圖片僅供參考

TQ2SA-L2-12V

Name: TQ2SA-L2-12V
Rating: 4.7 (12 reviews)

RELAY TELECOM DPDT 500MA 12V

製造商
製造商。部分 #TQ2SA-L2-12V
包
資料表
有現貨的29876

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Series	TQ-SMD
Part Status	Active
Base Product Number	TQ2SA
Mounting Type	Surface Mount
Coil Voltage	12VDC
Contact Form	DPDT (2 Form C)
Contact Rating (Current)	500 mA
Switching Voltage	125VAC, 220VDC - Max
Load - Max Switching	250VA, 440W
Coil Current	11.7 mA
Coil Type	Latching, Dual Coil
Termination Style	Gull Wing
Must Operate Voltage	9 VDC
Operate Time	4 ms
Release Time	4 ms
Operating Temperature	-40°C ~ 85°C
Contact Material	Silver Nickel (AgNi), Gold (Au)
Approval Agency	cURus
Relay Type	Telecom
Packaging	Tube

概述

Description

I’m not sure which vendor uses that exact part number, so I can’t give a precise intro without the manufacturer. Could you share the maker or the product family?
If you just need a quick generic intro: TQ2SA-L2-12V is typically a small 12‑V DC device used in automation (often a relay/actuator module or a solenoid assembly). It would usually feature:
- A 12 V DC coil for actuation
- A compact housing suitable for panel or DIN-rail mounting
- A contact/output configuration (e.g., SPDT/DPDT) or a drive output for a load
- Basic protection and life specs suitable for industrial control
Common uses include control panels, robotics, conveyors, and machinery where a 12V control signal switches a higher-power circuit.
For an exact, vendor-specific introduction, please provide the manufacturer or datasheet link.

Package

PCB-mounted through-hole relay (Omron TQ2SA series) with a 12 V DC coil.

Pinout

8 pins. It’s a DPDT (two form C) 12 V DC relay with two independent changeover contact sets (each pole: COM, NC, NO) driven by a 12 V coil.

Equivalent

I don’t have the exact datasheet for TQ2SA‑L2‑12V. If it’s a 2‑pole 12 VDC signal relay, common equivalents to check are: Omron G6K‑2P (12VDC), Panasonic TQ2 series (12V variants), Hongfa HF32F‑012 (2‑pole types). Always verify coil voltage/current, contact arrangement, pinout and contact ratings against the datasheet before substituting.