圖片僅供參考
TBD62503APG
IC PWR SWITCH N-CHAN 1:1 16DIP
- 製造商
- 製造商。 部分 #TBD62503APG
- 包
- 資料表 TBD62503APG DataSheet
- 有現貨的8209
100%原創; 新
24小時準備發貨
365天保修
RFQ&; 獲得更多折扣
規格
| Part Status | Active |
| Switch Type | General Purpose |
| Number of Outputs | 7 |
| Ratio - Input:Output | 1:1 |
| Output Configuration | Low Side |
| Output Type | N-Channel |
| Interface | On/Off |
| Voltage - Load | 50V (Max) |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Current - Output (Max) | 300mA |
| Input Type | Inverting |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Through Hole |
| Supplier Device Package | 16-DIP |
| Package / Case | 16-DIP (0.300", 7.62mm) |
| Base Product Number | TBD62503 |
概述
Description
TBD62503APG is a specific product or component designation, likely pertaining to electronics or semiconductors, though details may vary based on the manufacturer. Without specific context, it could refer to an integrated circuit, a type of sensor, or another electronic device. Typically, such designations include information about the part's function, features, and specifications.
For comprehensive understanding, one should refer to the datasheet or technical documentation provided by the manufacturer. This documentation usually includes critical information such as pin configuration, electrical characteristics, operating conditions, and application examples, which are essential for proper implementation and integration into electronic systems. If you have a specific context or application in mind, additional details could help narrow down the information further.
For comprehensive understanding, one should refer to the datasheet or technical documentation provided by the manufacturer. This documentation usually includes critical information such as pin configuration, electrical characteristics, operating conditions, and application examples, which are essential for proper implementation and integration into electronic systems. If you have a specific context or application in mind, additional details could help narrow down the information further.
Features
The TBD62503APG is a high-voltage, high-speed phototransistor designed for use in various applications such as optical isolators and signal transmission. Key features include:
1. High Voltage: It can handle high collector-emitter voltages, making it suitable for demanding applications.
2. Fast Switching Speed: The device is capable of rapid switching, which enhances performance in high-frequency applications.
3. Compact Package: It is available in a small form factor, facilitating space-saving designs in electronic circuits.
4. High Sensitivity: The phototransistor has a high sensitivity, allowing for effective light detection even at low illumination levels.
5. Low Power Consumption: The design ensures minimal power usage, contributing to energy-efficient applications.
6. Wide Operating Temperature Range: It operates effectively across a broad range of temperatures, ensuring reliability in diverse environments.
These features make the TBD62503APG suitable for industrial, consumer electronics, and telecommunications applications.
1. High Voltage: It can handle high collector-emitter voltages, making it suitable for demanding applications.
2. Fast Switching Speed: The device is capable of rapid switching, which enhances performance in high-frequency applications.
3. Compact Package: It is available in a small form factor, facilitating space-saving designs in electronic circuits.
4. High Sensitivity: The phototransistor has a high sensitivity, allowing for effective light detection even at low illumination levels.
5. Low Power Consumption: The design ensures minimal power usage, contributing to energy-efficient applications.
6. Wide Operating Temperature Range: It operates effectively across a broad range of temperatures, ensuring reliability in diverse environments.
These features make the TBD62503APG suitable for industrial, consumer electronics, and telecommunications applications.
Package
The TBD62503APG is typically available in a surface-mount package type known as a SOP (Small Outline Package). It is designed for compact applications in electronic circuits.
Pinout
The TBD62503APG is a high-voltage, high-speed MOSFET driver. It features a total of 8 pins. Here’s a brief overview of the pin functions:
1. VCC: Power supply for the driver.
2. GND: Ground reference.
3. IN: Input signal to control the driver (logic level).
4. OUT: Output to drive the gate of the MOSFET.
5. VS: Source voltage pin for the high-side driver.
6. BOOT: Bootstrap capacitor connection for high-side gate drive.
7. NC: No connect; not internally connected (reserved for future use).
8. CS: Current sense pin for monitoring.
The TBD62503APG is designed for applications requiring fast switching and high efficiency, commonly used in motor drivers and power management systems.
1. VCC: Power supply for the driver.
2. GND: Ground reference.
3. IN: Input signal to control the driver (logic level).
4. OUT: Output to drive the gate of the MOSFET.
5. VS: Source voltage pin for the high-side driver.
6. BOOT: Bootstrap capacitor connection for high-side gate drive.
7. NC: No connect; not internally connected (reserved for future use).
8. CS: Current sense pin for monitoring.
The TBD62503APG is designed for applications requiring fast switching and high efficiency, commonly used in motor drivers and power management systems.
Manufacturer
The TBD62503APG is manufactured by Toshiba Semiconductor and Storage Company, a division of Toshiba Corporation. Toshiba is a multinational conglomerate based in Japan, known for its diverse range of products and services, including electronics, electrical equipment, and information technology. The company specializes in the design and production of semiconductors, including integrated circuits and discrete components, alongside other technologies like storage devices and consumer electronics. Toshiba has a strong presence in the global market and is recognized for its innovation in various sectors, including automotive, industrial, and consumer applications.
Application
The TBD62503APG is a high-voltage, high-speed optocoupler primarily used in applications such as industrial automation, motor control, power supply systems, and signal isolation. Its features make it suitable for analog and digital signal transmission, providing electrical isolation in challenging environments, and ensuring safe operations in mixed-voltage systems.
Equivalent
The TBD62503APG is a high-voltage, high-speed, dual H-bridge driver IC. Equivalent products include the TB62703APG, TB62701APG, and the L6206. For specific applications, check datasheets for compatibility regarding voltage ratings, current capacities, and functionality.
船舶
運輸管道我們
通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。
運費參攷(DHL/FedEx):
動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。
聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。
掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。
支付
Payment Methods
付款條件為100%預付。
現時,我們只接受以下付款方式:
1. 貝寶
2. 信用卡/借記卡
3. 電匯
類似的
-
MX25L3233FZBI-08Q
Macronix
-
MX25L3233FM1I-08Q
Macronix
-
MX25V1635FZNQ03
Macronix
-
MX25V16066M2I02
Macronix
-
MX25L8035EM2I-10G
Macronix
-
MX25R6435FBDIL0
Macronix
-
MX25U51279GXDR00
Macronix
-
MX25U25643GZNI00
Macronix
-
MX25L2006EM1I-12G
Macronix
-
MX25U6435FM2I-10G
Macronix
-
MX25L12833FZ2I-10..
Macronix
-
MX29LV160DTTI-70G
Macronix