圖片僅供參考

DRV2605LTDGSRQ1

Name: DRV2605LTDGSRQ1
Rating: 4.7 (12 reviews)

IC MOTOR DRIVER 2V-5.2V 10VSSOP

製造商
製造商。部分 #DRV2605LTDGSRQ1
包 VSSOP (DGS)-10
資料表
有現貨的7076

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Package	Tape & Reel (TR),Cut Tape (CT),Bulk
Series	Automotive, AEC-Q100
ProductStatus	Active
MotorType-ACDC	ERM, LRA
Function	Driver - Fully Integrated, Control and Power Stage
OutputConfiguration	Half Bridge (2)
Interface	I²C
Technology	Power MOSFET
Applications	Haptic Feedback
Voltage-Supply	2V ~ 5.2V
Voltage-Load	2V ~ 5.2V
OperatingTemperature	-40°C ~ 150°C (TJ)
MountingType	Surface Mount
Package/Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

概述

Description

DRV2605LTDGSRQ1 is a Texas Instruments haptic motor driver IC (DRV2605L) in a RoHS-compliant DGSRQ1 package. It drives ERM (eccentric rotating mass) or LRA (linear resonant actuator) vibration motors to generate tactile feedback in devices like phones, wearables, and controllers. The part provides a simple control interface (I2C-like) to select built-in waveform patterns, set drive current, enable/disable, and monitor faults. It integrates the motor bridge outputs with protective features such as undervoltage, overcurrent, and thermal shutdown, and supports low-power standby. The TDGSRQ1 suffix indicates the specific packaging/tape-and-reel variant. Typical operating range is 2.7–5.5 V with programmable peak current and waveform playback to tailor haptic effects.

Package

DRV2605LTDGSRQ1 is in a 16‑pin leadless WSON package (4x4 mm), RoHS-compliant.

Pinout

- Pin count: 20 pins (DGSRQ1 package)
- Function: TI DRV2605L is a single-channel haptic driver for ERM/LRA motors. It provides programmable waveform playback, amplitude, and duration with an I2C-compatible control interface, plus current regulation and protection features for driving a vibration motor.

Manufacturer

- Manufacturer: Texas Instruments (TI)
- What kind of company: American multinational semiconductor company that designs and manufactures analog, mixed-signal, and embedded processing ICs; one of the world’s largest semiconductor companies.

Application

DRV2605L is a haptic driver for ERM/LRA vibration motors. Typical applications:
- Mobile devices (phones, tablets)
- Wearables and game controllers
- Remote controls and consumer electronics
- Automotive HMI and in-dash controls
- Medical and industrial equipment needing tactile feedback
(Drives vibration patterns to provide tactile feedback.)

Equivalent

Direct equivalents from other vendors do not exist. DRV2605LTDGSRQ1 is TI’s DRV2605L two-channel haptic motor driver. Closest cross-refs are within TI’s DRV260x family: DRV2605L (same device in another package) and DRV2604L (similar two-channel ERM/LRA driver). For non‑TI options, look for two-channel haptic motor drivers with similar voltage/current ratings and LRA/ERM support, and use TI’s cross-reference tool or distributor catalogs to verify substitutions.