MC33926AES

圖片僅供參考

MC33926AES

H-BRIDGE, BRUSHED DC MOTOR DRIVE

  • 製造商
  • 製造商。 部分 #MC33926AES
  • 包 WFDFN-10
  • 資料表
  • 有現貨的2691

100%原創; 新

24小時準備發貨

365天保修

RFQ&; 獲得更多折扣

規格

Package Tray
ProductStatus Active
MotorType-Stepper Bipolar
MotorType-ACDC Brushed DC
Function Driver - Fully Integrated, Control and Power Stage
OutputConfiguration Half Bridge (2)
Interface Parallel
Technology CMOS
Applications Automotive, DC Motors
Current-Output 5A
Voltage-Supply 5V ~ 28V
Voltage-Load 5V ~ 28V
OperatingTemperature -40°C ~ 125°C (TA)
MountingType Surface Mount, Wettable Flank
Package/Case 10-WFDFN Exposed Pad

概述

Description

MC33926AES is a dual high-current motor-driver IC from NXP (Freescale). It provides two independent H-bridges to drive DC motors from a 5–28 V supply. Each bridge is controlled by logic inputs (IN1/IN2 and IN3/IN4) or PWM for speed and direction, and it includes current-sense outputs for feedback. Protections include undervoltage lockout, overcurrent/short-circuit protection, and overtemperature shutdown, plus deadtime to prevent shoot-through. It’s suited for robotics, hobbyist motor controllers, and small automotive/industrial motors. The AES suffix indicates a specific package/variant; check the datasheet for exact pinout, per-channel current ratings, power dissipation, and thermal data.

Features

Here are the key features of the MC33926AES:
- Dual high-current half-bridge motor driver (two H-bridges) for DC motors.
- Wide operation: 5–28 V nominal motor supply (handles automotive transients).
- Integrated low Rds(on) MOSFETs for high efficiency.
- PWM-compatible inputs to control direction, braking, and speed for each bridge.
- Current monitoring and protection: overcurrent/short-circuit protection with current-limiting; IS pin for motor current feedback.
- Fault protection and diagnostics: UVLO, overtemperature, overcurrent, short-to-GND/short-to-Vcc protections; DIAG/diagnostic output (open-drain) for fault reporting.
- Brake and enable features: dedicated brake function and enable control per bridge.
- Automotive-grade/ AES variant with extended temperature range and robust protection suitable for automotive environments.
- Compact single-package solution reduces BOM and board space.

Package

MC33926AES comes in a 28-pin HTSSOP (Power-SSOP) package with an exposed pad; this is the automotive-grade variant.

Pinout

- Pin count: 28 pins (packages include 28‑pin SOIC/LQFP/DIP).
- Function: Dual high‑current H‑bridge motor driver with current sensing and protection.
- Provides two full bridges (four motor outputs): OUT1/OUT2 (Bridge A) and OUT3/OUT4 (Bridge B).
- Power: VBAT (motor supply) and GND.
- Control: IN1/IN2 for Bridge A, IN3/IN4 for Bridge B (plus enable/drive control as applicable).
- Sensing/limit: IS1/IS2 current-sense outputs with VREF to set current limit.
- Diagnostic: FAULT/DIAG status output.
- Protection: undervoltage, overcurrent, thermal shutdown.

In short: MC33926AES is a 28‑pin dual motor H‑bridge driver with built‑in protection, current sensing, and diagnostic feedback suitable for driving two DC motors from a single device.

Manufacturer

Manufacturer: NXP Semiconductors (the MC33926AES is the automotive version of the MC33926; originally from Freescale Semiconductor, now part of NXP).
What kind of company: NXP is a Dutch multinational semiconductor company that designs and manufactures integrated circuits and electronics for automotive, industrial, and consumer applications.

Application

- Voltage range: 5–28 V
- Automotive DC motor drives (power windows/seats/door locks/HVAC actuators)
- Robotics (DC motor driving for hobby/education robots)
- Industrial automation (actuators, conveyors, pumps, fans)
- General embedded/prototyping projects needing rugged high-current motor drive

Equivalent

Equivalent products (dual high-side/low-side brushed DC motor drivers) include:
- TI DRV8412
- TI DRV8833
- ST L6201/L6202/L6205
- ST L298N
- Allegro A4950/A4954
- Onsemi MC33887/MC33886
Note: choose by voltage/current rating, package, and protection features to match MC33926AES.

船舶

運輸管道我們

通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。


運費參攷(DHL/FedEx):

動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。

聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。

掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。

支付

Payment Methods

付款條件為100%預付。

現時,我們只接受以下付款方式:

1. 貝寶

2. 信用卡/借記卡

3. 電匯