LTC6812ILWE-1#3ZZPBF

圖片僅供參考

LTC6812ILWE-1#3ZZPBF

IC BATT MON MULTI 1-15C 64LQFP

  • 製造商
  • 製造商。 部分 #LTC6812ILWE-1#3ZZPBF
  • 包
  • 資料表
  • 有現貨的17925

100%原創; 新

24小時準備發貨

365天保修

RFQ&; 獲得更多折扣

規格

Part Status Discontinued at DigiKey
Base Product Number LTC6812
Function Battery Monitor
Battery Chemistry Multi-Chemistry
Number of Cells 1 ~ 15
Interface I2C, SPI
Operating Temperature -40°C ~ 85°C (TJ)
Grade Automotive
Mounting Type Surface Mount
Package 64-LQFP Exposed Pad
Supplier Device Package 64-LQFP-EP (10x10)
Packaging Tray

概述

Description

The LTC6812ILWE-1#3ZZPBF is a Linear/Analog Devices battery-management IC in the LTC6812 family. It is a 12-channel battery monitor designed for series-connected Li‑ion/Li‑ion packs, used in BMS applications. Key ideas:
- Monitors up to 12 individual cell voltages, plus pack current sensing and fault diagnostics.
- Supports active cell balancing via external FETs and a daisy-chained SPI-like interface to a host MCU or other LTC6812 devices, scalable for large packs.
- Provides diagnostic and protection features suitable for automotive, energy storage, and portable power applications.
The suffixes ILWE-1 and #3ZZPBF denote package/variant and manufacturing traceability:
- ILWE-1 indicates a specific package/temperature grade variant of the device.
- #3ZZPBF is the production lot/revision code and Pb-free (lead-free) marking for sourcing and compliance.

Features

Here are the key features of LTC6812ILWE-1 #3ZZPBF (battery monitor/balancer):
- 12-channel cell-voltage monitoring per device for Li-ion stacks; supports larger packs via daisy-chaining multiple LTC6812 devices.
- Passive per-cell balancing with on-chip drives (per-channel balancing capability).
- SPI-like serial interface with daisy-chain capability for multiple devices on a common bus.
- High-accuracy cell voltage measurements with built-in calibration and diagnostic data.
- Fault/diagnostic features: over/under voltage, open/short cell conditions, and other pack-health alarms.
- CRC/data integrity for communications and self-test capabilities.
- Low quiescent current with wake/sleep operation for power efficiency.
- Industrial temperature range and packaging suitable for BMS environments (ILWE variant; RoHS compliant).
Note: For exact electrical specs (voltage range, accuracy, balancing current, timing, and pinout), please refer to the LTC6812 datasheet and the specific package VARIANT documentation.

Package

It uses a 28-pin TSSOP package (Pb-free, RoHS compliant).

Pinout

- Pin count: 28 pins (28-pin package typical for LTC6812 variants).
- Function: 12-channel battery cell monitor for multi-cell packs; measures cell voltages (VC1–VC12) and pack voltage, and communicates to a host MCU via a four-wire SPI-like interface (SCK, SDI, SDO, CS) in a daisy-chain capable configuration.

Manufacturer

Manufacturer: Analog Devices, Inc. (ADI). It is an American multinational semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing integrated circuits (ADI acquired Linear Technology in 2017).

Application

Application areas: Battery management systems for multi-cell lithium‑ion packs (up to 12 cells in series). Used in automotive and light‑duty EV battery packs, stationary energy‑storage systems (home, commercial, grid‑scale), solar/wind storage, UPS and telecom backup batteries, industrial and robotics power packs, and smart tool batteries. It monitors individual cell voltages, pack current, and temperature to enable safe operation, fault detection, and integration with a BMS controller for protection and balancing.

船舶

運輸管道我們

通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。


運費參攷(DHL/FedEx):

動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。

聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。

掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。

支付

Payment Methods

付款條件為100%預付。

現時,我們只接受以下付款方式:

1. 貝寶

2. 信用卡/借記卡

3. 電匯