圖片僅供參考
MAX14931AAWE+
DGTL ISOLTR 2.75KV 4CH GP 16SOIC
- 製造商
- 製造商。 部分 #MAX14931AAWE+
- 包
- 資料表
- 有現貨的5330
100%原創; 新
24小時準備發貨
365天保修
RFQ&; 獲得更多折扣
規格
| Part Status | Active |
| Base Product Number | MAX14931 |
| Technology | Capacitive Coupling |
| Type | General Purpose |
| Isolated Power | No |
| Number of Channels | 4 |
| Inputs - Side 1/Side 2 | 3/1 |
| Channel Type | Unidirectional |
| Voltage - Isolation | 2750Vrms |
| Common Mode Transient Immunity (Min) | 25kV/µs (Typ) |
| Data Rate | 1Mbps |
| Propagation Delay tpLH / tpHL (Max) | 54.1ns, 55.3ns |
| Pulse Width Distortion (Max) | 4.5ns |
| Rise / Fall Time (Typ) | 2ns, 2ns |
| Voltage - Supply | 1.71V ~ 5.5V |
| Operating Temperature | -40°C ~ 125°C |
| Mounting Type | Surface Mount |
| Package | 16-SOIC (0.295", 7.50mm Width) |
| Supplier Device Package | 16-SOIC |
| Packaging | Tube |
概述
Description
MAX14931AAWE+ is a hot‑swap controller from Maxim Integrated designed to protect and manage a power rail during card insertion/removal and power sequencing. It drives an external MOSFET to control inrush current and overall rail health, while monitoring voltage and current to detect faults.
Key ideas:
- Allows controlled turn‑on/turn‑off with programmable soft‑start and current limit
- Provides fault protections (e.g., over/undervoltage, overcurrent/short‑circuit, thermal monitoring)
- Outputs a fault/status signal for system signaling and safe shutdown/retry behavior
- Suited for high‑reliability systems like backplanes, servers, telecom equipment, and data‑center power rails
Usage note:
- Typically paired with an external MOSFET in series with the supply
- Used to ensure safe startup, robust overcurrent protection, and orderly rail disconnection if problems occur
For exact voltage range, current‑limit settings, timing, and pinout, consult the MAX14931AAWE+ datasheet and packaging details.
Key ideas:
- Allows controlled turn‑on/turn‑off with programmable soft‑start and current limit
- Provides fault protections (e.g., over/undervoltage, overcurrent/short‑circuit, thermal monitoring)
- Outputs a fault/status signal for system signaling and safe shutdown/retry behavior
- Suited for high‑reliability systems like backplanes, servers, telecom equipment, and data‑center power rails
Usage note:
- Typically paired with an external MOSFET in series with the supply
- Used to ensure safe startup, robust overcurrent protection, and orderly rail disconnection if problems occur
For exact voltage range, current‑limit settings, timing, and pinout, consult the MAX14931AAWE+ datasheet and packaging details.
Package
28‑pin TQFN (5x5 mm), Pb‑free RoHS (WE+ variant).
Pinout
- Pin count: 20 pins (20-pin package)
- Function: High-side hot-swap controller with an external N-channel MOSFET gate driver, providing inrush/current-limit protection and fault protection (UVLO, overcurrent, etc.) for a supply rail.
- Function: High-side hot-swap controller with an external N-channel MOSFET gate driver, providing inrush/current-limit protection and fault protection (UVLO, overcurrent, etc.) for a supply rail.
Manufacturer
- Manufacturer: Maxim Integrated
- What kind of company: An American semiconductor company that designs and manufactures analog and mixed-signal integrated circuits (now part of Analog Devices).
- What kind of company: An American semiconductor company that designs and manufactures analog and mixed-signal integrated circuits (now part of Analog Devices).
Application
Applications (typical):
- Hot-swap protection and current limiting for DC power rails
- Power-supply sequencing and fault protection in servers, telecom, and data-center equipment
- Backplanes and distribution boards, ORing/ideal-diode architectures
- High-side switch control for redundant supply architectures
- Industrial and battery-backed systems, and point-of-load control for DC-DC converters
MAX14931AAWE+ is used in power-management and protection roles across these areas.
- Hot-swap protection and current limiting for DC power rails
- Power-supply sequencing and fault protection in servers, telecom, and data-center equipment
- Backplanes and distribution boards, ORing/ideal-diode architectures
- High-side switch control for redundant supply architectures
- Industrial and battery-backed systems, and point-of-load control for DC-DC converters
MAX14931AAWE+ is used in power-management and protection roles across these areas.
Equivalent
MAX14931AAWE+ is an automotive single‑channel high‑side switch with current limit and fault protection (hot‑swap). Equivalent parts from other vendors include:
- TI: TPS1Hxxx/TPS269x high‑side switches and hot‑swap controllers
- Onsemi: NCP3xxx/NCP18xx hot‑swap controllers
- Analog Devices: ADM1166/ADM1262 hot‑swap controllers
- STMicroelectronics: VIPower high‑side switches (VIP/M0/M1 families)
- Infineon: VIPower/NovalithIC families
Exact cross‑reference depends on voltage/current ratings, packaging, and automotive grade requirements.
- TI: TPS1Hxxx/TPS269x high‑side switches and hot‑swap controllers
- Onsemi: NCP3xxx/NCP18xx hot‑swap controllers
- Analog Devices: ADM1166/ADM1262 hot‑swap controllers
- STMicroelectronics: VIPower high‑side switches (VIP/M0/M1 families)
- Infineon: VIPower/NovalithIC families
Exact cross‑reference depends on voltage/current ratings, packaging, and automotive grade requirements.
船舶
運輸管道我們
通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。
運費參攷(DHL/FedEx):
動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。
聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。
掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。
支付
Payment Methods
付款條件為100%預付。
現時,我們只接受以下付款方式:
1. 貝寶
2. 信用卡/借記卡
3. 電匯
類似的
-
MX25R8035FM1IL0
Macronix
-
MX25L3233FM1I-08Q
Macronix
-
MX25V1635FZNQ03
Macronix
-
MX25V16066M1I02
Macronix
-
MX30LF2G28AD-TI
Macronix
-
MX25R6435FBDIL0
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX25U25643GZNI00
Macronix
-
MX25L6433FM2I-08G
Macronix
-
MX25L12833FZNI-10..
Macronix
-
MX25L12835FZ2I-10..
Macronix
-
MX29F040CTI-70G
Macronix