LTM8023MPV#PBF

Introduction to LTM8023MPV#PBF:
- It’s a Linear Technology/Analog Devices μModule DC-DC buck regulator. The LTM8023MPV#PBF is a fully integrated switching regulator module that contains the power MOSFETs, inductor, controller, and essential support components in a single compact package, for easy board-level power conversion with minimal external parts.
- Key features: wide input voltage range; adjustable (or fixed) output via a feedback network; high efficiency; integrated protections (current limit/overcurrent, thermal shutdown, undervoltage/overvoltage as applicable); soft-start; enable and power-good options depending on variant; remote sense available on some versions.
- Package/suffix: MPV denotes the module footprint/variant; PBF indicates Pb-free, RoHS-compliant packaging.
- Typical use: point-of-load regulation for FPGAs, CPUs, ASICs, and other devices requiring compact, reliable step-down conversion.
- Note: For exact electrical specs, pinout, and external component recommendations, consult the LTM8023MPV#PBF datasheet.

Here are the key features of LTM8023MPV#PBF (µModule buck regulator):
- Wide input range: 4.5V to 60V (suitable for industrial/automotive use)
- Integrated buck regulator with built‑in inductor and MOSFETs (no external inductor required)
- Adjustable output: 0.8V to about 5.0V via feedback network
- Output current: up to ~3A continuous (typical)
- Switching frequency: around 1.2 MHz (typical)
- High efficiency: optimized for low heat in typical apps
- Common protection features: undervoltage lockout, overvoltage protection, current/short-circuit protection, thermal shutdown
- Enable input and Power-Good (P.GOOD) signaling
- Remote sensing and accurate output voltage regulation
- Pb-free, RoHS-compliant package (MPV) with standard LGA-style footprint
Note: Exact voltage ranges, current capability, and pinout depend on the specific variant; refer to the datasheet for precise specs and application notes.

The LTM8023MPV#PBF uses the MPV μModule package (an LGA-style, Pb-free package used by Linear Technology).

Pin count: 16 pins (MPV package).
Function: LTM8023MPV#PBF is a dual-output, synchronous buck regulator μModule with an integrated inductor and MOSFETs. It takes VIN and provides two regulated outputs (VOUT1 and VOUT2). Typical pins include VIN, GND, VOUT1, VOUT2, FB1, FB2, EN, PGOOD, SS/CTRL, and ISENSE/ILIM, among others.

Manufacturer: Analog Devices, Inc. (ADI).
Company type: An American multinational semiconductor company that designs and manufactures analog, mixed-signal, and DSP integrated circuits (the LTM µModule family originated from Linear Technology, now part of ADI).

LTM8023MPV#PBF is a compact µModule DC-DC converter. Applications include:
- Portable and battery-powered devices (wearables, handhelds, sensors)
- Embedded/industrial systems (robotics, PLCs, motor control, instrumentation)
- Telecom/data-communications equipment (CPU/FPGA/ASIC rails)
- Automotive and aerospace/defense electronics
- Other space-constrained, high-density multi-rail power architectures