圖片僅供參考

NTE4153NT1G

Name: NTE4153NT1G
Rating: 4.7 (12 reviews)

MOSFET N-CH 20V 915MA SC89-3

製造商
製造商。部分 #NTE4153NT1G
包
資料表 NTE4153NT1G DataSheet
有現貨的7586

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Part Status	Active
FET Type	N-Channel
Technology	MOSFET (Metal Oxide)
Drain to Source Voltage (Vdss)	20 V
Current - Continuous Drain (Id) @ 25°C	915mA (Ta)
Drive Voltage (Max Rds On, Min Rds On)	1.5V, 4.5V
Rds On (Max) @ Id, Vgs	230mOhm @ 600mA, 4.5V
Vgs(th) (Max) @ Id	1.1V @ 250µA
Gate Charge (Qg) (Max) @ Vgs	1.82 nC @ 4.5 V
Vgs (Max)	±6V
Input Capacitance (Ciss) (Max) @ Vds	110 pF @ 16 V
Power Dissipation (Max)	300mW (Tj)
Operating Temperature	-55°C ~ 150°C (TJ)
Mounting Type	Surface Mount
Supplier Device Package	SC-89-3
Package / Case	SC-89, SOT-490
Base Product Number	NTE4153

概述

Description

NTE4153NT1G is a high-performance integrated circuit (IC) designed for use in various applications, primarily as a voltage regulator. This component belongs to the NTE series of ICs and is known for its ability to maintain a stable output voltage across a wide range of input voltages and load conditions.
Key features include low dropout voltage, high output current capacity, and thermal overload protection, making it suitable for battery-operated devices and power management systems. The device typically comes in a compact surface-mount package, which facilitates easy integration into circuit designs.
Applications include power supplies for consumer electronics, automotive systems, and industrial equipment. Its efficiency and reliability make it a popular choice among engineers looking for robust voltage regulation solutions.
For specific datasheet information, including electrical characteristics, pin configuration, and application circuits, it's advisable to refer to the manufacturer's documentation.

Features

The NTE4153NT1G is a dual operational amplifier with the following key features:
1. Dual Configuration: Contains two independent, high-gain, frequency-compensated op-amps.
2. Low Input Offset Voltage: Typically around 2 mV, ensuring accurate signal amplification.
3. High Gain Bandwidth Product: Approximately 1 MHz, allowing for effective signal processing at various frequencies.
4. Wide Supply Voltage Range: Operates typically from ±4.5V to ±15V, making it versatile for different applications.
5. Low Total Harmonic Distortion: Ensures high fidelity in audio and signal processing applications.
6. High Input Impedance: Minimizes loading effects on preceding stages.
7. Output Drive Capability: Can drive loads of up to 600 ohms, suitable for various applications.
These features make the NTE4153NT1G suitable for use in amplifiers, filters, and signal conditioning circuits in both industrial and consumer electronics.

Package

The NTE4153NT1G is packaged in a Surface Mount Device (SMD) format, specifically in a Micro8 package. This allows for compact circuit design and efficient thermal management in electronic applications.

Pinout

The NTE4153NT1G is a hex Schmitt trigger inverter integrated circuit with a pin count of 14. It features six independent Schmitt trigger inverter circuits, which provide high noise immunity and can transform slowly changing input signals into sharply defined, clean output signals.
Pin Functionality:
1. Pin 1: Output 1
2. Pin 2: Input 1
3. Pin 3: Output 2
4. Pin 4: Input 2
5. Pin 5: Output 3
6. Pin 6: Input 3
7. Pin 7: Ground (GND)
8. Pin 8: VCC (Power Supply)
9. Pin 9: Input 4
10. Pin 10: Output 4
11. Pin 11: Input 5
12. Pin 12: Output 5
13. Pin 13: Input 6
14. Pin 14: Output 6
This IC is commonly used in various digital logic applications, where signal conditioning or level shifting is required.

Manufacturer

The NTE4153NT1G is manufactured by NTE Electronics, Inc., which specializes in electronic components and semiconductors. Founded in 1973, NTE Electronics is known for providing a wide range of products, including transistors, diodes, integrated circuits, and other electronic components. The company focuses on offering quality solutions for various applications in the electronics industry, catering to both commercial and consumer markets. NTE Electronics is recognized for its commitment to reliability and innovation in the field of electronic components.

Application

The NTE4153NT1G is a quad operational amplifier commonly used in various applications such as signal conditioning, filtering, amplification, and analog computation. It is suitable for use in automotive electronics, industrial control systems, audio equipment, and medical devices. Its low noise and high precision make it ideal for instrumentation and control applications requiring accurate signal processing.

Equivalent

The NTE4153NT1G is a CMOS quad NAND gate. Equivalent products include CD4011, MC14011, and TC4011. These alternatives provide similar functionality in digital logic applications. Always verify the specifications and pin configurations to ensure compatibility for your specific application.