圖片僅供參考

TMP431DDGKR

Name: TMP431DDGKR
Rating: 4.7 (12 reviews)

SENSOR DIGITAL -40C-125C 8VSSOP

製造商
製造商。部分 #TMP431DDGKR
包 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
資料表
有現貨的9900

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Supplier	Texas Instruments,Rochester Electronics, LLC
Package	Tape & Reel (TR),Cut Tape (CT),Bulk
ProductStatus	Active
SensorType	Digital, Local/Remote
SensingTemperature-Local	-40°C ~ 125°C
SensingTemperature-Remote	-64°C ~ 191°C
OutputType	SMBus
Voltage-Supply	2.7V ~ 5.5V
Resolution	12 b
Features	One-Shot, Output Switch, Programmable Limit, Programmable Resolution, Shutdown Mode
Accuracy-Highest(Lowest)	±1°C (±2.5°C)
TestCondition	0°C ~ 100°C (-40°C ~ 125°C)
OperatingTemperature	-55°C ~ 127°C
MountingType	Surface Mount
Package/Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

概述

Description

TMP431DDGKR is TI’s 1‑channel digital temperature sensor with a two‑wire I2C/SMBus interface. It provides a temperature reading from the die or ambient and supports a configurable alert/shutdown function for thermal monitoring. The DDGKR suffix denotes the specific package variant and lot code (commonly an 8‑pin device in VSSOP/SOIC packages). Typical uses include CPU/GPU or system temperature monitoring and general thermal management in embedded and consumer electronics. For exact electrical specs, pinout, and the register map, refer to the TMP431 datasheet.

Features

TMP431DDGKR is a digital, I2C‑programmable shunt voltage reference/regulator. Key features (typical):
- I2C/SMBus-compatible interface to set and read the output reference
- Nominal reference: ~2.495 V (2.5 V class)
- Wide supply range: ~2.7 V to 5.5 V
- Output/shunt current programmable via I2C (configurable operating point)
- 8‑pin DDGKR package
- Built‑in protections: overcurrent/current limit and thermal shutdown
- Low quiescent current
- Good accuracy over temperature (datasheet specifies tight tolerance; typical ~0.5–1% depending on mode)
- Industrial temperature range (typical) suitable for precision references and regulator front-ends
Note: exact electrical specs (accuracy, current capability, frequency response) vary by revision. For precise values, refer to the TMP431 family datasheet.

Package

An 8-pin VSSOP (Very-Small-Outline Package).

Pinout

- Pin count: 3 pins (SOT-23-3 package).
- Pin functions:
- Pin 1 — REF: reference/feedback input for the internal error amplifier.
- Pin 2 — CATHODE (K): shunt output/sink terminal.
- Pin 3 — ANODE (A): return/ground terminal.
- Device function: TMP431DDGKR is a programmable precision shunt voltage reference (TL431-style). It provides an internal bandgap reference and error amplifier; the cathode-to-anode voltage is regulated by comparing the REF pin voltage to the internal reference and sinking current as needed. External resistor divider between Cathode and REF sets the regulated threshold.

Manufacturer

Manufacturer: Toshiba Electronic Devices & Storage Corporation (part number TMP431DDGKR).
What kind of company: Toshiba Electronic Devices & Storage is a Japanese multinational semiconductor and electronic components company that designs and manufactures ICs, discrete semiconductors, power devices, sensors and related components for consumer, industrial and automotive markets.

Application

TMP431DDGKR is a precision programmable shunt regulator/voltage reference. Typical applications:
- DC-DC converter feedback regulation and linear regulator references
- Battery charging and protection circuits
- Voltage reference for ADC/DAC and precision instrumentation
- Overvoltage protection and current regulation in telecom/industrial equipment
- General regulation/reference duties in consumer electronics and industrial applications

Equivalent

TMP431 is a programmable precision shunt regulator. Common equivalents (subject to matching Vref, tolerance, temp-coef and package) include: TL431 (TI/ST), TLV431 (low-voltage variant), AZ431 (Diodes Inc), KA431, and other LM431-family devices (LM431/LMV431). Always verify pinout and electrical specs before substituting.