圖片僅供參考
STM32L011F3U3TR
IC MCU 32BIT 8KB FLASH 20UFQFPN
- 製造商
- 製造商。 部分 #STM32L011F3U3TR
- 包 20-UFQFN
- 資料表 STM32L011F3U3TR DataSheet
- 有現貨的4189
100%原創; 新
24小時準備發貨
365天保修
RFQ&; 獲得更多折扣
規格
| Supplier | STMicroelectronics |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Series | STM32L0 |
| ProductStatus | Active |
| CoreProcessor | ARM® Cortex®-M0+ |
| CoreSize | 32-Bit Single-Core |
| Speed | 32MHz |
| Connectivity | I²C, IrDA, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| NumberofI/O | 16 |
| ProgramMemorySize | 8KB (8K x 8) |
| ProgramMemoryType | FLASH |
| EEPROMSize | 512 x 8 |
| RAMSize | 2K x 8 |
| Voltage-Supply(Vcc/Vdd) | 1.65V ~ 3.6V |
| DataConverters | A/D 7x12b |
| OscillatorType | Internal |
| OperatingTemperature | -40°C ~ 125°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 20-UFQFN |
概述
Description
STM32L011F3U3TR is a low-power, 32‑bit microcontroller from ST’s STM32L0 family. It targets energy‑constrained apps (battery, wearables, sensing) with an ARM Cortex‑M0+ core.
Key points:
- Core and speed: ARM Cortex‑M0+ up to about 32 MHz.
- Power: multiple ultra‑low‑power modes with fast wakeup; optimized for low current in run/stop/ standby.
- Voltage: wide VDD range (often 1.65–3.6 V).
- Memory: Flash up to tens of kilobytes; RAM a few kilobytes (variant dependent).
- Peripherals: 12‑bit ADC, comparators/OPAMP, timers, RTC, and common interfaces (I2C, SPI, USART).
- Debug/programming: SWD/JTAG compatible.
- Package: compact U3 package (tape and reel).
Note: exact Flash/RAM, I/O count, and peripheral set vary by exact revision. Consult the datasheet/product page for the precise specs of your part. If you want, I can pull the exact numbers for STM32L011F3U3TR.
Key points:
- Core and speed: ARM Cortex‑M0+ up to about 32 MHz.
- Power: multiple ultra‑low‑power modes with fast wakeup; optimized for low current in run/stop/ standby.
- Voltage: wide VDD range (often 1.65–3.6 V).
- Memory: Flash up to tens of kilobytes; RAM a few kilobytes (variant dependent).
- Peripherals: 12‑bit ADC, comparators/OPAMP, timers, RTC, and common interfaces (I2C, SPI, USART).
- Debug/programming: SWD/JTAG compatible.
- Package: compact U3 package (tape and reel).
Note: exact Flash/RAM, I/O count, and peripheral set vary by exact revision. Consult the datasheet/product page for the precise specs of your part. If you want, I can pull the exact numbers for STM32L011F3U3TR.
Features
Key features of STM32L011F3U3TR (STM32L0 ultra‑low‑power line):
- CPU: 32-bit ARM Cortex‑M0+ core, up to 32 MHz.
- Power: ultra‑low‑power design with multiple run/stop/standby modes; very low wake‑up currents for battery‑powered apps.
- Memory: up to 16 KB Flash and up to 4 KB SRAM (typical for value devices in this family).
- Peripherals: 12‑bit ADC with analog features; multiple timers (including 16‑bit timers); DMA; standard serial comms: USART/UART, SPI, I2C.
- Real‑time/clock: RTC with LSE/low‑speed clock support.
- Security/ROM: built‑in bootloader, CRC engine, and read‑out protection options.
- I/O: multiple GPIOs with digital peripherals and basic PWM capabilities.
- Operating voltage/temperature: 1.65–3.6 V; operating temp range typically −40°C to 85°C.
- Packaging: compact, suitable for small-footprint designs.
Note: exact RAM/Flash counts and peripheral counts can vary by specific package/variant; verify against the datasheet for your exact device revision.
- CPU: 32-bit ARM Cortex‑M0+ core, up to 32 MHz.
- Power: ultra‑low‑power design with multiple run/stop/standby modes; very low wake‑up currents for battery‑powered apps.
- Memory: up to 16 KB Flash and up to 4 KB SRAM (typical for value devices in this family).
- Peripherals: 12‑bit ADC with analog features; multiple timers (including 16‑bit timers); DMA; standard serial comms: USART/UART, SPI, I2C.
- Real‑time/clock: RTC with LSE/low‑speed clock support.
- Security/ROM: built‑in bootloader, CRC engine, and read‑out protection options.
- I/O: multiple GPIOs with digital peripherals and basic PWM capabilities.
- Operating voltage/temperature: 1.65–3.6 V; operating temp range typically −40°C to 85°C.
- Packaging: compact, suitable for small-footprint designs.
Note: exact RAM/Flash counts and peripheral counts can vary by specific package/variant; verify against the datasheet for your exact device revision.
Package
20‑pin UFQFPN (3×3 mm) package, UFQFPN20; taped and reeled (TR).
Pinout
- Pin count: 20 pins (package: UFQFPN20/UQFN20).
- Function: A STM32L0 series low-power 32-bit microcontroller (ARM Cortex-M0+) for embedded control, with on-chip flash and RAM and peripherals such as GPIO, ADC, timers, and serial interfaces (USART/UART, I2C, SPI) for ultra-low-power applications.
- Function: A STM32L0 series low-power 32-bit microcontroller (ARM Cortex-M0+) for embedded control, with on-chip flash and RAM and peripherals such as GPIO, ADC, timers, and serial interfaces (USART/UART, I2C, SPI) for ultra-low-power applications.
Manufacturer
- Manufacturer: STMicroelectronics (STMicro)
- What kind of company: A multinational semiconductor company headquartered in Geneva, Switzerland. It designs, develops, manufactures, and markets microelectronics and silicon solutions (including microcontrollers like STM32, MEMS sensors, analog and power ICs) for automotive, industrial, consumer, and communications markets.
- What kind of company: A multinational semiconductor company headquartered in Geneva, Switzerland. It designs, develops, manufactures, and markets microelectronics and silicon solutions (including microcontrollers like STM32, MEMS sensors, analog and power ICs) for automotive, industrial, consumer, and communications markets.
Application
STM32L011F3U3TR is an ultra-low-power STM32L0 MCU. Typical application areas:
- Wearables and health-monitoring devices
- Battery-powered IoT sensors and beacons
- Smart home/building automation sensors and controllers
- Industrial sensors and portable instrumentation
- Data loggers and energy/meters
- Medical/portable devices requiring long battery life
- Energy-harvesting or battery-assisted devices
- Wearables and health-monitoring devices
- Battery-powered IoT sensors and beacons
- Smart home/building automation sensors and controllers
- Industrial sensors and portable instrumentation
- Data loggers and energy/meters
- Medical/portable devices requiring long battery life
- Energy-harvesting or battery-assisted devices
Equivalent
There isn’t a single exact equivalent. Do you want:
- ST cross-references (within STM32 line), or
- cross‑vendor equivalents?
Also provide your requirements: required flash/RAM, desired peripherals, package size, voltage, and operating temp. I’ll give precise substitutes.
- ST cross-references (within STM32 line), or
- cross‑vendor equivalents?
Also provide your requirements: required flash/RAM, desired peripherals, package size, voltage, and operating temp. I’ll give precise substitutes.
船舶
運輸管道我們
通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。
運費參攷(DHL/FedEx):
動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。
聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。
掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。
支付
Payment Methods
付款條件為100%預付。
現時,我們只接受以下付款方式:
1. 貝寶
2. 信用卡/借記卡
3. 電匯
類似的
-
MX25R8035FM1IL0
Macronix
-
MX29F400CBTI-70G
Macronix
-
MX25V4035FZUI
Macronix
-
MX25V16066M1I02
Macronix
-
MX25R3235FZNIL0
Macronix
-
MX30LF2G28AD-TI
Macronix
-
MX25L25673GMI-10G
Macronix
-
MX25L2006EM1I-12G
Macronix
-
MX25L6433FM2I-08G
Macronix
-
MX25L12833FZ2I-10..
Macronix
-
MX25L12833FZNI-10..
Macronix
-
MX29F040CQI-70G
Macronix