圖片僅供參考
IS25LP016D-JMLE
IC FLASH 16MBIT SPI/QUAD 16SOIC
- 製造商
- 製造商。 部分 #IS25LP016D-JMLE
- 包 SOIC-16
- 資料表
- 有現貨的4232
100%原創; 新
24小時準備發貨
365天保修
RFQ&; 獲得更多折扣
規格
| Package | Tray |
| ProductStatus | Obsolete |
| MemoryType | Non-Volatile |
| MemoryFormat | FLASH |
| Technology | FLASH - NOR |
| MemorySize | 16Mb (2M x 8) |
| MemoryInterface | SPI - Quad I/O, QPI, DTR |
| ClockFrequency | 133 MHz |
| WriteCycleTime-WordPage | 800µs |
| Voltage-Supply | 2.3V ~ 3.6V |
| OperatingTemperature | -40°C ~ 105°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 16-SOIC (0.295, 7.50mm Width) |
概述
Description
IS25LP016D-JMLE is a 16‑Mbit serial flash memory from ISSI (Integrated Silicon Solution, Inc.) intended for firmware and data storage in embedded systems. It uses an SPI interface and supports standard SPI read/write; some variants also offer Dual/Quad I/O for higher throughput.
Key points
- Capacity and addressing: 16 Mbit of flash memory addressed via 3-byte addressing.
- Operations: supports page program, sector/block erase, and read operations; includes write-protect and security features.
- Interfaces: primary SPI interface with optional higher‑speed modes on supported variants.
- Power and timing: features low‑power modes (including deep power-down); exact voltage, timing, and max clock depend on the specific package and supply used.
- Packaging and use: commonly available in compact 8-pin packages suitable for MCUs; ideal for boot code storage, firmware updates, and data logging.
Note: exact electrical specs (voltage, clock speed, package type, and temperature range) vary by variant. Check the datasheet for the JMLE version to confirm specifications.
Key points
- Capacity and addressing: 16 Mbit of flash memory addressed via 3-byte addressing.
- Operations: supports page program, sector/block erase, and read operations; includes write-protect and security features.
- Interfaces: primary SPI interface with optional higher‑speed modes on supported variants.
- Power and timing: features low‑power modes (including deep power-down); exact voltage, timing, and max clock depend on the specific package and supply used.
- Packaging and use: commonly available in compact 8-pin packages suitable for MCUs; ideal for boot code storage, firmware updates, and data logging.
Note: exact electrical specs (voltage, clock speed, package type, and temperature range) vary by variant. Check the datasheet for the JMLE version to confirm specifications.
Features
IS25LP016D-JMLE is a 16‑Mbit serial NOR flash from ISSI. Key features:
- 16 Mbit serial flash memory; 2.7–3.6 V single-supply operation
- SPI interface with Standard SPI, Dual I/O and Quad I/O (QIO) modes (QPI support in some configs)
- Fast access: up to 104 MHz clock; fast read capability
- Page program: 256-byte pages
- Erase: 4 KB sectors; 64 KB blocks; full-chip erase
- Low-power modes: deep power-down and standby
- Protection/security: hardware write-protect, sector/block protection, security register
- Status/ready indicators and basic reliability features
- Package: 8‑pin (e.g., SOIC/8-pin package) with industrial temperature range
Use cases: code storage, boot firmware, microcontroller data/log storage.
- 16 Mbit serial flash memory; 2.7–3.6 V single-supply operation
- SPI interface with Standard SPI, Dual I/O and Quad I/O (QIO) modes (QPI support in some configs)
- Fast access: up to 104 MHz clock; fast read capability
- Page program: 256-byte pages
- Erase: 4 KB sectors; 64 KB blocks; full-chip erase
- Low-power modes: deep power-down and standby
- Protection/security: hardware write-protect, sector/block protection, security register
- Status/ready indicators and basic reliability features
- Package: 8‑pin (e.g., SOIC/8-pin package) with industrial temperature range
Use cases: code storage, boot firmware, microcontroller data/log storage.
Package
IS25LP016D-JMLE comes in an 8-pin SOP (SOIC) surface-mount package.
Pinout
- Pin count: 8 pins
- Function: 16 Mb serial SPI flash memory (IS25LP016D). Provides SPI interface for read/write of firmware/data; pins include CS, CLK, SI (MOSI), SO (MISO), HOLD, WP, plus VCC and GND.
- Function: 16 Mb serial SPI flash memory (IS25LP016D). Provides SPI interface for read/write of firmware/data; pins include CS, CLK, SI (MOSI), SO (MISO), HOLD, WP, plus VCC and GND.
Manufacturer
Manufacturer: Integrated Silicon Solution, Inc. (ISSI).
Type of company: ISSI is a fabless semiconductor company that designs and markets memory products (NOR flash, SRAM, DRAM) and relies on contract foundries for manufacturing.
Type of company: ISSI is a fabless semiconductor company that designs and markets memory products (NOR flash, SRAM, DRAM) and relies on contract foundries for manufacturing.
Equivalent
Common equivalents (16 Mbit SPI flash):
- Winbond W25Q16JV / W25Q16DV
- Macronix MX25L1606E
- GigaDevice GD25Q16C
- Puya P25Q16H
- Spansion S25FL016K
- Micron N25Q016A
- SST SST25VF016B
Note: cross-reference validity depends on voltage, timing, and package; verify against the IS25LP016D-JMLE datasheet for exact compatibility.
- Winbond W25Q16JV / W25Q16DV
- Macronix MX25L1606E
- GigaDevice GD25Q16C
- Puya P25Q16H
- Spansion S25FL016K
- Micron N25Q016A
- SST SST25VF016B
Note: cross-reference validity depends on voltage, timing, and package; verify against the IS25LP016D-JMLE datasheet for exact compatibility.
船舶
運輸管道我們
通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。
運費參攷(DHL/FedEx):
動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。
聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。
掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。
支付
Payment Methods
付款條件為100%預付。
現時,我們只接受以下付款方式:
1. 貝寶
2. 信用卡/借記卡
3. 電匯
類似的
-
MX25V1635FZNQ03
Macronix
-
MX25V16066M1I02
Macronix
-
MX25V16066M2I02
Macronix
-
MX30LF2G28AD-TI
Macronix
-
MX25L25673GMI-10G
Macronix
-
MX25L2006EM1I-12G
Macronix
-
MX25R1635FZUIH0
Macronix
-
MX25V1635FM2I
Macronix
-
MX25U3232FZBI02
Macronix
-
MX25L6433FM2I-08G
Macronix
-
MX25L12833FZNI-10..
Macronix
-
MX25U25645GXDI00
Macronix