M24C08-RDW6TP

The M24C08-RDW6TP is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) device produced by STMicroelectronics. It features 8 Kbits (1 Kbyte) of non-volatile memory that can be accessed through a two-wire I2C (Inter-Integrated Circuit) interface. This memory is suitable for applications requiring data storage that must remain intact even when power is removed.
Key features include:
- Operating voltage range: 1.8V to 5.5V.
- Maximum clock frequency of 1 MHz.
- Write endurance typically up to 1 million cycles and data retention of over 40 years.
- Supports multiple device addressing on the same I2C bus.
The M24C08 is commonly used in applications such as configuration storage, calibration settings, and device identification. Its compact size and low power consumption make it ideal for use in consumer electronics, industrial devices, and embedded systems. Overall, it provides a reliable solution for non-volatile memory needs in a variety of electronic applications.

The M24C08-RDW6TP is an EEPROM (Electrically Erasable Programmable Read-Only Memory) device with the following key features:
1. Memory Capacity: 8 Kbits (1 Kbyte) of non-volatile memory.
2. Interface: Utilizes I2C (Inter-Integrated Circuit) communication protocol for easy integration with microcontrollers.
3. Voltage Range: Operates within a supply voltage range of 2.5V to 5.5V, making it suitable for various power environments.
4. Data Retention: Guaranteed data retention for up to 40 years.
5. Endurance: Capable of withstanding up to 1 million write/erase cycles.
6. Byte or Page Write: Supports both byte-wise and page-wise writing, facilitating flexible data management.
7. I2C Addressing: Two selectable I2C addresses allow for multiple devices on the same bus.
8. Temperature Range: Typically specified for operation between -40°C to +85°C.
9. Small Package: Available in compact packaging options, enabling space-efficient designs.
These features make the M24C08-RDW6TP suitable for applications requiring reliable, low-power, and persistent storage solutions.

The M24C08-RDW6TP is offered in an SO8 (Small Outline 8-lead) package type, which is a surface-mount package. It is designed for efficient space utilization on printed circuit boards.

The M24C08-RDW6TP is an 8-Kbit EEPROM (Electrically Erasable Programmable Read-Only Memory) device. It has a total of 8 pins. The pin configuration and their functions are as follows:
1. VCC: Supply voltage (+2.5V to +5.5V)
2. GND: Ground
3. SDA: Serial Data Line for data input and output.
4. SCL: Serial Clock Line for synchronizing data transfers.
5. WP: Write Protect; when held low, write operations are enabled; when high, write operations are disabled.
6. A0, A1, A2: Address pins used to select one of multiple devices on the same bus (for up to 8 devices).
The M24C08-RDW6TP communicates via the I2C (Inter-Integrated Circuit) protocol, allowing multiple devices to connect on the same bus with minimal wiring.

The M24C08-RDW6TP is manufactured by STMicroelectronics. STMicroelectronics is a global semiconductor company that designs, develops, manufactures, and markets a wide range of semiconductor solutions. It serves various sectors, including automotive, industrial, personal electronics, and communication. The company is known for its innovative products in microcontrollers, analog devices, sensors, and memory solutions, among others. STMicroelectronics is headquartered in Geneva, Switzerland, and operates in multiple countries worldwide, contributing significantly to the electronics and technology industries.

The M24C08-RDW6TP is an EEPROM (Electrically Erasable Programmable Read-Only Memory) device typically used in applications such as data storage for microcontrollers, configuration settings in automotive systems, calibration data in industrial equipment, and non-volatile memory in consumer electronics. Its I²C interface makes it suitable for communication in embedded systems, enhancing the reliability and longevity of data in devices where frequent updating is not desired.

The M24C08-RDW6TP is an EEPROM chip with 1K x 8 bits capacity. Equivalent products include the AT24C08, 93C56, and 24C08. Ensure compatibility in terms of pin configuration, electrical characteristics, and communication protocol (I2C or SPI) when selecting a substitute. Always verify specifications for specific application requirements.