圖片僅供參考

T495D107K010ATE100

Name: T495D107K010ATE100
Rating: 4.7 (12 reviews)

CAP TANT 100UF 10% 10V 2917

製造商
製造商。部分 #T495D107K010ATE100
包
資料表
有現貨的14680

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Series	T495
Part Status	Active
Base Product Number	T495D
Capacitance	100 µF
Tolerance	±10%
Voltage - Rated	10 V
Type	Molded
ESR (Equivalent Series Resistance)	100mOhm
Operating Temperature	-55°C ~ 125°C
Lifetime @ Temp.	2000 Hrs @ 85°C
Mounting Type	Surface Mount
Package	2917 (7343 Metric)
Size / Dimension	0.287" L x 0.169" W (7.30mm x 4.30mm)
Height - Seated (Max)	0.122" (3.10mm)
Manufacturer Size Code	D
Features	General Purpose
Packaging	Cut Tape (CT), Tape & Reel (TR)

概述

Description

Introduction: T495D107K010ATE100 is a catalog number for a surface-mount solid tantalum capacitor (T495D series). The code breaks down as follows:
- 107 = 100 µF
- K = ±10% tolerance
- 010 = 10 V rating
- A = case/size style
- ATE100 (suffix) = vendor-specific packaging/finish (often lead-free)
Typical use: decoupling and energy storage on compact or low-profile boards.
What to verify in the datasheet:
- ESR and ripple current
- Absolute max and rated voltage
- Operating temperature range (often -55°C to +125°C)
- Physical size and termination style
- Polarity marking and reflow compatibility
Note: Exact meaning of the suffix and the precise electrical specs can vary by manufacturer. To be sure, look up the specific datasheet for your vendor’s T495D107K010ATE100 part.

Features

Key features of T495D107K010ATE100 (Vishay T495D series):
- Capacitance: 100 µF (code 107)
- Tolerance: ±10% (K)
- Voltage rating: 10 V (010)
- Type: Tantalum solid electrolyte, molded epoxy case
- Mounting: Surface-mount (SMT), D-case size
- Temperature range: -55°C to +125°C
- ESR/Ripple: Low ESR with good ripple current capability
- Reliability: High reliability, long life
- Compliance: RoHS compliant
Note: Exact values (e.g., ESR, ripple current) vary by lot; refer to the datasheet for precise specs.

Package

SMT molded chip capacitor (tantalum/polymer) in a D‑case size (SMD package).

Pinout

- Pin count: 2 terminals (two-terminal device)
- Function: Molded tantalum capacitor (Vishay T495 series) rated 100 µF, 10 V, tolerance ±10% (107K010). Polarized: positive terminal is the anode, negative terminal is the cathode. Used for decoupling/filtering in power rails.

Manufacturer

- Manufacturer: KEMET (Kemet Electronics Corporation).
- What kind of company: A global manufacturer of electronic components, specializing in passive components such as capacitors (tantalum, ceramic, film), inductors, and related parts.

Application

Typical application areas for T495D107K010ATE100:
- DC power-rail decoupling and bulk energy storage
- Smoothing ripple in switching regulators and VRMs
- Filtering and noise suppression in automotive, industrial, and consumer electronics
- Stabilizing supply voltages for processors, FPGAs, and other ICs
- General purpose power-management applications requiring relatively high capacitance at moderate voltage (about 10 V) and low ESR.

Equivalent

T495D107K010ATE100 is a Vishay molded tantalum capacitor: 100 µF, 10 V, tolerance ±10% (K), Case A.
Equivalents: other 100 µF, 10 V molded tantalum capacitors in the same Case A form factor from major vendors (e.g., AVX, KEMET, Nichicon, Murata). For exact cross-references, please specify your preferred supplier and packaging. I can provide vendor-specific part numbers.