圖片僅供參考

SPC5744BK1CMH2R

Name: SPC5744BK1CMH2R
Rating: 4.7 (12 reviews)

IC MCU 32B 1.5MB FLASH 100MAPBGA

製造商
製造商。部分 #SPC5744BK1CMH2R
包 100-LFBGA
資料表
有現貨的4517

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Supplier	NXP USA Inc.
Package	Tape & Reel (TR)
Series	MPC57xx
ProductStatus	Active
CoreProcessor	e200z4
CoreSize	32-Bit Single-Core
Speed	120MHz
Connectivity	CANbus, Ethernet, FlexRay, I²C, LINbus, SPI
Peripherals	DMA, I²S, POR, WDT
ProgramMemorySize	1.5MB (1.5M x 8)
ProgramMemoryType	FLASH
EEPROMSize	64K x 8
RAMSize	192K x 8
Voltage-Supply(Vcc/Vdd)	3.15V ~ 5.5V
DataConverters	A/D 36x10b, 16x12b
OscillatorType	Internal
OperatingTemperature	-40°C ~ 85°C (TA)
MountingType	Surface Mount
Package/Case	100-LFBGA

概述

Description

The SPC5744BK1CMH2R is an automotive-grade 32‑bit MCU from NXP’s SPC5 family (Freescale lineage). It uses an ARM Cortex‑M4 core with FPU/DSP for real‑time control and motor‑control workloads. It integrates on‑chip flash and RAM (sizes vary by variant) and a broad peripheral set suitable for automotive and industrial applications.
Key features (typical): multiple CAN/CAN FD interfaces, LIN, SPI, I2C, UART, PWM/timers for motor control, ADCs (and possibly DAC), DMA/eDMA, CRC, and safety features for automotive use. The BK1CMH2R suffix designates a specific package and temperature grade; exact pinout, memory, and clock options are defined by the datasheet.
Applications: powertrain and body electronics, motor control, and other real‑time automotive tasks. Development is supported by NXP SPC5 toolchains (S32 Design Studio for ARM) and AUTOSAR options. For precise specs and pinout, consult the SPC5744BK1CMH2R datasheet and product selector.

Features

SPC5744BK1CMH2R is an automotive-grade 32‑bit MCU from the SPC5 family. Key features (variant dependent; verify datasheet for exact numbers):
- 32‑bit processing core with high performance
- On‑chip flash and RAM (sizes vary by device)
- Automotive communications: CAN (including CAN FD), LIN, FlexCAN, Ethernet, USB
- Rich peripherals: PWM/timers (motor control), ADCs, DACs, SPI, I2C, SCI/UART, I2S
- DMA/EDMA, memory protection unit; ECC on RAM/Flash
- Safety/reliability: CRC, watchdogs, fault-detection features
- Power management: multiple low‑power modes and automotive voltage range support
- Packaging: CMH2R option
Typical use: motor control, vehicle gateway and body electronics, powertrain/other automotive applications. For exact core speed, memory sizes, and peripheral counts, consult the official datasheet for SPC5744BK1CMH2R.

Package

LQFP package, 144-pin (CMH variant).

Pinout

Pin count: 176 pins (LQFP176 package).
Function: NXP SPC5744BK1CMH2R is a 32-bit automotive microcontroller in the SPC5 family (ARM Cortex-M4F) with on-chip flash and RAM and built-in peripherals (CAN/LIN, SPI, I2C, UART, etc.) for automotive control applications.

Manufacturer

STMicroelectronics (ST) — a multinational semiconductor company. They design, manufacture, and market a broad range of ICs and electronic components, including automotive and industrial microcontrollers, sensors, power devices, and MEMS.

Application

SPC5744BK1CMH2R is a high‑performance automotive MCU from NXP/Freescale. It targets powertrain and body/chassis ECUs and industrial motor control. Common applications: engine and transmission control units, hybrid/electric motor drives, ABS/ESP and stability control, body electronics and gateways, battery management, and instrument/sensor interfaces. It supports CAN/CAN FD, LIN, FlexRay, Ethernet and real‑time, safety‑critical control for automotive and industrial automation.