圖片僅供參考

HCPL-070A-500E

Name: HCPL-070A-500E
Rating: 4.7 (12 reviews)

OPTOISO 3.75KV DARL W/BASE 8-SO

製造商
製造商。部分 #HCPL-070A-500E
包
資料表
有現貨的3359

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Part Status	Active
Number of Channels	1
Voltage - Isolation	3750Vrms
Current Transfer Ratio (Min)	600% @ 500µA
Current Transfer Ratio (Max)	8000% @ 500µA
Turn On / Turn Off Time (Typ)	3µs, 34µs
Input Type	DC
Output Type	Darlington with Base
Voltage - Output (Max)	18V
Current - Output / Channel	60mA
Voltage - Forward (Vf) (Typ)	1.25V
Current - DC Forward (If) (Max)	5 mA
Operating Temperature	0°C ~ 70°C
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package	8-SO
Base Product Number	HCPL-070

概述

Description

The HCPL-070A-500E is an optocoupler, specifically a high-speed, high-voltage isolation device produced by Broadcom. It features a photodiode and a phototransistor integrated into a single package, allowing for efficient signal transmission while providing electrical isolation between input and output circuits. This component is designed for applications requiring high-speed data communication and safety isolation, such as in industrial controls, power supplies, and communication systems.
Key specifications include a data rate of up to 1 Mbps, a high common mode transient immunity (CMTI) of 50 kV/µs, and an isolation voltage rating of 5000 Vrms. The device operates over a wide temperature range, ensuring reliability in diverse environments. Its compact design and robust performance make it suitable for various electronic applications where signal integrity and safety are paramount.

Features

The HCPL-070A-500E is an analog optocoupler designed for high-performance applications. Key features include:
1. High Speed: It offers a typical propagation delay of 19 µs, making it suitable for fast data transmission.
2. Isolation Voltage: It provides a high isolation voltage of 5000 Vrms, ensuring safe operation across different circuits.
3. Wide Operating Temperature Range: The device operates effectively from -40°C to +100°C, accommodating various environmental conditions.
4. Low Input Current: It requires a low input current for operation, enhancing efficiency and reducing power consumption.
5. Linear Transfer Characteristics: The optocoupler features a linear transfer function, making it ideal for analog signal transmissions.
6. Package Type: It comes in a compact 8-pin DIP package, facilitating easy integration into space-constrained designs.
These features make the HCPL-070A-500E suitable for applications in industrial automation, motor control, and signal isolation.

Package

The HCPL-070A-500E is housed in a 6-pin dual in-line package (DIP). This package type is designed for through-hole mounting and provides robust connectivity and ease of handling for various electronic applications.

Pinout

The HCPL-070A-500E is an optocoupler with a total of 8 pins. Its primary function is to provide electrical isolation between the input and output while allowing signal transmission, typically used for switching and control applications. The device features a phototransistor output, which is activated by an infrared LED input.
Pin configuration:
1. Anode of LED (Input)
2. Cathode of LED (Input)
3. Emitter of Phototransistor (Output)
4. Collector of Phototransistor (Output)
5. Not connected (NC)
6. Not connected (NC)
7. Vcc (Positive supply for output)
8. GND (Ground)
The HCPL-070A-500E is known for its high-speed operation, making it suitable for digital signal applications that require isolation and noise immunity.

Manufacturer

The HCPL-070A-500E is manufactured by Broadcom Inc., specifically under its Avago Technologies division. Broadcom is a multinational corporation that designs, develops, and supplies a broad range of semiconductor and infrastructure software solutions. The company serves various markets, including data center, networking, software, broadband, wireless, and storage. Broadcom is known for its innovation in technology and products, focusing on high-performance solutions that enhance connectivity, processing capabilities, and data handling across different applications.

Application

The HCPL-070A-500E is an optocoupler designed for high-speed data communication applications. It is commonly used in isolated data links, signal isolation in microcontroller interfaces, and industrial automation systems. Additionally, it is suitable for communications in telecommunications, motor control, and power supply regulation, providing electrical isolation and noise immunity in various electronic circuits.