圖片僅供參考

OP07DP

Name: OP07DP
Rating: 4.7 (12 reviews)

製造商
製造商。部分 #OP07DP
包
資料表
有現貨的2725

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Package	Tube
ProductStatus	Obsolete
AmplifierType	General Purpose
NumberofCircuits	1
SlewRate	0.3V/µs
GainBandwidthProduct	600 kHz
Current-InputBias	12 nA
Voltage-InputOffset	150 µV
Voltage-SupplySpan(Min)	6 V
Voltage-SupplySpan(Max)	36 V
OperatingTemperature	0°C ~ 70°C (TA)
MountingType	Through Hole
Package/Case	8-DIP (0.300, 7.62mm)

概述

Description

OP07DP is the dual version of the OP07 precision op-amp, housed in a DIP-8 package. It contains two identical, high-accuracy amplifiers designed for low offset, low drift, and low noise—ideal for precision instrumentation and sensor conditioning.
Key points:
- Very low input offset voltage (tens to hundreds of microvolts) and low offset drift with temperature.
- Low input bias current and high open-loop gain for accurate DC amplification.
- Moderate bandwidth and slew rate; not a high-speed, rail-to-rail device.
- Typically used with dual supplies (e.g., ±5 to ±15 V); output swing and common-mode range are limited near the rails.
Common applications:
- Precision DC amplification and instrumentation
- Active filters and integrators
- ADC front-end conditioning and sensor interfaces
Packages and pinout:
- Dual op-amp in DIP-8 (two amplifiers per package)
Note: Always consult the specific OP07DP datasheet for exact electrical characteristics, supply limits, and pin assignments for your variant.

Features

OP07DP features (dual precision op-amp in DIP-8 plastic package):
- Dual, high-precision op-amp for DC accuracy and signal conditioning
- Very low input-offset voltage with low drift
- Low input-bias current and low input-noise
- High open-loop gain and good DC accuracy
- Moderate bandwidth suitable for instrumentation, active filters, and servo apps
- Stable over a wide temperature range (good temperature stability)
- Flexible supply operation (usable with dual or single supplies within standard ranges)
- Pin-compatible DIP packaging (DP indicates dual in DIP-8) for easy replacement in legacy designs
Note: Exact electrical specs (offset, drift, noise, GBP, slew rate, supply range) vary by variant and must be checked in the specific datasheet.

Package

OP07DP is the plastic DIP version of the OP07 — an 8-pin DIP (DIP-8) through-hole package.

Pinout

- Pin count: 8 pins (DIP-8 package).
- Function: Dual precision operational amplifier (OP07 family) with low offset and low drift for precision signal amplification (requires dual supply).

Manufacturer

OP07DP is manufactured by Analog Devices, Inc. (ADI). Analog Devices is a multinational American semiconductor company that designs and manufactures analog, mixed-signal, and DSP integrated circuits, including precision op-amps.

Application

OP07DP is a dual precision op-amp. Common applications:
- High-precision instrumentation and measurement front-ends
- Sensor signal conditioning with low offset and drift
- DC and low-frequency amplification
- Precision integrators and active filters
- Servo loops and control circuitry
- Instrumentation amplifiers and buffering in test equipment

Equivalent

Equivalents to OP07DP (dual low‑offset precision op-amp) include:
- LT1013 (Linear Technology) – dual
- LT1012 (Linear Technology) – single
- OP27/OP27G (Analog Devices/Burr-Brown) – single
- OPA277 / OPA277A (Texas Instruments) – single
- OP07D/OP07 family variants from Analog Devices (pinout differences; verify)
Note: pinouts differ, so check datasheets before substitution.