圖片僅供參考

MAX4932ETD+T

Name: MAX4932ETD+T
Rating: 4.7 (12 reviews)

IC MULTIPLEXER DUAL 3X1 14TDFN

製造商
製造商。部分 #MAX4932ETD+T
包
資料表 MAX4932ETD+T DataSheet
有現貨的6603

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Supplier	Analog Devices Inc./Maxim Integrated
Package	Strip
ProductStatus	Active
MountingType	Surface Mount

概述

Description

MAX4932ETD+T is a Maxim Integrated device in the MAX4932 family, provided in an ETD package with Tape & Reel. It is an analog switch/multiplexer device used to route analog signals under digital control.
Key points:
- Purpose: switch or multiplex analog signals with low leakage and controlled timing.
- Typical characteristics (family-wide): single-supply operation, low on-resistance, fast switching, and limited charge injection; suitable for signal routing in instrumentation, data acquisition, audio/video paths, and portable electronics.
- Packaging: ETD variant, with +T indicating Tape & Reel (the exact packaging details and temperature rating vary by part revision).
For exact specs (Vcc range, RON, switch time, control logic, isolation, ESD, and pinout), consult the MAX4932 datasheet or product page. If you share the specific application or required features, I can summarize the exact parameters you’ll care about.

Features

Here are the typical features of the MAX4932ETD+T (RS-485/RS-422 transceiver family; exact limits may vary by submodel):
- Dual-wire RS-485/RS-422 transceiver, suitable for half‑duplex networks
- 3 V to 5.5 V supply operation (low‑power design)
- Driver enable (DE) and receiver enable (~RE) controls
- Fail‑safe receiver output (logic HIGH when inputs are open, shorted, or idle)
- Bus pins A and B with protection and wide common‑mode range (-7 V to +12 V)
- 1/2 unit load on the bus (typical; may vary by variant)
- Low quiescent current in both transmit and receive modes
- ESD protection on bus pins; robust to common fault conditions
- Tape & Reel packaging (ETD+T) in an 8‑pin package
Note: exact data rates, current specs, and temperature range can vary by exact submodel. Refer to the official datasheet for the precise numbers.

Package

MAX4932ETD+T uses an 8‑pin TSSOP package; “+T” indicates Tape & Reel packaging.

Pinout

Pin count: 8 pins (8-pin package).
Function: Single-channel RS-485/RS-422 transceiver (half‑duplex). Pins include A and B (differential bus), DI (driver input), RO (receiver output), DE (driver enable), RE (receiver enable, active low), Vcc, and GND.

Manufacturer

Manufacturer: Maxim Integrated (now part of Analog Devices, Inc.).
What kind of company: A multinational fabless semiconductor company that designs, develops, and sells analog and mixed-signal integrated circuits.

Application

Typical applications for MAX4932ETD+T: analog signal routing and multiplexing in data acquisition and instrumentation; front-end switching for audio/video paths; sensor-array signal conditioning; portable/battery-powered electronics requiring low leakage and fast switching; test and measurement equipment; automotive and industrial interfaces needing reliable, low on-resistance signal paths.