FS32K118LAT0VLHR

圖片僅供參考

FS32K118LAT0VLHR

IC MCU 32BIT 256KB FLASH 64LQFP

  • 製造商
  • 製造商。 部分 #FS32K118LAT0VLHR
  • 包 64-LQFP
  • 資料表
  • 有現貨的5432

100%原創; 新

24小時準備發貨

365天保修

RFQ&; 獲得更多折扣

規格

Supplier NXP USA Inc.
Package Tape & Reel (TR)
Series S32K
ProductStatus Active
CoreProcessor ARM® Cortex®-M0+
CoreSize 32-Bit Single-Core
Speed 48MHz
Connectivity CANbus, FlexIO, I²C, LINbus, SPI, UART/USART
Peripherals DMA, PWM, WDT
NumberofI/O 58
ProgramMemorySize 256KB (256K x 8)
ProgramMemoryType FLASH
EEPROMSize 2K x 8
RAMSize 25K x 8
Voltage-Supply(Vcc/Vdd) 2.7V ~ 5.5V
DataConverters A/D 16x12b SAR; D/A1x8b
OscillatorType Internal
OperatingTemperature -40°C ~ 105°C (TA)
MountingType Surface Mount
Package/Case 64-LQFP

概述

Description

FS32K118LAT0VLHR is an automotive-grade 32‑bit MCU from NXP’s S32K1 family. It targets safety‑critical body and gateway applications in modern vehicles. The device combines a 32‑bit Arm Cortex core with a rich set of peripherals, including CAN/CAN‑FD, LIN, Ethernet, USB, multiple UART/SPI/I2C, ADCs, DACs, PWM and timers. It offers memory protection and ECC, CRC checks, and watchdogs to support ISO 26262 ASIL‑D workflows. Optional security features (e.g., cryptography accelerators) vary by variant. Development is supported by NXP tools (S32 Design Studio, MCUXpresso) and software stacks (AUTOSAR, FreeRTOS, etc.). The LAT0VLHR suffix encodes a specific package type and temperature grade; consult the datasheet for exact pinout, voltage, speed, and memory configuration. Typical applications include body electronics, gateways, instrument clusters, and powertrain domain controllers in automotive systems.

Features

FS32K118LAT0VLHR is an automotive-grade microcontroller from the S32K1 family based on the ARM Cortex-M4F core. Key features:
- CPU: ARM Cortex-M4F with DSP instructions and FPU
- Speed: up to about 120 MHz
- Memory: on-chip Flash and RAM with ECC; built-in boot/repair ROM
- Safety/Security: memory protection unit, ECC/CRC engines, secure boot
- Peripherals: CAN FD (FlexCAN), LIN, UART, SPI, I2C; DMA
- Analog/Timing: multiple 12-bit ADCs, comparators; FlexTimer/PWM modules
- Power: multiple low-power modes and wakeup sources
- Debug/Trace: JTAG/SWD with on-chip trace support
Optional packaging/power-domain specifics may vary, but features above cover the core capabilities of FS32K118LAT0VLHR.

Package

LQFP (Low-Profile Quad Flat Package), very-low height variant, RoHS-compliant.

Pinout

- Pin count: 176 pins (LQFP176)
- Function: 32-bit automotive microcontroller (S32K118) based on an ARM Cortex-M4F core, with integrated peripherals (CAN/FlexCAN, ADC, DAC, timers, PWM, and various communication interfaces) for automotive applications.

Manufacturer

Manufacturer: NXP Semiconductors (formerly Freescale Semiconductor).
About the company: NXP is a Dutch multinational technology company that designs and manufactures semiconductors and integrated circuits, including automotive microcontrollers and secure connectivity solutions for automotive, industrial, and consumer markets.

Application

- Automotive body/chassis electronics
- Powertrain and motor control
- In-vehicle gateway/domain controllers and networked ECUs
- Safety-critical (ASIL-rated) control systems
- Industrial automation and robotics requiring high reliability

Equivalent

Exact cross-references depend on the supplier. FS32K118LAT0VLHR is a member of the FS32K118 family; the closest equivalents are other FS32K118 variants (same CPU/core) with different packaging/temperature grades and the NXP S32K118 in a similar package. For a precise cross-reference list across vendors, specify your target package/temperature and supplier (e.g., Digi‑Key, Mouser), and I’ll provide the exact equivalents.

船舶

運輸管道我們

通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。


運費參攷(DHL/FedEx):

動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。

聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。

掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。

支付

Payment Methods

付款條件為100%預付。

現時,我們只接受以下付款方式:

1. 貝寶

2. 信用卡/借記卡

3. 電匯