圖片僅供參考
LP2950CDTX-5.0
LP2950 -FIXED MICROPOWER VOLTAGE
- 製造商
- 製造商。 部分 #LP2950CDTX-5.0
- 包 TO-252-3
- 資料表
- 有現貨的6748
100%原創; 新
24小時準備發貨
365天保修
RFQ&; 獲得更多折扣
規格
| Package | Bulk |
| ProductStatus | Active |
概述
Description
LP2950CDTX-5.0 is a fixed 5 V low-dropout regulator (LDO) in the LP2950 family. It accepts inputs above 5 V and provides a regulated 5 V output with a small dropout voltage (about 0.5 V at moderate loads). It includes standard LDO protections (overcurrent and thermal shutdown) and is suitable for battery-powered or portable electronics due to its simple, low-power operation. The CDTX suffix indicates the specific package variant; pinout depends on the package (typical fixed-version: Vin, GND, Vout; verify with the datasheet for exact arrangement). For stability, use the recommended input and output capacitors (a capacitor on the input and a few microfarads with appropriate ESR on the output). Common uses include microcontroller rails, sensors, and other 5 V subsystems in compact, cost-effective designs. In short: a compact, fixed 5 V LDO for moderate-current applications with built-in protection and straightforward use.
Features
Here are the key features of LP2950CDTX-5.0 (5.0 V fixed output):
- Fixed 5.0 V output
- Up to ~100 mA load current
- Low dropout voltage (about 0.5 V at 100 mA)
- Very low quiescent current for battery-powered use
- Good line and load regulation
- Internal current limit and thermal/shutdown protection
- Short-circuit protection
- Requires external capacitors for stability: input cap (≥0.33 µF) and output cap (≥10 µF, with suitable ESR)
- Wide input voltage range (works with inputs above the dropout to regulate reliably)
Note: Packaged in CDTX variant and intended for use with proper external capacitors to ensure stability and performance.
- Fixed 5.0 V output
- Up to ~100 mA load current
- Low dropout voltage (about 0.5 V at 100 mA)
- Very low quiescent current for battery-powered use
- Good line and load regulation
- Internal current limit and thermal/shutdown protection
- Short-circuit protection
- Requires external capacitors for stability: input cap (≥0.33 µF) and output cap (≥10 µF, with suitable ESR)
- Wide input voltage range (works with inputs above the dropout to regulate reliably)
Note: Packaged in CDTX variant and intended for use with proper external capacitors to ensure stability and performance.
Package
SOT-223 surface-mount package. (DT/DTX suffixes indicate SOT-223; TX means taped & reeled.)
Pinout
- Pin count: 3 signal pins plus a mounting/heatsink tab (tab tied to ground).
- Function: fixed 5.0 V low-dropout linear regulator (LP2950CDTX-5.0).
- Pin assignment (looking at package front, left-to-right): Pin 1 = GND, Pin 2 = OUTPUT (5.0 V), Pin 3 = INPUT. Tab = GND.
- Notes: micropower LDO, typically rated for up to ~100 mA output; requires input a few hundred mV above 5.0 V (dropout depends on load).
- Function: fixed 5.0 V low-dropout linear regulator (LP2950CDTX-5.0).
- Pin assignment (looking at package front, left-to-right): Pin 1 = GND, Pin 2 = OUTPUT (5.0 V), Pin 3 = INPUT. Tab = GND.
- Notes: micropower LDO, typically rated for up to ~100 mA output; requires input a few hundred mV above 5.0 V (dropout depends on load).
Manufacturer
Manufacturer: Texas Instruments (TI). TI is an American multinational corporation that designs and manufactures semiconductors and related electronics; it acquired National Semiconductor, so LP2950 devices are now produced under the TI brand. TI specializes in analog and mixed-signal integrated circuits.
Application
LP2950CDTX-5.0 is a 5V fixed-output low-dropout regulator. Typical applications:
- Power supply for microcontrollers, DSPs, and memories in consumer electronics
- Battery-powered portable devices needing low dropout and good regulation
- Post-regulation for sensors, analog front-ends, and op-amps requiring a clean 5V rail
- Embedded systems, development boards, and small instruments
- General 5V rail generation in set-top boxes, audio/video gear, and instrumentation
- Power supply for microcontrollers, DSPs, and memories in consumer electronics
- Battery-powered portable devices needing low dropout and good regulation
- Post-regulation for sensors, analog front-ends, and op-amps requiring a clean 5V rail
- Embedded systems, development boards, and small instruments
- General 5V rail generation in set-top boxes, audio/video gear, and instrumentation
Equivalent
Common equivalents to LP2950CDTX-5.0 (5 V, 100 mA LDO) include:
- AMS1117-5.0
- LM1117-5.0
- TLV1117-5.0
- NCP1117-5.0
- MIC5205-5.0
- MCP1700-5.0
Note: pinouts, packages, and dropout can differ; check datasheets for footprint and performance before substitution.
- AMS1117-5.0
- LM1117-5.0
- TLV1117-5.0
- NCP1117-5.0
- MIC5205-5.0
- MCP1700-5.0
Note: pinouts, packages, and dropout can differ; check datasheets for footprint and performance before substitution.
船舶
運輸管道我們
通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。
運費參攷(DHL/FedEx):
動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。
聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。
掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。
支付
Payment Methods
付款條件為100%預付。
現時,我們只接受以下付款方式:
1. 貝寶
2. 信用卡/借記卡
3. 電匯
類似的
-
MX25L3233FZBI-08Q
Macronix
-
MX25L3233FM1I-08Q
Macronix
-
MX25V1635FZNI
Macronix
-
MX25V1635FZNQ03
Macronix
-
MX29F400CBTI-70G
Macronix
-
MX25V5126FM1I
Macronix
-
MX25R3235FZNIL0
Macronix
-
MX25V16066M2I02
Macronix
-
MX29GL512FHXFI-11..
Macronix
-
MX25L2006EM1I-12G
Macronix
-
MX25V1635FM2I
Macronix
-
MX25L12833FZ2I-10..
Macronix