DUAL SPDT 10SON

製造商
製造商。部分 #TS5A22362DRCR
包 10-VFDFN Exposed Pad
資料表
有現貨的363

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Supplier	Texas Instruments
Package	Tape & Reel (TR),Cut Tape (CT)
ProductStatus	Active
SwitchCircuit	SPDT
Multiplexer/DemultiplexerCircuit	2:1
NumberofCircuits	2
On-StateResistance(Max)	740mOhm
Channel-to-ChannelMatching(ΔRon)	40mOhm
Voltage-SupplySingle(V+)	2.3V ~ 5.5V
SwitchTime(TonToff)(Max)	80ns, 70ns
-3dbBandwidth	18.3MHz
ChargeInjection	10pC
ChannelCapacitance(CS(off)CD(off))	70pF
Current-Leakage(IS(off))(Max)	50nA
Crosstalk	-78dB @ 100kHz
OperatingTemperature	-40°C ~ 85°C (TA)
MountingType	Surface Mount
Package/Case	10-VFDFN Exposed Pad

概述

Description

The TS5A22362DRCR is a Texas Instruments dual SPDT (single-pole double-throw) analog switch. It provides two independent signal paths that can route a common node to one of two destinations (or sources) under control of digital select signals.
Key points:
- Two independent SPDT analog switches in one 8-pin device.
- Suitable for low-voltage, single-supply operation with rail-to-rail analog signals.
- Features typically include low on-resistance, low leakage, fast switching, and break-before-make behavior.
- Control logic compatible with standard CMOS/TTL levels; protected against ESD.
- DRCR denotes a specific package variant for this part (commonly an 8-pin package).
Typical applications: audio/video routing, signal multiplexing in portable devices, sensor/legacy input routing, and other portable, battery-powered systems.
For exact electrical specifications, pinout, and operating conditions, refer to the TI datasheet for TS5A22362DRCR.

Features

TS5A22362DRCR is a dual, two-channel SPDT analog switch (two 2:1 multiplexers) in an 8-pin package. Key features:
- Wide supply: 1.65 V to 5.5 V
- Low on-resistance: typically a few ohms per switch with good matching
- Rail-to-rail signal path: input/output can swing from GND to VDD
- Low leakage and fast switching
- Independent control for each channel (no shared logic level shifting required)
- Break-before-make switching to avoid cross-conduction
- 8-pin DRCR package (VSSOP)
- Input/output ESD protection
- Temperature range commonly -40°C to 85°C (industrial grade)
For exact electrical specs (Ron, leakage, switching time, ESD level, and full-temp range), refer to the TI datasheet.

Package

8-pin small-outline package: VSSOP (MSOP) family.

Pinout

Pin count: 6 pins (SC-70/SOT-23-6 package).
Function: Dual SPDT analog switch (two 1:2 multiplexers) with a common control; used to route two analog signals between two paths.

Manufacturer

- Manufacturer: Texas Instruments (TI).
- What kind of company: An American multinational semiconductor company that designs and manufactures integrated circuits, especially analog and mixed-signal ICs; headquartered in Dallas, Texas, and one of the world’s largest IC makers.

Application

TS5A22362DRCR is a dual, low-leakage, low-on-resistance analog switch. Typical application areas include:
- Portable consumer electronics (phones, tablets, wearables) for routing audio and sensor signals
- Analog signal multiplexing/demultiplexing in data acquisition and instrumentation front-ends (ADC/DAC paths)
- Microphone/headphone/speaker path switching in audio interfaces
- Power-sensitive systems requiring low leakage and fast, glitch-free switching
- Test and lab equipment for flexible signal routing and signal-path selection

Equivalent

TS5A22362DRCR is a dual SPDT (2:1) analog switch. Common equivalents from other vendors:
- Analog Devices: ADG731, ADG732
- Maxim Integrated: MAX4617, MAX4620
Note: verify supply range, on-resistance, break-before-make behavior, and package/pinout for exact cross-reference.