圖片僅供參考
HMC788ALP2E
IC RF AMP LTE 0HZ-10GHZ 6LFCSP
- 製造商
- 製造商。 部分 #HMC788ALP2E
- 包 6-VDFN Exposed Pad, CSP
- 資料表 HMC788ALP2E DataSheet
- 有現貨的6685
100%原創; 新
24小時準備發貨
365天保修
RFQ&; 獲得更多折扣
規格
| Package | Strip |
| ProductStatus | Active |
| Frequency | 0Hz ~ 10GHz |
| P1dB | 18dBm |
| Gain | 12dB |
| NoiseFigure | 7dB |
| RFType | LTE, WiMax |
| Voltage-Supply | 5V |
| Current-Supply | 76mA |
| TestFrequency | 6GHz ~ 10GHz |
| MountingType | Surface Mount |
| Package/Case | 6-VDFN Exposed Pad, CSP |
概述
Description
The HMC788ALP2E is a high-performance, gallium arsenide (GaAs) pHEMT (pseudomorphic high-electron-mobility transistor) low noise amplifier (LNA) designed for RF and microwave applications. It operates within a frequency range of 700 MHz to 1.5 GHz, making it suitable for cellular infrastructure, wireless communications, and other RF applications. The amplifier offers high gain, low noise figure, and good linearity, which are critical for enhancing signal quality in communication systems.
Packaged in a compact 2x2 mm leadless plastic package, the HMC788ALP2E is designed for ease of integration into a variety of printed circuit boards. Its low noise figure helps improve overall system sensitivity, while maintaining low power consumption. Additionally, it features an integrated power-down control pin, offering flexibility in managing power usage.
The device typically requires minimal external matching components, simplifying design and reducing overall system cost. Given its robust performance characteristics, the HMC788ALP2E is well-suited for use in base stations, repeaters, and other RF front-end applications where high efficiency and reliability are essential.
Packaged in a compact 2x2 mm leadless plastic package, the HMC788ALP2E is designed for ease of integration into a variety of printed circuit boards. Its low noise figure helps improve overall system sensitivity, while maintaining low power consumption. Additionally, it features an integrated power-down control pin, offering flexibility in managing power usage.
The device typically requires minimal external matching components, simplifying design and reducing overall system cost. Given its robust performance characteristics, the HMC788ALP2E is well-suited for use in base stations, repeaters, and other RF front-end applications where high efficiency and reliability are essential.
Features
The HMC788ALP2E is a high-performance GaAs MMIC low-noise amplifier designed for RF and microwave applications. Key features include:
1. Frequency Range: Operates from 0.1 GHz to 10 GHz, offering wide operational bandwidth for versatile applications.
2. Low Noise Figure: Delivers a low noise figure of typically 1.3 dB, enhancing signal quality and improving receiver sensitivity.
3. Gain: Provides a gain of approximately 16 dB, allowing for effective signal amplification.
4. Output Power: Capable of delivering an output power of up to 18 dBm at 1 dB compression point, suitable for a variety of RF applications.
5. VSWR: Exhibits good input and output VSWR, ensuring efficient power transfer and minimizing signal reflection.
6. Supply Voltage: Operates on a single supply voltage of +5V, simplifying power supply requirements.
7. Compact Package: Available in a 2x2 mm leadless QFN package, ideal for space-constrained designs.
8. Applications: Suitable for use in cellular/3G and LTE/WiMAX/4G, test equipment, and military ECM applications.
These features make the HMC788ALP2E an excellent choice for enhancing performance in RF front-end circuits.
1. Frequency Range: Operates from 0.1 GHz to 10 GHz, offering wide operational bandwidth for versatile applications.
2. Low Noise Figure: Delivers a low noise figure of typically 1.3 dB, enhancing signal quality and improving receiver sensitivity.
3. Gain: Provides a gain of approximately 16 dB, allowing for effective signal amplification.
4. Output Power: Capable of delivering an output power of up to 18 dBm at 1 dB compression point, suitable for a variety of RF applications.
5. VSWR: Exhibits good input and output VSWR, ensuring efficient power transfer and minimizing signal reflection.
6. Supply Voltage: Operates on a single supply voltage of +5V, simplifying power supply requirements.
7. Compact Package: Available in a 2x2 mm leadless QFN package, ideal for space-constrained designs.
8. Applications: Suitable for use in cellular/3G and LTE/WiMAX/4G, test equipment, and military ECM applications.
These features make the HMC788ALP2E an excellent choice for enhancing performance in RF front-end circuits.
Package
The HMC788ALP2E is housed in a 2mm x 2mm, 8-lead leadless plastic package (LP2). This compact package type is designed for surface-mount technology, offering ease of integration into various RF and microwave applications.
Pinout
The HMC788ALP2E is a low noise amplifier (LNA) designed for RF and microwave applications. It comes in a 2 mm x 2 mm leadless QFN package with a 6-pin configuration. Here's a brief overview of its pin functions:
1. RF Input (Pin 1): Receives the RF input signal.
2. GND (Pin 2): Ground pin, connected to the ground plane of the PCB.
3. Vdd (Pin 3): Supply voltage pin, typically connected to a positive DC voltage for biasing the amplifier.
4. GND (Pin 4): Another ground pin similar to Pin 2, used for grounding purposes.
5. RF Output / Vdd (Pin 5): Combined RF output and DC supply pin. The RF output signal is taken from this pin, and it also provides DC supply to the amplifier.
6. GND (Pin 6): Additional ground pin for better grounding and stability.
These pins are collectively designed to support the amplifier's operation, providing the necessary connections for power, ground, and input/output signal paths.
1. RF Input (Pin 1): Receives the RF input signal.
2. GND (Pin 2): Ground pin, connected to the ground plane of the PCB.
3. Vdd (Pin 3): Supply voltage pin, typically connected to a positive DC voltage for biasing the amplifier.
4. GND (Pin 4): Another ground pin similar to Pin 2, used for grounding purposes.
5. RF Output / Vdd (Pin 5): Combined RF output and DC supply pin. The RF output signal is taken from this pin, and it also provides DC supply to the amplifier.
6. GND (Pin 6): Additional ground pin for better grounding and stability.
These pins are collectively designed to support the amplifier's operation, providing the necessary connections for power, ground, and input/output signal paths.
Manufacturer
The HMC788ALP2E is manufactured by Analog Devices, Inc. Analog Devices is a multinational semiconductor company that specializes in the design and manufacturing of analog, mixed-signal, and digital signal processing (DSP) integrated circuits. The company provides solutions for various industries, including communications, automotive, healthcare, and industrial equipment. Analog Devices is known for its focus on innovation and high-performance products, offering a wide range of components used in electronic systems.
Application
The HMC788ALP2E is a high-isolation, low-loss SPDT (Single Pole Double Throw) switch designed for RF and microwave applications. It is commonly used in communication systems, radar, test equipment, and signal routing applications due to its broad frequency range (DC to 6 GHz) and high performance. Its compact package and robust design make it suitable for use in mobile devices, infrastructure, wireless LANs, and other RF applications requiring precise and reliable signal control.
Equivalent
The HMC788ALP2E is a low noise amplifier (LNA) designed by Analog Devices. Equivalent products to consider might include:
1. Qorvo TQP3M9008
2. Skyworks SKY67151-396LF
3. Broadcom MGA-30689
4. Mini-Circuits LEE-39+
These alternatives offer similar functionalities but specific performance metrics and specifications should be compared to ensure suitability for your application. Always verify compatibility with your circuit requirements.
1. Qorvo TQP3M9008
2. Skyworks SKY67151-396LF
3. Broadcom MGA-30689
4. Mini-Circuits LEE-39+
These alternatives offer similar functionalities but specific performance metrics and specifications should be compared to ensure suitability for your application. Always verify compatibility with your circuit requirements.
船舶
運輸管道我們
通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。
運費參攷(DHL/FedEx):
動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。
聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。
掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。
支付
Payment Methods
付款條件為100%預付。
現時,我們只接受以下付款方式:
1. 貝寶
2. 信用卡/借記卡
3. 電匯
類似的
-
MX25R8035FM1IL0
Macronix
-
MX25L3233FZBI-08Q
Macronix
-
MX25L3233FM1I-08Q
Macronix
-
MX66U1G45GXDI00
Macronix
-
MX25V2033FM1I
Macronix
-
MX25R3235FZNIL0
Macronix
-
MX25L8035EM2I-10G
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX29GL512FHXFI-11..
Macronix
-
MX25L2006EM1I-12G
Macronix
-
MX25U3232FZBI02
Macronix
-
MX25L12833FM2I-10..
Macronix