圖片僅供參考

GD25LB256EYIGR

Name: GD25LB256EYIGR
Rating: 4.7 (12 reviews)

IC FLASH 256MBIT SPI/QUAD 8WSON

製造商
製造商。部分 #GD25LB256EYIGR
包
資料表
有現貨的25510

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Series	GD25LB
Part Status	Active
Base Product Number	GD25LB256
Memory Type	Non-Volatile
Memory Format	FLASH
Technology	FLASH - NOR (SLC)
Memory Size	256Mbit
Memory Organization	32M x 8
Memory Interface	SPI - Quad I/O, QPI, DTR
Clock Frequency	166 MHz
Write Cycle Time - Word, Page	70µs, 1.2ms
Voltage - Supply	1.65V ~ 2V
Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount
Package	8-WDFN Exposed Pad
Supplier Device Package	8-WSON (6x8)
Packaging	Tape & Reel (TR)
Access Time	6 ns

概述

Description

GD25LB256EYIGR is a 256‑Mbit serial NOR flash memory from GigaDevice (GD25LB256E family). It provides non‑volatile storage for firmware and data in embedded systems and is accessed via an SPI‑compatible interface. The device supports standard SPI and higher‑speed modes (dual/quad I/O in some configurations) and uses 4‑byte addressing to reach the full memory array. Typical flash operations include read/fast read, page programming, and sector/block erases, with security features such as write protection and status registers. The YIGR suffix denotes the specific package and temperature/ RoHS grade per GigaDevice’s naming conventions (e.g., an 8‑pin package with a defined temperature range). Common applications are microcontroller boot code storage, firmware updates, configuration data storage, and data logging in both consumer and industrial products.

Features

Key features of GD25LB256EYIGR:
- 256-Mbit serial flash memory (32 MB) with SPI-compatible interface
- Low-voltage operation: 2.7 V to 3.6 V
- Read modes: Standard, Fast, Dual I/O, and Quad I/O
- High-speed reads up to 104 MHz
- Write: 256-byte pages
- Erase: 4 KB sectors; larger blocks (64 KB and 256 KB)
- Power modes: Deep power-down and standby
- Protection: Hardware and software write protection; status register and memory protection features; WP# and HOLD# pins
- Endurance/retention: Typical 100k P/E cycles; data retention ~20 years
- Operating temperature: -40 °C to +85 °C (industrial)
- Packaging: 8-pin package (RoHS compliant)
Ideal for code boot/loading, firmware storage, and data logging in space- and power-constrained designs.

Package

GD25LB256EYIGR is an 8‑pin SOP (SOP‑8) serial flash package.

Pinout

- Pin count: 8 pins (8-pin package, e.g., SOP-8).
- Function: 256-Mbit serial NOR flash memory with SPI interface (non-volatile storage for firmware/data). Pinout: CS, CLK, DI (MOSI), DO (MISO), WP#, HOLD#, VCC, GND. Supports standard SPI operations (read/fast read, page program, sector/chip erase) with write/protect and hold features.

Manufacturer

- Manufacturer: GigaDevice Semiconductor Inc. (GD).
- What kind of company: A Chinese fabless semiconductor company that designs and markets non-volatile memory (SPI/NOR flash) and microcontroller solutions, outsourcing fabrication to foundries.

Application

GD25LB256EYIGR is a 256-Mbit serial flash memory. Common applications include:
- External program/firmware storage and XIP for microcontrollers/SoCs
- Boot memory for embedded systems
- Data logging and configuration storage
- Firmware/software updates and recovery images
- External flash for IoT devices and consumer electronics (set-top boxes, TVs, cameras, printers)
- Industrial control systems and networking equipment

Equivalent

GD25LB256EYIGR is a 256-Mbit serial SPI NOR flash from GigaDevice. Common cross‑references (equivalents) include:
- Winbond W25Q256JV (W25Q256 family)
- Macronix MX25L25645G
- Spansion/Cypress S25FL256S
- ISSI IS25LP256D
Check exact voltage, package, and timing specs for your design, as there are feature variations among devices.