圖片僅供參考

STM32F479NIH6

Name: STM32F479NIH6
Rating: 4.7 (12 reviews)

IC MCU 32BIT 2MB FLASH 216TFBGA

製造商
製造商。部分 #STM32F479NIH6
包
資料表
有現貨的5763

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Series	STM32F4
Part Status	Active
DigiKey Programmable	Not Verified
Core Processor	ARM® Cortex®-M4
Core Size	32-Bit Single-Core
Speed	180MHz
Connectivity	CANbus, EBI/EMI, Ethernet, I2C, IrDA, LINbus, SAI, SDIO, SPI, UART/USART, USB, USB OTG
Peripherals	Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT
Number of I/O	161
Program Memory Size	2MB (2M x 8)
Program Memory Type	FLASH
RAM Size	384K x 8
Voltage - Supply (Vcc/Vdd)	1.7V ~ 3.6V
Data Converters	A/D 24x12b; D/A 2x12b
Oscillator Type	Internal
Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount
Supplier Device Package	216-TFBGA (13x13)
Package / Case	216-TFBGA
Base Product Number	STM32F479

概述

Description

STM32F479NIH6 is a high‑performance MCU from STMicroelectronics’ STM32F4 family. It uses a 32‑bit ARM Cortex‑M4F core with hardware FPU and DSP instructions, running up to 180 MHz. The NIH6 suffix indicates a 100‑pin LQFP package (industrial temp range; verify exact packaging in the datasheet).
Key features (typical for this family): rich GPIO and timers, multiple 12‑bit ADCs and DAC, USB OTG (FS), USART/UART, SPI, I2C, SDIO, and memory interfaces for external RAM/Flash; plus an LCD‑TFT graphics controller in many variants. On‑chip memory sizes (Flash/RAM) vary by part, suitable for mid‑range embedded applications.
Development is supported by ST’s ecosystem: STM32CubeMX, HAL/LL drivers, and ST‑Link for debugging. Common use cases include motor control, audio, graphics displays, data acquisition, and general-purpose high‑performance embedded systems. For exact memory sizes, peripherals, and the package, consult the STM32F479NIH6 datasheet and reference manuals.

Features

STM32F479NIH6 features (highlights)
- Core: 32-bit ARM Cortex-M4F with FPU and DSP instructions
- Speed: up to 180 MHz
- Memory: up to 2 MB Flash; up to 256 KB SRAM
- USB: USB OTG Full-Speed
- Connectivity: CAN 2.0B, SDIO, SPI, I2C, USART/UART (plus LPUART)
- Analog: 12-bit ADC (multi-channel), 12-bit DAC
- Graphics/Display: LTDC (LCD-TFT) controller and DMA2D for graphics
- Memory interface: Flexible Memory Controller (external memory support)
- Data/CRC: hardware CRC engine
- Timers: multiple general-purpose and advanced-TIMs (TIM1 involved)
- DMA: dedicated DMA controller with multiple streams/channels
- Power/voltage: 1.7–3.6 V supply, various low-power modes
- Package: LQFP-100 (NIH6) Pin count and footprint
- Temp range: industrial-grade operating range (-40 to 85 °C)
Note: exact RAM/Flash sizes and peripheral counts can vary by exact device variant; refer to the datasheet for precise numbers.

Package

LQFP-100 package (100-pin LQFP, 14×14 mm).

Pinout

- Pin count: 144 pins (LQFP-144 package).
- Function: STM32F479NIH6 is a 32-bit ARM Cortex-M4 microcontroller (STM32F4 family) for embedded applications, with integrated peripherals such as USB OTG FS, CAN, multiple SPI/I2C/UART, ADC/DAC, timers, and LCD controller.

Manufacturer

- Manufacturer: STMicroelectronics (ST)
- Company type: A multinational semiconductor company (electronics chip designer and manufacturer) headquartered in Geneva, Switzerland; known for microcontrollers (including STM32), sensors, analog and power ICs.

Application

Common application areas for STM32F479NIH6 include:
- Industrial automation and motor control
- HMI and TFT/LCD display panels
- Audio, DSP, and multimedia applications
- USB peripherals, data logging, and connectivity
- Portable medical and sensing equipment
- Robotics and embedded control systems
- Smart consumer devices and home automation with USB/SDIO
- High-performance embedded applications needing DSP, timers, ADC/DAC, and USB features

Equivalent

Closest equivalents (same Cortex‑M4 core and similar peripherals) are within ST’s STM32F4 family:
- STM32F429/439 series
- STM32F469/479 series
- STM32F407/417 series (older but widely drop‑in in many designs)
Non‑ST options with similar capabilities: NXP LPC4088/LPC43xx, Microchip SAM4S.
Note: exact pinout, memory, and peripheral counts vary; choose based on package, flash/RAM, and required peripherals.