圖片僅供參考

M24C04-RMN6TP

Name: M24C04-RMN6TP
Rating: 4.7 (12 reviews)

IC EEPROM 4KBIT I2C 400KHZ 8SO

製造商
製造商。部分 #M24C04-RMN6TP
包 8-SOIC
資料表 M24C04-RMN6TP DataSheet
有現貨的5133

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Package	Tape & Reel (TR),Cut Tape (CT)
ProductStatus	Active
MemoryType	Non-Volatile
MemoryFormat	EEPROM
Technology	EEPROM
MemorySize	4Kb (512 x 8)
MemoryInterface	I²C
ClockFrequency	400 kHz
WriteCycleTime-WordPage	5ms
AccessTime	900 ns
Voltage-Supply	1.8V ~ 5.5V
OperatingTemperature	-40°C ~ 85°C (TA)
MountingType	Surface Mount
Package/Case	8-SOIC (0.154, 3.90mm Width)

概述

Description

The M24C04-RMN6TP is a 4 Kbit (512 x 8) serial EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by STMicroelectronics. It utilizes I2C (Inter-Integrated Circuit) protocol for communication, allowing easy integration into various electronic systems. The device operates with a supply voltage range of 1.8V to 5.5V, making it suitable for low-power applications.
Key features include:
- Memory Density: 4 Kbits of non-volatile storage.
- I2C Interface: Allows multiple devices on the same bus and supports multiple addresses.
- Data Retention: Typically up to 40 years, ensuring long-term storage of information.
- Write Cycle: Endurance of up to 1 million write/erase cycles per byte.
- Package Type: RMN6TP indicates a specific package style, usually in a 8-lead SOIC or similar, facilitating surface-mount technology (SMT).
This EEPROM is widely used in applications like consumer electronics, automotive systems, and industrial automation for configuration storage and data logging.

Package

The M24C04-RMN6TP is packaged in an 8-pin SOIC (Small Outline Integrated Circuit) package. This surface-mount package configuration is designed for efficient space utilization on printed circuit boards.

Pinout

The M24C04-RMN6TP is a 4 Kbit (512 x 8 bits) EEPROM device with a total of 8 pins. The pin configuration and their functions are as follows:
1. VCC: Supply voltage (2.5V to 5.5V).
2. GND: Ground.
3. SDA: Serial data line for data input/output.
4. SCL: Serial clock line for synchronizing data.
5. WP: Write protect; used to enable/disable write operations.
6. A0: Address pin to select between multiple devices on the same bus.
7. A1: Address pin to select between multiple devices on the same bus.
8. NC: No connection; not used.
The device operates using the I2C interface, allowing communication with microcontrollers and other devices. It is suitable for applications requiring non-volatile memory, such as data storage in embedded systems.

Manufacturer

The M24C04-RMN6TP is manufactured by Microchip Technology Inc. Microchip is a leading American semiconductor company that specializes in microcontroller, mixed-signal, analog, and flash-IP solutions. Founded in 1989, the company is known for its innovative products that serve a wide range of applications, including automotive, industrial, consumer, and communications. Microchip provides various integrated circuits and development tools that enable engineers to design and implement electronic systems efficiently. The M24C04-RMN6TP itself is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) device, which is commonly used for data storage in embedded systems.

Application

The M24C04-RMN6TP is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) primarily used in applications requiring non-volatile data storage. Typical application areas include consumer electronics, automotive systems, smart cards, and medical devices for storing configuration data, calibration settings, and user preferences. It is also employed in industrial automation for control systems and in communication devices for firmware and data retention.

Equivalent

The M24C04-RMN6TP is an EEPROM (Electrically Erasable Programmable Read-Only Memory) chip. Equivalent products include:
1. AT24C04 (Atmel/Microchip)
2. 24C04 (Microchip Technology)
3. 93C56 (Microchip Technology, though slightly different)
4. CAT24C04 (ON Semiconductor)
Ensure compatibility in terms of voltage, pin configuration, and memory size before substitution.