圖片僅供參考
LAN91C113-NU
IC ETHERNET CTLR MAC PHY 128TQFP
- 製造商
- 製造商。 部分 #LAN91C113-NU
- 包 128-TQFP
- 資料表
- 有現貨的5972
100%原創; 新
24小時準備發貨
365天保修
RFQ&; 獲得更多折扣
規格
| Supplier | Microchip Technology |
| Package | Tray |
| ProductStatus | Active |
| Protocol | Ethernet |
| Function | Controller |
| Interface | Parallel |
| Standards | 10/100 Base-T/TX PHY |
| Voltage-Supply | 3.3V |
| Current-Supply | 100mA |
| OperatingTemperature | 0°C ~ 85°C |
| Package/Case | 128-TQFP |
概述
Description
LAN91C113-NU is an Ethernet controller from the LAN91Cxxx family (SMSC, now Microchip). It provides a 10/100 Mbps MAC and PHY in one chip to add network connectivity to embedded systems. The device is controlled by a host MCU/CPU via a parallel/PCI-type interface (depending on packaging) and includes TX/RX logic and packet buffers. It supports 10/100 auto-negotiation, half/full duplex modes, and standard IEEE 802.3 Ethernet frames. Typically a software driver is needed to initialize the hardware, configure speed/duplex, and manage packet transfers (often via DMA or I/O). It’s an older, well-documented part still seen in legacy designs, with newer LAN91Cxxx/LAN9xxx parts offering updated features. For exact pinout, interface mode, register map, and RAM requirements, consult the LAN91C113-NU datasheet and programmer’s guide.
Features
Key features of LAN91C113-NU:
- 10/100 Mbps Ethernet MAC/PHY with PCI host interface
- 32-bit PCI bus, supports 33/66 MHz
- Auto-negotiation; supports 10BASE-T and 100BASE-TX; full- and half-duplex
- MII/MDIO management interface for PHY control (external or integrated PHY)
- DMA-based data path with onboard TX/RX FIFOs and descriptor support
- Interrupts for RX/TX completion and error events
- IEEE 802.3/802.3u compliant; supports pause frames/flow control
- Software-friendly register interface with broad driver support
- Power-management features (D0 and low-power options)
(NU suffix details are device/package variants; features listed are core capabilities.)
- 10/100 Mbps Ethernet MAC/PHY with PCI host interface
- 32-bit PCI bus, supports 33/66 MHz
- Auto-negotiation; supports 10BASE-T and 100BASE-TX; full- and half-duplex
- MII/MDIO management interface for PHY control (external or integrated PHY)
- DMA-based data path with onboard TX/RX FIFOs and descriptor support
- Interrupts for RX/TX completion and error events
- IEEE 802.3/802.3u compliant; supports pause frames/flow control
- Software-friendly register interface with broad driver support
- Power-management features (D0 and low-power options)
(NU suffix details are device/package variants; features listed are core capabilities.)
Package
LAN91C113-NU comes in a 128-pin LQFP (lead-free, NU) package.
Pinout
- Pin count: 64 pins (64-pin package)
- Function: 10/100 Mbps Ethernet MAC/PHY controller (Ethernet NIC) for embedded systems.
- Function: 10/100 Mbps Ethernet MAC/PHY controller (Ethernet NIC) for embedded systems.
Manufacturer
Manufacturer: Standard Microsystems Corporation (SMSC).
Company type: A semiconductor company that designs networking ICs (e.g., Ethernet controllers, USB controllers). It has been acquired by Microchip Technology and operates as part of Microchip.
Company type: A semiconductor company that designs networking ICs (e.g., Ethernet controllers, USB controllers). It has been acquired by Microchip Technology and operates as part of Microchip.
Application
Typical applications for LAN91C113-NU include:
- Embedded systems needing 10/100 Mbps Ethernet (LAN add-on for microcontrollers/SoCs)
- Industrial automation and control networks
- Network gateways, routers, and edge devices
- Point-of-sale terminals, kiosks, and digital signage
- Small servers and network-attached storage
- IoT, data acquisition, and sensor networks
- Network-enabled consumer electronics and security devices
- Embedded systems needing 10/100 Mbps Ethernet (LAN add-on for microcontrollers/SoCs)
- Industrial automation and control networks
- Network gateways, routers, and edge devices
- Point-of-sale terminals, kiosks, and digital signage
- Small servers and network-attached storage
- IoT, data acquisition, and sensor networks
- Network-enabled consumer electronics and security devices
船舶
運輸管道我們
通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。
運費參攷(DHL/FedEx):
動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。
聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。
掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。
支付
Payment Methods
付款條件為100%預付。
現時,我們只接受以下付款方式:
1. 貝寶
2. 信用卡/借記卡
3. 電匯
類似的
-
MX25V1635FZNI
Macronix
-
MX25V1635FZNQ03
Macronix
-
MX25V5126FM1I
Macronix
-
MX25V16066M1I02
Macronix
-
MX25L8035EM2I-10G
Macronix
-
MX25R6435FBDIL0
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX29GL512FHXFI-11..
Macronix
-
MX25U51279GXDR00
Macronix
-
MX25U25643GZNI00
Macronix
-
MX25L2006EM1I-12G
Macronix
-
MX25L12833FM2I-10..
Macronix