圖片僅供參考
CH341A
- 製造商
- 製造商。 部分 #CH341A
- 包
- 資料表 CH341A DataSheet
- 有現貨的9896
100%原創; 新
24小時準備發貨
365天保修
RFQ&; 獲得更多折扣
規格
| Manufacturer | WCH(Jiangsu Qin Heng) |
| Package | SOP-28-300mil |
| Voltage - Supply | 3.3V |
| Protocol | USB 2.0 |
| Data Rate | 2Mbps |
概述
Description
The CH341A is a versatile USB interface chip commonly used for programming EEPROMs, flash memory, and microcontrollers. It acts as a bridge between a computer and various non-volatile memory devices, facilitating data reading, writing, and erasing tasks.
Key features include support for a wide range of memory chips, including 25xx, 93xx, and 24xx series devices, and the ability to interface with both 8-bit and 16-bit data buses. Its USB connection allows for easy integration with PCs, making it a popular choice among hobbyists and professionals for firmware development, data recovery, and hardware repair.
CH341A programmers often come with open-source software tools that provide user-friendly interfaces for interacting with supported devices. Its affordability and functionality have made it a staple in electronics development and troubleshooting. However, users should verify compatibility with specific memory chips and consider using additional protective measures when working with sensitive components.
Key features include support for a wide range of memory chips, including 25xx, 93xx, and 24xx series devices, and the ability to interface with both 8-bit and 16-bit data buses. Its USB connection allows for easy integration with PCs, making it a popular choice among hobbyists and professionals for firmware development, data recovery, and hardware repair.
CH341A programmers often come with open-source software tools that provide user-friendly interfaces for interacting with supported devices. Its affordability and functionality have made it a staple in electronics development and troubleshooting. However, users should verify compatibility with specific memory chips and consider using additional protective measures when working with sensitive components.
Features
The CH341A is a versatile USB to parallel and serial interface chip commonly used for programming EEPROMs, flash memory, and microcontrollers. Key features include:
1. USB Connectivity: Provides a USB 2.0 interface for easy connection to PCs.
2. Multi-Functionality: Supports multiple protocols including I2C, SPI, and UART.
3. EEPROM Programming: Capable of programming various types of EEPROMs and flash memory chips.
4. Voltage Compatibility: Works with a range of voltage levels (typically 3.3V to 5V) to accommodate different devices.
5. Driver Support: Compatible with Windows, Linux, and macOS, with available drivers simplifying integration.
6. Ease of Use: Often used with open-source software tools, making it accessible for hobbyists and professionals alike.
7. Affordable: Cost-effective solution for DIY projects and prototyping.
Overall, the CH341A is a reliable and widely-used tool for electronics enthusiasts and professionals for interfacing and programming tasks.
1. USB Connectivity: Provides a USB 2.0 interface for easy connection to PCs.
2. Multi-Functionality: Supports multiple protocols including I2C, SPI, and UART.
3. EEPROM Programming: Capable of programming various types of EEPROMs and flash memory chips.
4. Voltage Compatibility: Works with a range of voltage levels (typically 3.3V to 5V) to accommodate different devices.
5. Driver Support: Compatible with Windows, Linux, and macOS, with available drivers simplifying integration.
6. Ease of Use: Often used with open-source software tools, making it accessible for hobbyists and professionals alike.
7. Affordable: Cost-effective solution for DIY projects and prototyping.
Overall, the CH341A is a reliable and widely-used tool for electronics enthusiasts and professionals for interfacing and programming tasks.
Package
The CH341A is typically packaged in a 16-pin DIP (Dual In-line Package) format. It can also be found in SOIC (Small Outline Integrated Circuit) and TSSOP (Thin Shrink Small Outline Package) configurations, depending on the specific variant and manufacturer.
Pinout
The CH341A is a versatile USB to parallel and serial interface adapter, commonly used for programming EEPROMs, flash memory, and microcontrollers. It typically comes in a 16-pin package.
Here are the pin functions:
1. VCC (Pin 1): Power supply (3.3V or 5V).
2. GND (Pin 2): Ground.
3. D0-D7 (Pins 3-10): Data bus for parallel data transfer.
4. ALE (Pin 11): Address latch enable.
5. CE (Pin 12): Chip enable, activates the device.
6. OE (Pin 13): Output enable, controls output data.
7. WE (Pin 14): Write enable, controls write operations.
8. RESET (Pin 15): Reset pin for initialization.
9. CLK (Pin 16): Clock signal for synchronous operations.
The CH341A is widely used in various applications due to its ease of use and support for multiple protocols.
Here are the pin functions:
1. VCC (Pin 1): Power supply (3.3V or 5V).
2. GND (Pin 2): Ground.
3. D0-D7 (Pins 3-10): Data bus for parallel data transfer.
4. ALE (Pin 11): Address latch enable.
5. CE (Pin 12): Chip enable, activates the device.
6. OE (Pin 13): Output enable, controls output data.
7. WE (Pin 14): Write enable, controls write operations.
8. RESET (Pin 15): Reset pin for initialization.
9. CLK (Pin 16): Clock signal for synchronous operations.
The CH341A is widely used in various applications due to its ease of use and support for multiple protocols.
Manufacturer
The CH341A is manufactured by a company called WCH (Nanjing Weichuang Electronics Co., Ltd.), which is a Chinese semiconductor company. WCH specializes in designing and producing integrated circuits (ICs) and USB-related products, including USB to serial converters, USB to parallel converters, and various microcontrollers. The CH341A, specifically, is a versatile USB interface chip commonly used for programming EEPROMs, flash memory, and other devices in electronics projects and repairs. WCH is known for providing cost-effective solutions in the electronics market, catering primarily to manufacturers and hobbyists in the field of embedded systems and computer peripherals.
Application
The CH341A is primarily used for programming and interfacing with EEPROMs, Flash memory, and microcontrollers. Its applications include data recovery, BIOS chip programming, firmware updates, and device development. Additionally, it is utilized in electronic testing, repairing computers, and working with various embedded systems. Its versatility makes it popular among hobbyists, engineers, and technicians in electronics and hardware development.
Equivalent
Equivalent products to the CH341A chip include the FTDI FT232RL, WCH CH341G, and the CP2102. These chips offer similar USB-to-serial/parallel interfaces and are used for programming and communication with various electronic devices. Each has its specific applications, so compatibility may vary depending on the project requirements.
船舶
運輸管道我們
通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。
運費參攷(DHL/FedEx):
動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。
聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。
增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。
掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。
支付
Payment Methods
付款條件為100%預付。
現時,我們只接受以下付款方式:
1. 貝寶
2. 信用卡/借記卡
3. 電匯
類似的
-
MX25R8035FM1IL0
Macronix
-
MX25L3233FM1I-08Q
Macronix
-
MX25V4035FZUI
Macronix
-
MX25V2033FM1I
Macronix
-
MX30LF2G28AD-TI
Macronix
-
MX25V1635FM2I
Macronix
-
MX25L6433FM2I-08G
Macronix
-
MX25U6435FM2I-10G
Macronix
-
MX25L12833FM2I-10..
Macronix
-
MX25L12833FZNI-10..
Macronix
-
MX29LV640ETTI-70G
Macronix
-
MX30LF4G18AC-TI
Macronix