STM32F207IFH6

STM32F207IFH6 is an STM32 microcontroller from STMicroelectronics’ F2 family. It uses an ARM Cortex‑M3 core capable of up to about 120 MHz, offering higher performance than the F1 series with enhanced DSP and math support.
Key points
- Core/Speed: ARM Cortex‑M3 at up to ~120 MHz.
- Peripherals: USB OTG FS, Ethernet MAC, LCD‑TFT controller, multiple SPI/I2C/UARTs, ADCs/DACs, timers, DMA, crypto accelerators, and memory‑mapped external interfaces (FSMC/SDIO).
- Memory: Flash and RAM sizes vary by device variant; F2 parts typically provide substantial flash (up to around 1 MB) and hundreds of KB of RAM.
- Package/Temp: The IFH6 suffix denotes a specific package type and industrial/temperature grade; check the exact datasheet for pin count and package details.
- Applications: Industrial automation, USB/Web devices, motor control, human‑machine interfaces, and graphics/display tasks.
Note: For exact specs (memory sizes, package pins, electrical characteristics), consult the STM32F207 datasheet and reference manual corresponding to the IFH6 variant.

Key features of the STM32F207IFH6 (STM32F2 family):
- Core: 32‑bit ARM Cortex‑M3 CPU, up to 120 MHz
- Memory: up to 1 MB Flash; up to 128 KB SRAM
- USB: USB OTG Full‑Speed with on‑chip PHY
- Ethernet: 10/100 Mbps Ethernet MAC with DMA (IEEE 802.3)
- CAN: CAN 2.0B controller
- Connectivity: multiple USART/UARTs, I2C, SPI (and I2S)
- Analog: 12‑bit ADC with up to ~16 channels
- Timers: advanced‑control timers (TIM1/TIM8) plus several general‑purpose timers
- DMA: multi‑channel DMA controller for high‑speed data transfers
- Debug/Boot: SWD/JTAG debug; boot from Flash
- Power/low‑power: multiple power modes (Run/Sleep/Stop/Standby)
- Operating range: industrial temperature support
- Packaging: available in common STM32F2 packages (e.g., LQFP variants)
Notes: exact RAM/Flash sizes and peripheral counts vary by exact subfamily and package. Refer to the datasheet for the precise configuration of the IFH6 device.

LQFP package, 144-pin (ST 14x14 mm LQFP).

- Pin count: 144 pins (LQFP-144, package code IFH6)
- Function: 32‑bit ARM Cortex‑M3 microcontroller (STM32F2 family) with on‑chip flash and RAM and a rich set of peripherals (e.g., USB OTG, CAN, Ethernet MAC on applicable variants) for embedded control applications.

Manufacturer: STMicroelectronics (ST).
STMicroelectronics is a multinational semiconductor company (an integrated device manufacturer) headquartered in Geneva, Switzerland, with French-Italian origins. It designs and manufactures a wide range of semiconductor products, including microcontrollers (like the STM32 family), sensors, power devices, and more.

Typical application areas for STM32F207IFH6:
- Industrial control and automation
- Motor control (BLDC/stepper) and drives
- Digital power management and battery-powered systems
- Data acquisition, instrumentation and sensor interfaces
- Embedded networking and communications (USB OTG FS, Ethernet, CAN)
- Consumer electronics and human–machine interfaces
- Building automation and smart devices
- Automotive instrumentation and dashboards