圖片僅供參考

IRFP360

Name: IRFP360
Rating: 4.7 (12 reviews)

MOSFET N-CH 400V 23A TO247-3

製造商
製造商。部分 #IRFP360
包
資料表
有現貨的7123

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Supplier	Vishay Siliconix
Package	Tube
ProductStatus	Obsolete
FETType	N-Channel
Technology	MOSFET (Metal Oxide)
DraintoSourceVoltage(Vdss)	400 V
Current-ContinuousDrain(Id)@25°C	23A (Tc)
DriveVoltage(MaxRdsOnMinRdsOn)	10V
RdsOn(Max)@IdVgs	200mOhm @ 14A, 10V
Vgs(th)(Max)@Id	4V @ 250µA
GateCharge(Qg)(Max)@Vgs	210 nC @ 10 V
Vgs(Max)	±20V
InputCapacitance(Ciss)(Max)@Vds	4500 pF @ 25 V
PowerDissipation(Max)	280W (Tc)
OperatingTemperature	-55°C ~ 150°C (TJ)
MountingType	Through Hole
SupplierDevicePackage	TO-247AC

概述

Description

IRFP360 is a high-voltage N-channel power MOSFET from International Rectifier (now Infineon). It’s used in switching power supplies, inverters, and motor drives where a robust, fast-switching device is needed.
Key points:
- Type: N-channel enhancement-mode MOSFET.
- Rating focus: high drain–source voltage (around 200 V class) with a few amperes of continuous current depending on package and cooling.
- On-resistance: relatively low, but not a “logic-level” device; full enhancement typically requires ~10–12 V gate drive.
- Gate drive: avoid 5 V for full conduction; drive with proper gate drive circuitry and gate resistors.
- Packaging: common power packages such as TO-220 or similar D2PAK variants.
- Use notes: requires adequate heat sinking, and attention to SOA, avalanche, and protection (snubbers, flyback diodes, dead-time) in inductive loads.
For exact electrical ratings and package options, consult the official datasheet.

Features

Key features of IRFP360 (N‑channel power MOSFET):
- N‑channel enhancement‑mode power MOSFET
- VDS: 200 V
- Continuous ID: around 8 A (typical)
- RDS(on): typically under 1 Ω (roughly 0.8 Ω, max around 1.5 Ω)
- Gate drive: VGS(th) ~2–4 V; 10 V drive recommended for lowest RDS(on)
- Fast switching with low input capacitance and low Qg
- Robust avalanche energy rating for rugged switching
- Package: through‑hole TO‑220AB (also available in other variants)
- Wide operating temperature: typically −55 °C to +150 °C
- Applications: high‑voltage switching regulators, DC‑DC converters, motor control, inverters
Note: exact numbers can vary by lot and package variant; consult the datasheet for precise specifications.

Package

The IRFP360 is an N-channel power MOSFET typically supplied in a TO-220 (TO-220AB) three-lead through-hole power package. Check the manufacturer's datasheet for exact outlines and any variants.

Pinout

The IRFP360 is an N‑channel power MOSFET with 3 external pins. Their functions are:
- Pin 1: Gate (G) — control electrode that turns the MOSFET on/off.
- Pin 2: Drain (D) — power input/output; usually the center lead and the metal tab/heatsink are electrically tied to the drain.
- Pin 3: Source (S) — return/reference terminal for the device.
(Typical front-view pin order for TO‑247/TO‑220 packages: Gate, Drain, Source; metal tab = Drain.)

Manufacturer

The IRFP360 is an N‑channel power MOSFET originally manufactured by International Rectifier (IR). International Rectifier was an American semiconductor company specializing in power-management products and discrete power semiconductors (power MOSFETs, IGBTs, drivers). In 2015 IR was acquired by Infineon Technologies, a German semiconductor firm that now supplies many IR-branded power devices.

Application

IRFP360 is a high‑voltage N‑channel power MOSFET. Common application areas:
- Offline/high‑voltage switching power supplies (SMPS)
- DC–DC converters and regulator stages
- Power inverters and motor‑drive/PWM stages
- Solar/battery power conditioning and UPS systems
- Class D audio amplifiers and other high‑speed switching topologies
- Pulsed‑power, induction heating and related high‑voltage switching tasks

Equivalent

I can help, but need the IRFP360 specs you require (Vds, Id, Rds(on), package, switching speed, application). Provide those and I’ll list suitable equivalent MOSFET part numbers.