圖片僅供參考

PIC18F24J10-I/SS

Name: PIC18F24J10-I/SS
Rating: 4.7 (12 reviews)

IC MCU 8BIT 16KB FLASH 28SSOP

製造商
製造商。部分 #PIC18F24J10-I/SS
包 SSOP-28
資料表 PIC18F24J10-I/SS DataSheet
有現貨的2833

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Package	Tube
Series	PIC® 18J
ProductStatus	Active
CoreProcessor	PIC
CoreSize	8-Bit
Speed	40MHz
Connectivity	I²C, SPI, UART/USART
Peripherals	Brown-out Detect/Reset, POR, PWM, WDT
NumberofI/O	21
ProgramMemorySize	16KB (8K x 16)
ProgramMemoryType	FLASH
RAMSize	1K x 8
Voltage-Supply(Vcc/Vdd)	2.7V ~ 3.6V
DataConverters	A/D 10x10b
OscillatorType	Internal
OperatingTemperature	-40°C ~ 85°C (TA)
MountingType	Surface Mount
Package/Case	28-SSOP (0.209, 5.30mm Width)

概述

Description

The PIC18F24J10-I/SS is a 16-bit microcontroller from Microchip's PIC18 family, designed for high-performance applications. It features a 28-pin package, operating at a maximum clock speed of 64 MHz. With 32 KB of Flash memory for code storage and 1.5 KB of SRAM, it offers ample resources for embedded applications.
Key features include a rich set of I/O ports (up to 23), integrated ADC (Analog-to-Digital Converter) with 10-bit resolution, multiple timers, and a variety of communication interfaces such as I2C, SPI, and UART. The microcontroller supports advanced peripherals, including PWM (Pulse Width Modulation) for motor control and comparators for signal processing.
It also provides enhanced functionality with its deep sleep mode for power-saving applications and is compatible with the MPLAB X IDE for easy development and programming. Ideal for automation, sensor applications, and consumer electronics, the PIC18F24J10-I/SS combines flexibility, performance, and efficiency in a compact design.

Features

The PIC18F24J10-I/SS is a microcontroller from Microchip's PIC18 series, featuring:
- Architecture: 8-bit with a 16-bit instruction set.
- Flash Memory: 32 KB for program storage.
- RAM: 2 KB of data RAM.
- EEPROM: 256 bytes for non-volatile data storage.
- I/O Ports: 16 digital I/O pins.
- Timers: 3 timers (Timer0, Timer1, Timer2) for various timing applications.
- ADC: 10-bit Analog-to-Digital Converter with up to 13 channels.
- Communication Interfaces: Supports I2C, SPI, and USART for peripheral connectivity.
- PWM: Up to 2 PWM outputs.
- Operating Voltage: 2.0V to 5.5V with a temperature range of -40°C to +125°C.
- Oscillator: Internal oscillator with frequencies up to 32 MHz.
- Low Power Modes: Multiple power-saving modes for energy efficiency.
- Development Support: Compatible with MPLAB X IDE and XC8 compiler.
This microcontroller is well-suited for various embedded applications, including industrial, automotive, and consumer electronics.

Package

The PIC18F24J10-I/SS is packaged in a 28-pin SSOP (Shrink Small Outline Package) type.

Pinout

The PIC18F24J10-I/SS microcontroller features a total of 28 pins. Its primary functions include:
1. General Purpose I/O (GPIO): 16 pins (RB0 to RB7, RC0 to RC6) can be configured as input or output.
2. Analog Input: Up to 10 pins can be used for analog-to-digital conversion (ADCs).
3. PWM Output: Supports Pulse Width Modulation on specific pins (RC0, RC1).
4. Communication Interfaces:
- UART: For serial communication (TX and RX pins).
- SPI: Serial Peripheral Interface (MOSI, MISO, SCK).
- I2C: Two-wire interface for communication with other devices (SDA, SCL).
5. Timers: Several pins support timer functions for various applications.
6. External Interrupts: Certain pins can be configured for external interrupt sources.
The microcontroller operates at a maximum clock speed of 32 MHz and is suitable for a wide range of embedded applications.

Manufacturer

The manufacturer of the PIC18F24J10-I/SS is Microchip Technology Inc. Microchip is a leading American semiconductor company that specializes in embedded control solutions. Founded in 1989, it designs and manufactures a wide range of microcontrollers, memory products, and analog and interface components. Microchip is particularly known for its PIC microcontroller series, which is widely used in various applications, including automotive, industrial, consumer electronics, and IoT devices. The company focuses on providing high-performance, low-power solutions for embedded systems, and it emphasizes innovation and customer support in its product development.

Application

The PIC18F24J10-I/SS microcontroller is used in various applications, including industrial automation, motor control, embedded systems, consumer electronics, medical devices, data logging, and communication systems. Its features such as multiple I/O ports, ADC, and EEPROM make it suitable for tasks requiring reliable control and data processing in real-time environments.

Equivalent

Equivalent products to the PIC18F24J10-I/SS include the PIC18F24J11, PIC18F25J10, and PIC18F25J11. These microcontrollers share similar architectures and features but may differ in memory size, pin count, or specific functionalities. Always check the manufacturer's datasheets for detailed specifications and compatibility.