圖片僅供參考

GD25D10CEIGR

Name: GD25D10CEIGR
Rating: 4.7 (12 reviews)

IC FLASH 1MBIT SPI/DUAL 8USON

製造商
製造商。部分 #GD25D10CEIGR
包 8-XFDFN Exposed Pad
資料表
有現貨的9581

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Supplier	GigaDevice Semiconductor (HK) Limited
Package	Tape & Reel (TR),Cut Tape (CT)
ProductStatus	Active
MemoryType	Non-Volatile
MemoryFormat	FLASH
Technology	FLASH - NOR
MemorySize	1Mb (128K x 8)
MemoryInterface	SPI - Dual I/O
ClockFrequency	100 MHz
WriteCycleTime-WordPage	50µs, 4ms
Voltage-Supply	2.7V ~ 3.6V
OperatingTemperature	-40°C ~ 85°C (TA)
MountingType	Surface Mount
Package/Case	8-XFDFN Exposed Pad

概述

Description

GD25D10CEIGR is a 1 Mbit serial SPI flash memory from GigaDevice (GD25D10C family). It provides non-volatile storage (128 KB) accessible over an SPI bus with 3‑byte addressing. Key features: Vcc usually 2.7–3.6 V; SPI interface; 256‑byte page size; sectors of 4 KB; supports Read/ Fast Read, Page Program (256 B), Sector Erase, Chip Erase; Deep Power-Down and Hold/WP protections. Endurance typically in the 10^4–10^5 program/erase cycles range with data retention around two decades. It comes in an 8‑pin SPI package (e.g., SOP8/SOIC8). Applications include bootloaders, firmware or data storage for microcontrollers, and small embedded storage needs. For exact timing, clock rate (often tens of MHz), command set, and pinout, consult the GD25D10C datasheet for the EIGR variant.

Features

Key features of GD25D10CEIGR:
- 1 Mbit (128 Kbytes) serial flash memory
- SPI-compatible serial interface (standard read; fast-read mode)
- Operating voltage: 2.7–3.6 V
- Page size: 256 bytes
- Erase architecture: 4 KB sectors; larger blocks (e.g., 64 KB) and chip erase
- Endurance: typically up to 100,000 P/E cycles
- Data retention: ~20 years
- Low-power modes: deep power-down and standby
- Security/protection: hardware write protection and status register features
- Temperature range: industrial -40°C to 85°C
- Package: 8-pin small-outline (SOP/USON) with RoHS-compliant routing
- Applications: code storage/boot load, small firmware storage, data logging
Note: Always verify exact timing, read speeds, and block sizes in the datasheet for your specific revision.

Package

8-pin SOP (SOIC-8) package; RoHS-compliant.

Pinout

- Pin count: 8 pins (SOP-8/8-pin package, RoHS).
- Function: 1 Mbit serial SPI flash memory (GD25D10C). Interfaces via CS, CLK, DI (SI), DO (SO), WP, HOLD, VCC, GND; supports standard flash operations (Read, Fast Read, Page Program, Sector/Chip Erase) for storing firmware/data.

Manufacturer

- Manufacturer: GigaDevice Semiconductor (Beijing) Co., Ltd. (GigaDevice)
- What kind of company: A Chinese fabless semiconductor company specializing in non-volatile memory products, especially NOR/serial flash memory and related ICs.

Application

Applications of GD25D10CEIGR:
- Firmware storage and bootloader for microcontrollers/SoCs
- Code and data storage for embedded systems (IoT, wearables, consumer electronics)
- Firmware updates and removable storage for development boards
- Data logging and calibration/configuration storage in sensors, industrial equipment, and automotive
- Look-up tables, parameters, and small datasets requiring nonvolatile memory

Equivalent

GD25D10CEIGR is a 1 Mbit (128 KB) serial SPI flash. Common cross equivalents:
- Winbond W25Q10BV/W25Q10DV
- Macronix MX25L1006E
- ISSI IS25LP010
- Spansion S25FL010K
- EON EN25Q10
Note: check voltage (2.7–3.6V), package, timing, and command compatibility with datasheets.