LMR36503R5RPER

圖片僅供參考

LMR36503R5RPER

IC REG BUCK 5V 300MA 9VQFN

  • 製造商
  • 製造商。 部分 #LMR36503R5RPER
  • 包
  • 資料表
  • 有現貨的6180

100%原創; 新

24小時準備發貨

365天保修

RFQ&; 獲得更多折扣

規格

Part Status Active
Base Product Number LMR36503
Function Step-Down
Output Configuration Positive
Topology Buck
Output Type Fixed
Number of Outputs 1
Voltage - Input (Min) 3V
Voltage - Input (Max) 65V
Voltage - Output (Min/Fixed) 5V
Current - Output 300mA
Frequency - Switching 200kHz ~ 2.2MHz
Synchronous Rectifier Yes
Operating Temperature -40°C ~ 150°C (TJ)
Mounting Type Surface Mount, Wettable Flank
Package 9-PowerVFQFN
Supplier Device Package 9-VQFN-HR (2x2)
Packaging Cut Tape (CT), Tape & Reel (TR)

概述

Description

The term "LMR36503R5RPER" doesn't seem to correspond to any widely recognized concept, product, or technology as of my last update. It could be a specific model number, part number, or code related to a product in a niche industry such as electronics, manufacturing, or technology. If "LMR36503R5RPER" is a proprietary or newly released item, detailed information might be available through specific industry channels, company releases, or technical documentation provided by the manufacturer.
For a concise introduction, consider the following steps:
1. Identify the Source: Check if "LMR36503R5RPER" is linked to a particular company or industry.
2. Determine the Category: Figure out if it is hardware, software, a component, or another type of product.
3. Consult Specific Resources: Look into manufacturer websites, tech forums, or industry-specific publications for the most relevant information.
If this is part of a new release or confidential development, specific details might be restricted to authorized personnel or available only in specialized industry contexts.

Features

The LMR36503R5RPER is a step-down DC-DC converter from Texas Instruments. It features a wide input voltage range, typically from 4.2V to 65V, making it suitable for various applications. The device provides a regulated output voltage, configurable via external resistors, with a maximum output current typically around 0.6A to 1A, depending on configuration.
Key features include a high-efficiency synchronous rectification, which helps reduce power loss, and a low quiescent current, optimizing it for battery-powered and energy-efficient applications. The converter operates at a 400 kHz fixed switching frequency, balancing performance and efficiency. It also includes protection features such as thermal shutdown, cycle-by-cycle current limit, and undervoltage lockout to enhance reliability.
The LMR36503R5RPER comes in a compact package, which is suitable for space-constrained designs. Its design supports minimal external components, simplifying the design process and reducing the overall system cost. This device is ideal for industrial, automotive, and consumer electronics applications that require efficient step-down voltage regulation.

Package

The package type for the LMR36503R5RPER is likely a surface-mount package, often used for power management ICs. For the most accurate information, consult the datasheet or manufacturer's specifications for this specific component.

Pinout

The LMR36503R5RPER is a synchronous step-down voltage converter from Texas Instruments. It is designed for high-efficiency power conversion. This particular model is part of the LMR36503 series, which is capable of driving up to 3.5 A of load current.
The LMR36503R5RPER typically comes in a 12-pin VQFN package. The functions of these pins generally include:
1. Vin: Input voltage supply.
2. SW: Switch node, connected to the inductor.
3. GND: Ground reference for the circuit.
4. FB: Feedback pin to set the output voltage.
5. EN: Enable pin for turning the device on or off.
6. RT: Resistor timing pin for setting the switching frequency.
7. PG: Power good indicator.
8. VCC: Internal regulator output.
9. SS/TRK: Soft-start or tracking function.
10. BOOT: Boost capacitor connection for driving the high-side FET.
11. SYNC/MODE: Synchronization or mode selection.
12. AGND: Analog ground.
This description should be cross-verified with the datasheet for detailed pin configuration and specific functions, as pin function assignments may vary slightly depending on the exact model and package variant.

Manufacturer

The LMR36503R5RPER is a part manufactured by Texas Instruments. Texas Instruments (TI) is a global technology company known for designing and producing semiconductors and various integrated circuits. The company develops analog chips, embedded processors, DLP® products, and other semiconductor solutions, serving a range of industries, including automotive, industrial, electronics, and communications. TI is recognized for its innovation in the semiconductor sector and has a strong presence in both the consumer and industrial markets.

Application

The LMR36503R5RPER is a DC-DC buck converter designed for applications that require efficient voltage regulation. Typical application areas include:
1. Consumer Electronics: Power supply for devices like smartphones, tablets, and wearable gadgets.
2. Automotive Systems: Used in infotainment systems, advanced driver-assistance systems (ADAS), and other in-vehicle electronics.
3. Industrial Equipment: Power management for automation and control systems.
4. Telecommunications: Power regulation in networking equipment and base stations.
5. IoT Devices: Energy-efficient power solutions for connected devices and sensors.

Equivalent

The LMR36503R5RPER is a DC-DC buck converter from Texas Instruments. Equivalent products might include similar step-down regulators from other manufacturers, such as the LM76003 from Texas Instruments, the MP2459 from Monolithic Power Systems, the TPS54302 from Texas Instruments, or the LTC3630A from Analog Devices. Always verify specifications like input voltage range, output current, switching frequency, and package type to ensure compatibility.

船舶

運輸管道我們

通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。


運費參攷(DHL/FedEx):

動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。

聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。

掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。

支付

Payment Methods

付款條件為100%預付。

現時,我們只接受以下付款方式:

1. 貝寶

2. 信用卡/借記卡

3. 電匯