圖片僅供參考

GD25VQ40CEIGR

Name: GD25VQ40CEIGR
Rating: 4.7 (12 reviews)

IC FLASH 4MBIT SPI/QUAD 8USON

製造商
製造商。部分 #GD25VQ40CEIGR
包 8-XFDFN Exposed Pad
資料表
有現貨的3954

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Package	Tape & Reel (TR)
ProductStatus	Active
MemoryType	Non-Volatile
MemoryFormat	FLASH
Technology	FLASH - NOR
MemorySize	4Mb (512K x 8)
MemoryInterface	SPI - Quad I/O
ClockFrequency	104 MHz
WriteCycleTime-WordPage	50µs, 3ms
Voltage-Supply	2.3V ~ 3.6V
OperatingTemperature	-40°C ~ 85°C (TA)
MountingType	Surface Mount
Package/Case	8-XFDFN Exposed Pad

概述

Description

GD25VQ40CEIGR is a 4‑Mbit serial flash memory from GigaDevice. It uses SPI-compatible interfaces (Standard SPI, Dual SPI, and Quad SPI) for high-throughput data access. Key points:
- Capacity: 4 Mbit (512 KB)
- Interface: Single, Dual, and Quad I/O SPI
- Voltage: 2.7–3.6 V (3.3 V typical)
- Package: 8-pin, RoHS-compliant
- Performance: fast read up to about 104 MHz; supports 256-byte page programming, 4 KB sectors, 32 KB/64 KB blocks, and chip erase
- Features: Write Enable/Protect mechanisms, status register, and sector/block protection
- Applications: firmware storage and boot code, code shadowing, and other embedded storage needs
In short, GD25VQ40CEIGR is a compact, versatile SPI flash suitable for bootloaders and firmware storage in microcontroller-based designs. If you need exact timing, voltage tolerances, and package details, consult the official datasheet.

Features

Here are the key features of GD25VQ40CEIGR (concise):
- Capacity: 40 Mbit (5 MB) serial flash.
- Interface: SPI with Dual/Quad I/O modes (DQIO/QPI-capable in many GD devices). JEDEC standard.
- Voltage and temp: 2.7–3.6 V operation; Industrial grade option typical (-40°C to +85°C).
- Memory organization: 256‑byte page; 4 KB sectors; 64 KB blocks.
- Performance: Fast read up to 104 MHz SPI; Quad I/O read speeds supported; ~5 µs typical page program time.
- Endurance/retention: ~100k program/erase cycles; data retention typically ~20 years.
- Power/security: Deep power-down; hardware WP# and HOLD# pins; software data protection and block protection; OTP area available.
- Packaging: RoHS-compliant 8‑pin package (IGR suffix indicates packaging/grade).
- Applications: Firmware storage/boot flash, code execution, microcontroller support.
Note: Exact timing and feature set can vary by revision; consult the latest datasheet for precise figures.

Package

It comes in an 8-pin SOIC/SOP package (8-pin SOP).

Pinout

- Pin count: 8 pins (SOIC-8 / SOP-8 package)
- Function: Serial NOR flash memory (non-volatile storage) with SPI/Quad I/O interface. Typical pins: CS, CLK, DI (MOSI), DO (MISO), WP, HOLD, VCC, GND. Used to store firmware/data.

Manufacturer

- Manufacturer: GigaDevice Semiconductor Inc. (GigaDevice)
- What kind of company: A Chinese semiconductor company that designs and markets flash memory ICs (serial NOR/NAND flash) and related storage solutions.

Application

Applications of GD25VQ40CEIGR include:
- MCU boot firmware storage and firmware updates
- Code and data storage in embedded systems
- Data logging and configuration storage for IoT, wearables, sensors
- Peripheral controllers in consumer electronics (set-top boxes, audio devices)
- Automotive ECUs and gateway devices (non-volatile firmware storage)
- Industrial control, smart meters and other embedded equipment

Equivalent

Equivalents (4 Mbit SPI NOR flash, 3.3V): Winbond W25Q40BV, Macronix MX25L4006E, Micron N25Q040A, Spansion/Cypress S25FL040, ISSI IS25LP040D. Check pinout, timing, and Quad/dual I/O support in datasheets for true compatibility.