圖片僅供參考
PAM2312AABADJ
IC REG BUCK ADJ 1A TSOT25
- 製造商
- 製造商。 部分 #PAM2312AABADJ
- 包
- 資料表 PAM2312AABADJ DataSheet
- 有現貨的5896
100%原創; 新
24小時準備發貨
365天保修
RFQ&; 獲得更多折扣
規格
| Part Status | Active |
| Base Product Number | PAM2312 |
| Function | Step-Down |
| Output Configuration | Positive |
| Topology | Buck |
| Output Type | Adjustable |
| Number of Outputs | 1 |
| Voltage - Input (Min) | 2.5V |
| Voltage - Input (Max) | 5.5V |
| Voltage - Output (Min/Fixed) | 0.6V |
| Voltage - Output (Max) | 5.5V |
| Current - Output | 1A |
| Frequency - Switching | 1.5MHz |
| Synchronous Rectifier | Yes |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package | SOT-23-5 Thin, TSOT-23-5 |
| Supplier Device Package | TSOT-25 |
| Packaging | Cut Tape (CT), Tape & Reel (TR) |
概述
Description
PAM2312AABADJ likely refers to a specific electronic component, such as a programmable attenuator or a similar device, used in radio frequency (RF) and microwave applications. These components are typically employed to adjust signal levels dynamically while maintaining impedance matching and minimal signal distortion. "PAM" often stands for Programmable Attenuator Module, and the numbers and letters following it (2312AABADJ) usually represent the model number and specific configuration details provided by the manufacturer.
Such devices are essential in telecommunications, radar systems, and test equipment, where precise control over signal amplitude is required. They can be controlled via digital or analog inputs and are valued for their ability to accommodate a wide range of frequencies, power levels, and environmental conditions.
For specific information about the PAM2312AABADJ, including its technical specifications, operational guidelines, and applications, it is best to consult the datasheet or technical documentation provided by the manufacturer. This will offer detailed insights into its capabilities, electrical characteristics, and integration instructions.
Such devices are essential in telecommunications, radar systems, and test equipment, where precise control over signal amplitude is required. They can be controlled via digital or analog inputs and are valued for their ability to accommodate a wide range of frequencies, power levels, and environmental conditions.
For specific information about the PAM2312AABADJ, including its technical specifications, operational guidelines, and applications, it is best to consult the datasheet or technical documentation provided by the manufacturer. This will offer detailed insights into its capabilities, electrical characteristics, and integration instructions.
Features
The PAM2312AABADJ is a high-efficiency, step-down DC-DC converter designed by Diodes Incorporated. Key features of this component include:
1. Wide Input Voltage Range: It supports an input range of 2.5V to 5.5V, making it suitable for various applications powered by single-cell lithium-ion batteries or USB sources.
2. Adjustable Output Voltage: The output voltage is adjustable, offering flexibility for different application needs.
3. High Efficiency: The converter boasts high efficiency, up to 95%, which helps in reducing power loss and heat generation.
4. Low Quiescent Current: With a low quiescent current, it is ideal for battery-powered applications where power conservation is crucial.
5. Integrated MOSFETs: Features internal MOSFETs for reduced component count and simplified design.
6. Fixed Switching Frequency: It operates at a fixed switching frequency, optimizing both performance and component selection.
7. Protection Features: Includes overcurrent protection, thermal shutdown, and undervoltage lockout to enhance reliability and safety.
8. Compact Package: Available in a compact package, facilitating easy integration into space-constrained designs.
These features make the PAM2312AABADJ suitable for consumer electronics, portable devices, and other battery-operated applications.
1. Wide Input Voltage Range: It supports an input range of 2.5V to 5.5V, making it suitable for various applications powered by single-cell lithium-ion batteries or USB sources.
2. Adjustable Output Voltage: The output voltage is adjustable, offering flexibility for different application needs.
3. High Efficiency: The converter boasts high efficiency, up to 95%, which helps in reducing power loss and heat generation.
4. Low Quiescent Current: With a low quiescent current, it is ideal for battery-powered applications where power conservation is crucial.
5. Integrated MOSFETs: Features internal MOSFETs for reduced component count and simplified design.
6. Fixed Switching Frequency: It operates at a fixed switching frequency, optimizing both performance and component selection.
7. Protection Features: Includes overcurrent protection, thermal shutdown, and undervoltage lockout to enhance reliability and safety.
8. Compact Package: Available in a compact package, facilitating easy integration into space-constrained designs.
These features make the PAM2312AABADJ suitable for consumer electronics, portable devices, and other battery-operated applications.
Package
The PAM2312AABADJ comes in a SOT-23-5 package type.
Pinout
The PAM2312AABADJ is a step-down DC-DC converter. It typically comes in a 6-pin TSOT23 package. The pin functions are as follows:
1. EN: Enable input. The converter is enabled when this pin is high.
2. GND: Ground reference for the device.
3. SW: Switch output. This is the switching node connected to the inductor.
4. VIN: Input voltage supply pin.
5. FB: Feedback input. This pin is used to set the output voltage via an external resistor divider.
6. NC: No connection. It may not be present or used for mechanical support.
This configuration allows the PAM2312AABADJ to efficiently convert a higher input voltage to a lower output voltage using pulse-width modulation, making it suitable for various applications in power management.
1. EN: Enable input. The converter is enabled when this pin is high.
2. GND: Ground reference for the device.
3. SW: Switch output. This is the switching node connected to the inductor.
4. VIN: Input voltage supply pin.
5. FB: Feedback input. This pin is used to set the output voltage via an external resistor divider.
6. NC: No connection. It may not be present or used for mechanical support.
This configuration allows the PAM2312AABADJ to efficiently convert a higher input voltage to a lower output voltage using pulse-width modulation, making it suitable for various applications in power management.
Manufacturer
The PAM2312AABADJ is manufactured by Diodes Incorporated. Diodes Incorporated is a leading global manufacturer and supplier of high-quality application-specific standard products within the broad discrete, logic, analog, and mixed-signal semiconductor markets. The company serves diverse customers and end-use markets, including consumer electronics, computing, communications, industrial, and automotive industries.
Application
The PAM2312AABADJ is a DC-DC buck converter integrated circuit used mainly in power management applications. Its primary application areas include portable electronics, battery-powered devices, and embedded systems requiring efficient voltage regulation and power conversion. It is often utilized in smartphones, tablets, wearable devices, and other consumer electronics to provide stable power supply while maximizing battery life. Its compact size and high efficiency make it suitable for applications with space constraints and energy efficiency requirements.
Equivalent
The PAM2312AABADJ is a DC-DC buck converter. Equivalent products include:
1. TI TLV62568 - A synchronous step-down converter.
2. Microchip MCP16301 - A high-efficiency buck regulator.
3. ON Semiconductor NCP1529 - A synchronous buck converter.
4. STMicroelectronics L6920D - A step-down monolithic power switching regulator.
5. Diodes Incorporated AP63200 - A synchronous buck converter.
Keep in mind that compatibility depends on specific requirements like voltage, current ratings, and package type. Always check the datasheets for exact specifications.
1. TI TLV62568 - A synchronous step-down converter.
2. Microchip MCP16301 - A high-efficiency buck regulator.
3. ON Semiconductor NCP1529 - A synchronous buck converter.
4. STMicroelectronics L6920D - A step-down monolithic power switching regulator.
5. Diodes Incorporated AP63200 - A synchronous buck converter.
Keep in mind that compatibility depends on specific requirements like voltage, current ratings, and package type. Always check the datasheets for exact specifications.
船舶
運輸管道我們
通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。
運費參攷(DHL/FedEx):
動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。
聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。
掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。
支付
Payment Methods
付款條件為100%預付。
現時,我們只接受以下付款方式:
1. 貝寶
2. 信用卡/借記卡
3. 電匯
類似的
-
MX25L3233FZBI-08Q
Macronix
-
MX25V16066M1I02
Macronix
-
MX25V16066M2I02
Macronix
-
MX30LF2G28AD-TI
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX29GL512FHXFI-11..
Macronix
-
MX25L2006EM1I-12G
Macronix
-
MX29LV160DTTI-70G
Macronix
-
MX29F040CQI-70G
Macronix
-
MX29F040CTI-70G
Macronix
-
MX29F800CBTI-70G
Macronix
-
MX29LV640ETTI-70G
Macronix