圖片僅供參考
GD25Q16CSIGR
IC FLASH 16MBIT SPI/QUAD 8SOP
- 製造商
- 製造商。 部分 #GD25Q16CSIGR
- 包 8-SOIC (0.209, 5.30mm Width)
- 資料表
- 有現貨的6083
100%原創; 新
24小時準備發貨
365天保修
RFQ&; 獲得更多折扣
規格
| Package | Tape & Reel (TR),Cut Tape (CT) |
| ProductStatus | Not For New Designs |
| MemoryType | Non-Volatile |
| MemoryFormat | FLASH |
| Technology | FLASH - NOR |
| MemorySize | 16Mb (2M x 8) |
| MemoryInterface | SPI - Quad I/O |
| ClockFrequency | 120 MHz |
| WriteCycleTime-WordPage | 50µs, 2.4ms |
| Voltage-Supply | 2.7V ~ 3.6V |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.209, 5.30mm Width) |
概述
Description
The GD25Q16CSIGR is a 16 Megabit (2 Megabyte) Serial NOR Flash memory chip manufactured by GigaDevice. It employs a Quad SPI (Serial Peripheral Interface) architecture, allowing for high-speed data transfer rates, typically reaching up to 104 MHz. This chip is designed for applications that require non-volatile storage, such as firmware, configuration data, and system boot code in embedded systems.
Key features include:
- Memory Density: 16Mb (2MB)
- Interface: Quad SPI, supporting single, dual, and quad I/O modes.
- Voltage Range: Operates typically at 3.0V to 3.6V, making it suitable for various electronic applications.
- Endurance: Typically rated for around 100,000 program/erase cycles.
- Data Retention: Typically up to 20 years.
The GD25Q16CSIGR is widely used in applications such as consumer electronics, automotive, industrial devices, and IoT products due to its reliability and performance.
Key features include:
- Memory Density: 16Mb (2MB)
- Interface: Quad SPI, supporting single, dual, and quad I/O modes.
- Voltage Range: Operates typically at 3.0V to 3.6V, making it suitable for various electronic applications.
- Endurance: Typically rated for around 100,000 program/erase cycles.
- Data Retention: Typically up to 20 years.
The GD25Q16CSIGR is widely used in applications such as consumer electronics, automotive, industrial devices, and IoT products due to its reliability and performance.
Features
The GD25Q16CSIGR is a 16Mb (2MB) Serial NOR Flash memory from GigaDevice, featuring a Quad-SPI interface for high-speed data transfer. Key features include:
1. Storage Capacity: 16Mb (2MB).
2. Interface: Supports SPI and Quad-SPI modes, enabling faster read speeds.
3. Read Speed: Up to 104MHz in Quad-SPI mode.
4. Voltage Range: Operates between 2.7V to 3.6V, with low power consumption.
5. Program/Erase Cycles: Supports a minimum of 100,000 program/erase cycles.
6. Data Retention: Retains data for more than 20 years at 25°C.
7. Package Options: Available in various packages including SOIC, WSON, and UFDFPN.
8. Security Features: Includes a 64-bit unique ID and supports hardware write protection.
These attributes make the GD25Q16CSIGR suitable for a variety of applications, including embedded systems, consumer electronics, and automotive devices.
1. Storage Capacity: 16Mb (2MB).
2. Interface: Supports SPI and Quad-SPI modes, enabling faster read speeds.
3. Read Speed: Up to 104MHz in Quad-SPI mode.
4. Voltage Range: Operates between 2.7V to 3.6V, with low power consumption.
5. Program/Erase Cycles: Supports a minimum of 100,000 program/erase cycles.
6. Data Retention: Retains data for more than 20 years at 25°C.
7. Package Options: Available in various packages including SOIC, WSON, and UFDFPN.
8. Security Features: Includes a 64-bit unique ID and supports hardware write protection.
These attributes make the GD25Q16CSIGR suitable for a variety of applications, including embedded systems, consumer electronics, and automotive devices.
Package
The GD25Q16CSIGR is packaged in a SOIC-8 (Small Outline Integrated Circuit, 8-pin) configuration. This package type is commonly used for surface-mount technology (SMT) applications, allowing for efficient space utilization on printed circuit boards.
Pinout
The GD25Q16CSIGR is a 16 Mb (2 MB) serial NOR Flash memory chip with a total of 8 pins. Here’s a brief overview of the pin functions:
1. VCC: Power supply pin (typically 2.7V to 3.6V).
2. GND: Ground pin.
3. SO (Serial Output): Data output pin for serial communication.
4. SI (Serial Input): Data input pin for serial communication.
5. SCK (Serial Clock): Clock signal pin used to synchronize data transmission.
6. CS (Chip Select): Active low pin used to select the device when communicating.
7. WP (Write Protect): Pin used to protect the memory from unwanted write operations.
8. HOLD: Pin used to pause the serial communication without resetting the device.
This chip supports various modes of operation, including Quad-SPI, and is commonly used in applications requiring non-volatile memory storage.
1. VCC: Power supply pin (typically 2.7V to 3.6V).
2. GND: Ground pin.
3. SO (Serial Output): Data output pin for serial communication.
4. SI (Serial Input): Data input pin for serial communication.
5. SCK (Serial Clock): Clock signal pin used to synchronize data transmission.
6. CS (Chip Select): Active low pin used to select the device when communicating.
7. WP (Write Protect): Pin used to protect the memory from unwanted write operations.
8. HOLD: Pin used to pause the serial communication without resetting the device.
This chip supports various modes of operation, including Quad-SPI, and is commonly used in applications requiring non-volatile memory storage.
Manufacturer
The GD25Q16CSIGR is manufactured by GigaDevice Semiconductor Inc., a company based in China. GigaDevice specializes in the design and production of memory and microcontroller products, particularly flash memory and NOR flash devices. Established in 2005, GigaDevice has become a significant player in the semiconductor industry, focusing on providing high-performance and cost-effective solutions for various applications, including consumer electronics, automotive, industrial, and communications. The GD25Q16CSIGR, specifically, is a 16 megabit (2 MB) serial NOR flash memory device commonly used in applications requiring non-volatile storage.
Application
The GD25Q16CSIGR is a serial NOR Flash memory chip commonly used in various applications, including embedded systems, automotive electronics, consumer electronics, and IoT devices. It serves as a storage solution for firmware, boot code, and data logging. Its fast read speeds and low power consumption make it suitable for applications requiring quick access to stored information, such as in smartphones, tablets, and industrial automation systems.
Equivalent
The GD25Q16CSIGR chip is a 16Mb (2MB) SPI NOR Flash memory. Equivalent products include the Winbond W25Q16JV, Micron MT25QL128, and the Adesto AT25DF161. These alternatives also offer similar specifications like storage capacity, interface, and performance characteristics.
船舶
運輸管道我們
通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。
運費參攷(DHL/FedEx):
動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。
聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。
掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。
支付
Payment Methods
付款條件為100%預付。
現時,我們只接受以下付款方式:
1. 貝寶
2. 信用卡/借記卡
3. 電匯
類似的
-
MX25L3233FM1I-08Q
Macronix
-
MX25V1635FZNI
Macronix
-
MX25V4035FZUI
Macronix
-
MX25V16066M2I02
Macronix
-
MX30LF2G28AD-TI
Macronix
-
MX25L8035EM2I-10G
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX25L25673GMI-10G
Macronix
-
MX25U25643GZNI00
Macronix
-
MX25V1635FM2I
Macronix
-
MX25L6433FM2I-08G
Macronix
-
MX25L12833FZ2I-10..
Macronix