圖片僅供參考

SN74AUC1G07YZPR

Name: SN74AUC1G07YZPR
Rating: 4.7 (12 reviews)

IC BUFFER NON-INVERT 2.7V 5DSBGA

製造商
製造商。部分 #SN74AUC1G07YZPR
包 5-XFBGA, DSBGA
資料表
有現貨的5455

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Supplier	Texas Instruments,Rochester Electronics, LLC
Package	Tape & Reel (TR),Cut Tape (CT),Bulk
Series	74AUC
ProductStatus	Active
LogicType	Buffer, Non-Inverting
NumberofElements	1
NumberofBitsperElement	1
OutputType	Open Drain
Current-OutputHighLow	-, 9mA
Voltage-Supply	0.8V ~ 2.7V
OperatingTemperature	-40°C ~ 85°C (TA)
MountingType	Surface Mount
Package/Case	5-XFBGA, DSBGA

概述

Description

SN74AUC1G07YZPR is a TI logic device: a single non-inverting buffer/driver with an open-drain output. It is part of the SN74AUC1G0x family (Advanced Ultra-Low-Power CMOS). Key points:
- One buffer, open-drain output: can sink current to ground but cannot source; a pull-up resistor defines the high state.
- Input/output: CMOS-compatible input thresholds; output follows the input when low (output floats/high via pull-up) and pulls low when the input is high.
- Supply: typically 1.65 V to 3.6 V; suitable for low-power, 1× Vcc logic levels.
- Applications: wired-OR/bus sharing, level shifting, bus interfacing, or any scenario needing a single open-drain buffer.
- Packaging: YZPR denotes a specific TI packaging/tape-and-reel option; check the datasheet for exact package details.
For precise electrical specs (voltage ranges, current limits, propagation delay) and recommended pull-up values, consult the SN74AUC1G07 datasheet.

Features

Here are the typical features of SN74AUC1G07YZPR:
- Single noninverting buffer gate
- Very low static/dynamic power
- Wide supply range: 1.65 V to 3.6 V
- Ioff with partial-power-down support (no back-powering when VCC=0)
- TTL/CMOS input-compatible
- ESD protection on I/O
- Small 5-pin package (SC‑70/ SOT‑353) with YZPR tape-and-reel options
- Suitable for buffering/level shifting between voltage domains
- Industrial temperature variants available (extended temp range)

Package

Package type: a small 6‑pin SC‑70 package (SOT‑363 family), Pb‑free.

Pinout

- Pin count: 6 pins (SC-70/SOT-23-6 package)
- Function: Single non-inverting buffer/driver with a tri-state (3-state) output. It has input (A), output (Y), and an output-enable (OE) to control the tri-state, plus Vcc and GND.

Manufacturer

Texas Instruments (TI). TI is an American multinational technology company that designs and manufactures semiconductors and integrated circuits, including analog, mixed-signal, and embedded processing devices.

Application

Applications of SN74AUC1G07YZPR:
- Level shifting between voltage domains (e.g., 1.8/2.5 V to 3.3 V)
- Buffering for clocks, data, and control signals to improve drive and integrity
- Tri-state/bus buffering for multiplexing and isolation of digital loads
- Driving CMOS/TTL inputs with low skew; compact, low-power signal distribution in MCU/FPGA/memory interfaces
Suitable for portable, automotive, and industrial electronics requiring small footprint and clean signal buffering.

Equivalent

Direct equivalents (same function, similar specs) include:
- Nexperia 74AUC1G07
- NXP 74AUC1G07
- ON Semiconductor 74LVC1G07 (voltage-compatible alternative; check Vcc/thresholds)