EPM7256AETC100-10

圖片僅供參考

EPM7256AETC100-10

IC CPLD 256MC 10NS 100TQFP

  • 製造商
  • 製造商。 部分 #EPM7256AETC100-10
  • 包 100-TQFP
  • 資料表
  • 有現貨的2442

100%原創; 新

24小時準備發貨

365天保修

RFQ&; 獲得更多折扣

規格

Supplier Intel
Package Tray
Series MAX® 7000A
ProductStatus Obsolete
ProgrammableType In System Programmable
DelayTimetpd(1)Max 10 ns
VoltageSupply-Internal 3V ~ 3.6V
NumberofLogicElements/Blocks 16
NumberofMacrocells 256
NumberofGates 5000
NumberofI/O 84
OperatingTemperature 0°C ~ 70°C (TA)
MountingType Surface Mount
Package/Case 100-TQFP

概述

Description

Introduction to EPM7256AETC100-10:
- Type: Altera/Intel EPLD (EPM7256A family), a small, reprogrammable logic device.
- Key specs: 256 macrocells, 100-pin TQFP package (ETC), 3.3V operation, speed grade -10 (slower end of the range).
- Purpose: implement glue logic, simple state machines, decoders, counters, and interface logic between components.
- Programming: configured with Altera/Intel tools (Quartus II or older MAX+PLUS II) using programmers such as ByteBlaster or USB-Blaster; in-system/in-circuit programming may be supported via JTAG/AS interfaces on board.
- Notes: older/legacy device family; tool support and availability may be limited compared to modern devices. Suitable for retro designs or educational projects needing small, custom logic.

Features

Here are the main features of the EPM7256AETC100-10 (MAX II CPLD):
- High-density CPLD in 100-pin TQFP package, part number EPM7256AETC100-10
- 256 macrocell-based logic fabric for flexible, low-cost digital design
- On-chip non-volatile configuration memory (FPROM) for in-system reconfigurability; supports serial configuration (FPS/Active Serial) with no external config memory needed
- Flexible I/O banks capable of supporting standard CPLD I/O levels (typical 3.3V and 2.5V signaling; some pins 5V-tolerant depending on bank)
- JTAG boundary-scan for programming and debugging
- In-system programmable and reconfigurable design flow using standard tools (Quartus II/Intel design software)
- Low power consumption and small form factor suitable for space- and cost-constrained designs
- General-purpose registers, combinational logic, simple state machines, and routing resources for rapid prototyping
Note: Exact I/O counts per bank and voltage/tolerance specifics depend on the device’s bank configuration; consult the datasheet for precise electrical characteristics.

Package

It uses a 100-pin TQFP (Thin Quad Flat Pack) package.

Pinout

- Pin count: 100 pins (TQFP-100)
- Function: Altera MAX 7000A family 256-macrocell EPLD/CPLD device for implementing general digital logic (glue logic, etc.).

Manufacturer

- Manufacturer: Altera Corporation (now part of Intel Corporation).
- Company type: Semiconductor company specializing in programmable logic devices (PLDs), including EPLDs/CPLDs and FPGAs.

Application

Typical applications for the EPM7256AETC100-10 CPLD include:
- Glue logic for microprocessors/ASICs (address decoding, bus interfacing)
- Simple state machines and control logic
- I/O expansion and peripheral interfaces (LEDs, displays, GPIO)
- Timing utilities: counters, timers, PWM
- Clock-domain crossing and timing alignment
- Prototyping, development boards, and educational projects

船舶

運輸管道我們

通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。


運費參攷(DHL/FedEx):

動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。

聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。

掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。

支付

Payment Methods

付款條件為100%預付。

現時,我們只接受以下付款方式:

1. 貝寶

2. 信用卡/借記卡

3. 電匯