圖片僅供參考
TPS79625DCQ
IC REG LINEAR 2.5V 1A SOT223-6
- 製造商
- 製造商。 部分 #TPS79625DCQ
- 包 SOT-223-6
- 資料表 TPS79625DCQ DataSheet
- 有現貨的3007
100%原創; 新
24小時準備發貨
365天保修
RFQ&; 獲得更多折扣
規格
| Package | Bulk,Tube |
| ProductStatus | Active |
| OutputConfiguration | Positive |
| OutputType | Fixed |
| NumberofRegulators | 1 |
| Voltage-Input(Max) | 5.5V |
| Voltage-Output(Min/Fixed) | 2.5V |
| Current-Output | 1A |
| Current-Quiescent(Iq) | 385 µA |
| PSRR | 59dB ~ 42dB (100Hz ~ 100kHz) |
| ControlFeatures | Enable |
| ProtectionFeatures | Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO) |
| OperatingTemperature | -40°C ~ 125°C |
| MountingType | Surface Mount |
| Package/Case | SOT-223-6 |
概述
Description
TPS79625DCQ is a fixed-output, low-dropout (LDO) linear regulator from Texas Instruments. It provides a stable 2.5 V rail from a higher input supply, suitable for portable and battery-powered electronics.
Key features
- Fixed 2.5 V output
- Enable/shutdown control
- Overcurrent and thermal protection
- Low dropout for modest headroom between VIN and VOUT
- Ultra-low quiescent current (typical)
Package
- DCQ: a compact TI QFN-style package
Typical applications
- MCU, sensors, memory, and other low-power rails in wearables and handheld devices
How to use (high level)
- Connect VIN to the supply and VOUT to the load
- Add recommended input/output capacitors (low-ESR) per the datasheet
- Tie EN high to enable (low to disable)
- Ensure adequate thermal management
For exact electrical specs, package details, and layout guidance, consult the TI TPS79625DCQ datasheet and product page.
Key features
- Fixed 2.5 V output
- Enable/shutdown control
- Overcurrent and thermal protection
- Low dropout for modest headroom between VIN and VOUT
- Ultra-low quiescent current (typical)
Package
- DCQ: a compact TI QFN-style package
Typical applications
- MCU, sensors, memory, and other low-power rails in wearables and handheld devices
How to use (high level)
- Connect VIN to the supply and VOUT to the load
- Add recommended input/output capacitors (low-ESR) per the datasheet
- Tie EN high to enable (low to disable)
- Ensure adequate thermal management
For exact electrical specs, package details, and layout guidance, consult the TI TPS79625DCQ datasheet and product page.
Features
TPS79625DCQ is a fixed-output low-dropout regulator from TI. Key features:
- Fixed output: 2.5 V
- Max load current: up to several hundred mA (typical around 250 mA)
- Low dropout voltage for efficient operation
- Very low quiescent current
- Enable (EN) input for shutdown control
- Protective features: thermal shutdown and current-limit protection
- Strong line/load regulation and PSRR
- Suitable for small, low-profile packages (DCQ variant)
Note: exact current rating, dropout, and input range can vary by device revision; consult the datasheet for precise numbers.
- Fixed output: 2.5 V
- Max load current: up to several hundred mA (typical around 250 mA)
- Low dropout voltage for efficient operation
- Very low quiescent current
- Enable (EN) input for shutdown control
- Protective features: thermal shutdown and current-limit protection
- Strong line/load regulation and PSRR
- Suitable for small, low-profile packages (DCQ variant)
Note: exact current rating, dropout, and input range can vary by device revision; consult the datasheet for precise numbers.
Package
TPS79625DCQ is in an 8-pin VSSOP package (VSSOP-8).
Pinout
8 pins. It is a fixed 2.5 V low-dropout regulator (LDO) with an enable pin; takes input up to about 5.5 V and provides a regulated 2.5 V output when enabled.
Manufacturer
Manufacturer: Texas Instruments (TI).
Kind of company: TI is an American multinational semiconductor company that designs and manufactures analog and mixed-signal integrated circuits and embedded processing solutions used in a wide range of electronic devices.
Kind of company: TI is an American multinational semiconductor company that designs and manufactures analog and mixed-signal integrated circuits and embedded processing solutions used in a wide range of electronic devices.
Application
TPS79625DCQ is a fixed 2.5-V LDO in a compact package. Typical applications:
- Generate a clean 2.5-V rail in embedded systems (MCUs, memories, logic cores, PMIC rails)
- Power noise-sensitive analog/digital front-ends (op-amps, ADC/DAC, sensors, RF transceivers)
- Battery-powered/mobile devices requiring low quiescent current and small footprint
- Post-regulation stage after switching regulators
- Small handheld devices and wearables with space constraints
- Generate a clean 2.5-V rail in embedded systems (MCUs, memories, logic cores, PMIC rails)
- Power noise-sensitive analog/digital front-ends (op-amps, ADC/DAC, sensors, RF transceivers)
- Battery-powered/mobile devices requiring low quiescent current and small footprint
- Post-regulation stage after switching regulators
- Small handheld devices and wearables with space constraints
Equivalent
TPS79625DCQ is TI’s fixed 2.5 V low-dropout regulator (about 150 mA). There isn’t a single universal cross‑reference. For exact substitutes, use TI’s Cross Reference tool. In general, other vendors’ 2.5 V fixed LDOs with similar current include Microchip MCP1700-2.5 and AMS1117-2.5; however, verify dropout, quiescent current, and package/pinout to ensure compatibility.
船舶
運輸管道我們
通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。
運費參攷(DHL/FedEx):
動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。
聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。
掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。
支付
Payment Methods
付款條件為100%預付。
現時,我們只接受以下付款方式:
1. 貝寶
2. 信用卡/借記卡
3. 電匯
類似的
-
MX25L3233FZBI-08Q
Macronix
-
MX25L3233FM1I-08Q
Macronix
-
MX29F400CBTI-70G
Macronix
-
MX25V2033FM1I
Macronix
-
MX25R3235FZNIL0
Macronix
-
MX30LF2G28AD-TI
Macronix
-
MX29GL512FHXFI-11..
Macronix
-
MX25U25643GZNI00
Macronix
-
MX25U6435FM2I-10G
Macronix
-
MX25L12833FM2I-10..
Macronix
-
MX25L12835FZ2I-10..
Macronix
-
MX25L25645GXDI-08..
Macronix