圖片僅供參考

SPX29302T5-L

Name: SPX29302T5-L
Rating: 4.7 (12 reviews)

IC REG LINEAR POS ADJ 3A TO263-5

製造商
製造商。部分 #SPX29302T5-L
包 TO-263-5
資料表
有現貨的5318

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Package	Tube
ProductStatus	Obsolete
OutputConfiguration	Positive
OutputType	Adjustable
NumberofRegulators	1
Voltage-Input(Max)	16V
Voltage-Output(Min/Fixed)	1.25V
Voltage-Output(Max)	16V
VoltageDropout(Max)	0.8V @ 3A
Current-Output	3A
ControlFeatures	Enable
ProtectionFeatures	Over Current, Reverse Polarity, Transient Voltage
OperatingTemperature	-40°C ~ 125°C
MountingType	Surface Mount
Package/Case	TO-263-6, D²Pak (5 Leads + Tab), TO-263BA

概述

Description

SPX29302T5-L is a fixed-output, low-dropout (LDO) linear regulator from the SPX2930 family. It comes in a compact SOT-23-5 (T5) package with an enable pin and protection features (current limit, thermal shutdown). It provides a stable output for microcontrollers, sensors, and other logic in portable/low-power designs, from a higher input voltage. The exact output voltage (e.g., 2.5–3.3–5.0 V variants) and maximum load current depend on the specific variant; check the datasheet for precise electrical specs, recommended input/output capacitor values, dropout, quiescent current, and tolerances. In short, it’s a small, easy-to-use regulator suitable for compact power rails in embedded systems.

Features

SPX29302T5-L is a fixed 3.0 V, low-dropout regulator in a 5-pin SOT-23 (T5) lead-free package. Key features:
- Fixed output: 3.0 V
- Output current up to about 300 mA
- Low dropout with fast transient response
- Very low quiescent current
- Enable pin for powered-down operation
- Protective features: current-limit/short-circuit protection and thermal shutdown
- Suitable for battery-powered/protable applications
- RoHS-compliant, lead-free package (T5)

Package

I can’t access external datasheets from here. Please paste the SPX29302T5-L datasheet or allow me to look it up online, and I’ll tell you the exact package type.

Pinout

SPX29302T5-L is a 5‑pin device (SOT‑23‑5 style). It is a low‑dropout (LDO) linear voltage regulator — a positive DC regulator that provides a stable output voltage from a higher input; typical pins are VIN, VOUT, GND, EN (enable) and ADJ/BYPASS or NC depending on fixed/adjustable version. Check the manufacturer datasheet for the exact pinout and electrical ratings.

Manufacturer

Manufacturer: Sipex (SPX family) — originally Sipex Corporation. Sipex is/was a semiconductor company specializing in analog and power‑management ICs (LDO regulators, interface and mixed‑signal products); its product lines were later rolled into Exar and then MaxLinear through acquisitions.

Application

SPX29302T5-L is a low-dropout regulator (LDO). Key applications:
- Power regulation for microcontrollers, DSPs, FPGAs, and memory in portable/battery-powered devices
- IoT sensors, wearables, and other embedded/compact electronics
- Consumer electronics (peripherals, set-top boxes, routers)
- Automotive and industrial electronics needing a compact, low-noise supply
- GPS/WiFi modules, LED driver circuits requiring a stable, efficient regulator

Equivalent

I don’t have a verified match for "SPX29302T5-L." Please provide the manufacturer or the chip’s datasheet (or its key specs: function, output voltage, max current, package). With that I can list direct equivalents (same electrical specs and pinout) concisely.