PN7160A1HN/C100E

圖片僅供參考

PN7160A1HN/C100E

IC NFC CONTROLLER I2C HVQFN40

100%原創; 新

24小時準備發貨

365天保修

RFQ&; 獲得更多折扣

規格

Supplier NXP USA Inc.
Package Tray
ProductStatus Active
Type RFID Reader
Frequency 13.56MHz
Standards FeliCa, ISO 14443, ISO 15693, MIFARE, NFC
Interface I²C
Voltage-Supply 1.65V ~ 1.95V, 3V ~ 3.6V
OperatingTemperature -25°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 40-VFQFN Exposed Pad

概述

Description

PN7160A1HN/C100E is NXP’s PN7160 NFC controller IC. It provides an integrated RF front-end and protocol stack to enable NFC reader/writer, card emulation, and peer-to-peer modes for multiple standards.
Key points:
- Protocols: NFC Forum Type A/B, FeliCa, and ISO/IEC 15693 (supporting cards/tags and mobile devices).
- Modes: Reader/Writer, Card Emulation (HCE), and Peer-to-Peer.
- Host interface: I2C or SPI to a microcontroller; handles RF field, anti-collision, timing, etc.
- Security: hardware cryptography (AES/DES), RNG, and secure-data handling for secure elements and HCE.
- Packaging/variant: A1HN denotes the package variant; C100E specifies a temperature/revision grade.
Typical applications:
- Embedded NFC readers in POS terminals and access control
- NFC-enabled devices and tags
- Smart posters and tag/card emulation use cases
Quick integration:
- Connect power, I2C/SPI, IRQ, and RST to the host MCU
- Add RF matching network
- Load firmware and run an NFC stack on the host or via PN7160’s firmware
Note: verify exact electricals and packaging in the latest datasheet.

Features

Here are the typical features of PN7160A1HN/C100E (NXP NFC Front-End):
- 13.56 MHz NFC front-end transceiver
- Supports ISO/IEC 14443 Type A/B and ISO/IEC 15693
- NFC Forum-compliant Tag emulation, Read/Write, and Peer-to-Peer (NFCIP-1)
- Card/tag compatibility: MIFARE DESFire (EV1/EV2), DESFire, Classic, and FeliCa (where firmware supports)
- Host interface options: SPI and I²C (configurable, MCU integration)
- RF field generation, automatic impedance matching, field detection and communication control
- Low-power modes with wake-on-field capability
- Industrial-grade temperature range (typical for A1/HN variants)
- Small-footprint package (A1HN) suitable for compact designs
Note: exact supported card types and crypto features can depend on firmware and revision; verify against the specific datasheet for PN7160A1HN/C100E.

Package

The "/C100E" suffix denotes tape-and-reel shipping (carrier reel, typically 1,000 pcs). For the IC package type (exact LGA/WLCSP/QFN variant and dimensions), please refer to the PN7160 datasheet or NXP ordering information.

Pinout

Pin count: 48 pins (HVQFN package).
Function: PN7160A1HN/C100E is an NFC front-end/controller IC (RF transceiver plus protocol engine) for contactless smart cards (ISO/IEC 14443 Type A/B, ISO/IEC 15693, FeliCa). It interfaces to a host MCU via SPI (and typically I2C), providing the 13.56 MHz RF front end and protocol processing for NFC/RFID applications.

Manufacturer

Manufacturer: NXP Semiconductors N.V. (commonly “NXP”).
What kind of company: NXP is a global Dutch semiconductor manufacturer that designs and supplies mixed-signal and digital integrated circuits and secure connectivity solutions (including NFC/RFID controllers, microcontrollers, processors and automotive, industrial and IoT semiconductor products).

Application

PN7160A1HN/C100E is an NFC controller front-end for embedded systems. Applications include:
- Reading/writing contactless cards and tags (ISO 14443/15693)
- Payment, loyalty and access-control terminals
- Transit ticketing and e-ID systems
- Secure identity/authentication in embedded devices
- NFC data exchange in IoT, wearables and smart posters

Equivalent

Direct equivalents to the NXP PN7160A1HN/C100E include NXP PN7150 and PN5180 (NFC controller/reader families), STMicroelectronics ST25R3916 / ST25R3911B (high‑performance NFC readers), Sony RC‑S series modules, and Broadcom/CSR NFC controller families. Select by required interface (I2C/SPI), HCI/firmware and secure‑element support.

船舶

運輸管道我們

通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。


運費參攷(DHL/FedEx):

動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。

聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。

掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。

支付

Payment Methods

付款條件為100%預付。

現時,我們只接受以下付款方式:

1. 貝寶

2. 信用卡/借記卡

3. 電匯