圖片僅供參考

MX25R8035FBDIL0

Name: MX25R8035FBDIL0
Rating: 4.7 (12 reviews)

IC FLASH 8MBIT SPI/QUAD 8WLCSP

製造商
製造商。部分 #MX25R8035FBDIL0
包
資料表 MX25R8035FBDIL0 DataSheet
有現貨的3089

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Series	MXSMIO™
Part Status	Not For New Designs
Base Product Number	MX25R8035
DigiKey Programmable	Not Verified
Memory Type	Non-Volatile
Memory Format	FLASH
Technology	FLASH - NOR
Memory Size	8Mbit
Memory Organization	1M x 8
Memory Interface	SPI - Quad I/O
Clock Frequency	33 MHz
Write Cycle Time - Word, Page	100µs, 10ms
Voltage - Supply	1.65V ~ 3.6V
Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount
Package	8-UFBGA, WLCSP
Supplier Device Package	8-WLCSP
Packaging	Tape & Reel (TR)

概述

Description

MX25R8035FBDIL0 is a Macronix serial NOR flash memory part from the MX25R family. It provides non-volatile storage for embedded systems (firmware and data) and is accessed over an SPI-compatible interface. Key points:
- Density/format: part of the MX25R family (serial NOR flash; intended for code/data storage).
- Interface: SPI (standard) with optional dual/quad I/O modes on some variants for higher throughput.
- Operations: supports read, fast read, page program, sector/block erase, write enable/disable, and security/protection features; includes deep power-down for low power.
- Package/conditions: typically available in an 8-pin package (IL0 or similar) with industrial temperature ranges.
- Use cases: boot code storage, firmware updates, data logging in microcontroller-based systems.
Note: exact capacity, voltage ranges, timing (speed), and I/O mode support should be verified in the official datasheet for MX25R8035FBDIL0, as details vary by device revision and packaging.

Features

Key features of MX25R8035FBDIL0:
- Density: 8 Mbit Serial NOR Flash
- Voltage: 2.7–3.6 V (3V device)
- Interface: SPI with support for Standard SPI, Dual I/O, Quad I/O, and QPI modes
- Speed: up to 104 MHz in SPI; up to 133 MHz in QPI/Dual/Quad modes
- Memory organization: 256-byte page, erase blocks/sectors
- Erase sizes: 4 KB sectors and 64 KB blocks
- Endurance/Retention: ~100,000 erase/program cycles; data retention ~20 years
- Power modes: active, deep power-down; low standby current
- Security/Protection: hardware write protection (WP/HOLD) and BP protection
- Package: 8-pin DIP (DIL-8) package
- Operating temp: typically -40 to 85°C (industrial)
Ideal for boot code, code storage, and small embedded applications requiring low pin count and flexible SPI/QPI options.

Package

8-pin SOIC (SOP-8) package.

Pinout

- Pin count: 8 pins (8-pin package, e.g., SOP-8/WSON-8)
- Function: Quad I/O SPI serial flash memory (non-volatile). Pins: IO0–IO3 for data I/O, CLK (serial clock), CS (chip select), VCC, and GND.

Manufacturer

- Manufacturer: Macronix International Co., Ltd. (MXIC)
- What kind of company: A Taiwan-based semiconductor company that designs and manufactures non-volatile memory ICs (NOR/NAND flash, ROM, etc.), i.e., an integrated device manufacturer (IDM) of memory products.

Application

MX25R8035FBDIL0 is a serial NOR flash memory used to store firmware, code, and data in embedded systems. Common applications:
- Boot memory and in-system programming for MCUs/SoCs
- Firmware updates (including OTA)
- Nonvolatile configuration and calibration data
- Data logging and event storage for sensors
- Secure, reliable storage in automotive, industrial, consumer electronics, IoT, wearables, and medical devices

Equivalent

Equivalent products (8 Mbit SPI NOR Flash, similar package/voltage):
- Winbond W25Q80DV / W25Q80BV
- GigaDevice GD25Q80B
- ISSI IS25LP080D
- Micron N25Q080A
- Macronix MX25L8035F (family)
Note: verify exact voltage, timing, and Quad/Dual I/O features for drop-in compatibility.