圖片僅供參考

SKY66296-11

Name: SKY66296-11
Rating: 4.7 (12 reviews)

IC AMP LTE 700MHZ-800MHZ 16LGA

製造商
製造商。部分 #SKY66296-11
包 16-LFLGA
資料表
有現貨的7750

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Supplier	Skyworks Solutions Inc.
Package	Tape & Reel (TR),Cut Tape (CT)
ProductStatus	Active
Frequency	700MHz ~ 800MHz
Gain	35dB
RFType	LTE
Voltage-Supply	5V
Current-Supply	70mA
TestFrequency	800MHz
MountingType	Surface Mount
Package/Case	16-LFLGA

概述

Description

SKY66296-11 is a Skyworks RF front-end IC (part of the SKY66296 family) used to route RF signals in wireless transceivers. It functions as a switch module that selects between RF paths (e.g., TX/RX or antenna routes) within a compact package, enabling multi-band front-ends. Typical features include broadband 50-ohm RF paths with low insertion loss, high isolation, and integrated biasing with ESD protection. It targets mobile and IoT applications such as cellular/LTE, Wi‑Fi, and other RF front-ends that require reliable signal routing. The device is designed for integration into RF modules with minimal external components, with documented pinout, bias ranges, and PCB guidelines in the datasheet. Exact specifications (frequency range, loss, isolation, bias current, supply voltage, and package) vary by variant and region; consult the SKY66296-11 datasheet for precise figures. If you share your target band or application, I can summarize the relevant specs.

Features

Here are the typical features of Skyworks SKY66296-11 (2.4 GHz Front-End Module). Exact specs depend on revision, so check the datasheet for numbers.
- 2.4 GHz RF front-end module for ISM/Wi‑Fi/Bluetooth applications
- Integrated power amplifier (PA) and low-noise amplifier (LNA)
- Integrated TX/RX switch with high isolation
- On-chip matching network and harmonic filtering for 2.4 GHz
- Supports Wi‑Fi (802.11 b/g/n) and Bluetooth/BLE coexistence
- Bias/enable control pins for TX power and RX enable
- Compact packaging (small QFN/LGA form factor, low profile)
- Wide supply range with efficient biasing (typical mobile/IoT operation)
- RoHS compliant with standard ESD/over-voltage protection (as applicable)
Notes:
- Exact gain, noise figure, output power, and supply requirements vary by revision; refer to the official datasheet (revision -11) for precise figures.

Package

I don’t have the SKY66296-11 datasheet available to verify the exact mechanical package. Please upload the datasheet or allow me to look it up online and I’ll return the precise package type (e.g., QFN/MLF dimensions and pin count).

Manufacturer

Manufacturer: Skyworks Solutions, Inc.
Type of company: A U.S.-based, publicly traded semiconductor company that designs and manufactures analog and mixed-signal RF components and front-end modules for mobile, wireless, IoT and automotive applications.

Application

Applications of SKY66296-11:
- Mobile devices: smartphones, tablets, mobile hotspots using LTE/5G sub-6 GHz
- Wireless infrastructure: small cells, picocells, repeaters, CPE RF front-ends
- IoT/M2M devices: industrial sensors, asset trackers needing compact RF front-ends
- Automotive connectivity: telematics, in‑vehicle internet
- Any RF system requiring integrated front-end modules for sub-6 GHz cellular bands

Equivalent

There is no guaranteed drop‑in equivalent to the Skyworks SKY66296-11. Comparable-function alternatives come from Qorvo (QPA/TQP PA families), Murata (FEM/PA modules), Broadcom/Avago RF front‑end modules and RFMD/Qorvo discrete PAs. Exact substitution requires matching frequency band, gain, output power, impedance and pinout—contact Skyworks for cross‑references or provide your frequency/application for targeted alternatives.