圖片僅供參考
PCA9511ADP,118
PCA9511ADP - Hot Swappable I
- 製造商
- 製造商。 部分 #PCA9511ADP,118
- 包
- 資料表 PCA9511ADP,118 DataSheet
- 有現貨的3633
100%原創; 新
24小時準備發貨
365天保修
RFQ&; 獲得更多折扣
規格
| Part Status | Active |
| Type | Buffer, Accelerator |
| Applications | I2C - Hotswap |
| Input | 2-Wire Bus |
| Output | 2-Wire Bus |
| Data Rate (Max) | 400kHz |
| Number of Channels | 1 |
| Delay Time | 70ns |
| Capacitance - Input | 5 pF |
| Voltage - Supply | 2.7V ~ 5.5V |
| Current - Supply | 3.5mA |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Package | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) |
| Supplier Device Package | 8-TSSOP |
| Packaging | Bulk |
概述
Description
The PCA9511ADP,118 is a bidirectional I2C-bus and SMBus buffer designed to extend the bus capacitance and improve signal integrity in systems with multiple I2C devices. It enables communication between devices that operate at different voltage levels or that are physically distant from one another, effectively isolating the bus segments.
The device supports a wide range of input and output voltages, making it versatile for various applications. The PCA9511ADP features low propagation delay and minimal added capacitance, ensuring that high-speed I2C communication is maintained. It is often employed in consumer electronics, industrial equipment, and other embedded systems where multiple I2C devices are present.
Key features include a dual-channel configuration, open-drain outputs, and the ability to support standard, fast, and fast-mode-plus I2C communications. The PCA9511ADP,118 is available in a compact package, making it suitable for space-constrained designs. Overall, it enhances the reliability and performance of I2C communication in complex applications.
The device supports a wide range of input and output voltages, making it versatile for various applications. The PCA9511ADP features low propagation delay and minimal added capacitance, ensuring that high-speed I2C communication is maintained. It is often employed in consumer electronics, industrial equipment, and other embedded systems where multiple I2C devices are present.
Key features include a dual-channel configuration, open-drain outputs, and the ability to support standard, fast, and fast-mode-plus I2C communications. The PCA9511ADP,118 is available in a compact package, making it suitable for space-constrained designs. Overall, it enhances the reliability and performance of I2C communication in complex applications.
Features
The PCA9511ADP,118 is a dual bidirectional I²C-bus and SMBus voltage-level translator. Key features include:
1. Dual Channel: Supports two separate I²C channels for interfacing between devices operating at different voltage levels.
2. Voltage Range: Compatible with input and output voltage levels from 1.2V to 5.5V.
3. Bidirectional Communication: Allows data to flow in both directions without the need for direction control.
4. Fast Mode Support: Supports standard I²C Fast mode (up to 400 kHz).
5. Open-Drain Outputs: Compatible with open-drain configurations for I²C signaling.
6. No External Components Required: Integrated design minimizes additional component needs.
7. Low Power Consumption: Designed for efficient power usage in various applications.
8. Package: Available in a small TSSOP-8 package, facilitating compact designs.
The PCA9511ADP,118 is ideal for connecting microcontrollers, sensors, and other devices with differing voltage levels, enhancing system interoperability in various electronic applications.
1. Dual Channel: Supports two separate I²C channels for interfacing between devices operating at different voltage levels.
2. Voltage Range: Compatible with input and output voltage levels from 1.2V to 5.5V.
3. Bidirectional Communication: Allows data to flow in both directions without the need for direction control.
4. Fast Mode Support: Supports standard I²C Fast mode (up to 400 kHz).
5. Open-Drain Outputs: Compatible with open-drain configurations for I²C signaling.
6. No External Components Required: Integrated design minimizes additional component needs.
7. Low Power Consumption: Designed for efficient power usage in various applications.
8. Package: Available in a small TSSOP-8 package, facilitating compact designs.
The PCA9511ADP,118 is ideal for connecting microcontrollers, sensors, and other devices with differing voltage levels, enhancing system interoperability in various electronic applications.
Package
The PCA9511ADP,118 is available in a TSSOP-8 (Thin Shrink Small Outline Package) type.
Pinout
The PCA9511ADP,118 is a dual bidirectional I2C bus buffer. It features a pin count of 16 pins. The primary function of this device is to allow multiple I2C bus segments to communicate without interference, enabling longer bus lengths and higher capacitance loads.
Key pins include:
- VDD (Power supply)
- GND (Ground)
- SDA (Serial Data Line)
- SCL (Serial Clock Line)
- A1, A2 (Address selection for bus segments)
- B1, B2 (Buffered data lines for output)
- EN (Enable pin for activating the buffer)
The PCA9511ADP,118 supports standard (100 kHz), fast (400 kHz), and fast-mode plus (1 MHz) I2C communication, making it suitable for various applications where I2C bus isolation or extension is needed.
Key pins include:
- VDD (Power supply)
- GND (Ground)
- SDA (Serial Data Line)
- SCL (Serial Clock Line)
- A1, A2 (Address selection for bus segments)
- B1, B2 (Buffered data lines for output)
- EN (Enable pin for activating the buffer)
The PCA9511ADP,118 supports standard (100 kHz), fast (400 kHz), and fast-mode plus (1 MHz) I2C communication, making it suitable for various applications where I2C bus isolation or extension is needed.
Manufacturer
The PCA9511ADP,118 is manufactured by NXP Semiconductors. NXP is a global semiconductor company that specializes in designing and manufacturing a wide range of electronic components and systems, including microcontrollers, processors, and communication interfaces. Founded in 2006 as a spin-off from Philips, NXP focuses on automotive, industrial, and Internet of Things (IoT) applications. The PCA9511 is a dual bidirectional I2C bus and SMBus buffer that enhances communication between devices and is commonly used in various electronic applications. NXP is known for its innovation and extensive portfolio in the semiconductor industry, catering to diverse markets.
Application
The PCA9511ADP,118 is a dual bidirectional I2C bus buffer and level shifter. It is primarily used in applications requiring signal integrity and level translation between different I2C voltage domains, such as in embedded systems, sensor interfaces, and microcontroller communications. Common application areas include automotive electronics, industrial automation, consumer electronics, and communication devices, where reliable data transmission in mixed-voltage environments is essential.
Equivalent
The PCA9511ADP,118 is a dual bidirectional I2C bus buffer. Equivalent products include the TCA9517, TCA9518, and P82B715. Ensure to check specifications like voltage levels, speed, and package types for compatibility with your application.
船舶
運輸管道我們
通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。
運費參攷(DHL/FedEx):
動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。
聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。
掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。
支付
Payment Methods
付款條件為100%預付。
現時,我們只接受以下付款方式:
1. 貝寶
2. 信用卡/借記卡
3. 電匯
類似的
-
MX25R8035FM1IL0
Macronix
-
MX25L3233FZBI-08Q
Macronix
-
MX25L3233FM1I-08Q
Macronix
-
MX25V1635FZNI
Macronix
-
MX25V5126FM1I
Macronix
-
MX25R6435FBDIL0
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX25U51279GXDR00
Macronix
-
MX25R1635FZUIH0
Macronix
-
MX25L25735FMI-10G
Macronix
-
MX25U51245GZ4I00
Macronix
-
MX25R4035FM1IL0
Macronix