BCM54240C1KFBG

圖片僅供參考

BCM54240C1KFBG

COMBO SGMII QUAD GPHY

  • 製造商
  • 製造商。 部分 #BCM54240C1KFBG
  • 包
  • 資料表
  • 有現貨的2871

100%原創; 新

24小時準備發貨

365天保修

RFQ&; 獲得更多折扣

規格

Supplier Broadcom Limited
Package Tray
ProductStatus Active

概述

Description

BCM54240C1KFBG is Broadcom’s 4-port Gigabit Ethernet switch/controller designed for embedded networking gear. It provides four 10/100/1000BASE-T PHYs with an internal switch fabric, enabling a small, single-chip Ethernet switch for devices like routers, gateways, switches, or networked storage.
Key features (high level):
- 4 x RJ-45 ports with auto-negotiation and back-to-back operation at 10/100/1000 Mbps
- Internal L2 switch fabric with store-and-forward operation
- Standard Ethernet features: VLAN (802.1Q), QoS/traffic shaping, jumbo frames
- Management via MDIO/MDC for PHY configuration and status
- Suitable for embedded hosts in consumer/SMB networking equipment
Packaging/interface:
- C1KFBG indicates a specific revision/package variant; exact pinout, host interface, and power rails are defined in the Broadcom datasheet (often NDA-limited).
Applications:
- Home/office gateways, small business switches, embedded networking appliances.
For precise electrical, timing, and programming details, consult the BCM54240C1 data sheet from Broadcom.

Features

Here are the typical features of the BCM54240C1KFBG:
- Quad Gigabit Ethernet MAC/PHY cores: four independent 10/100/1000BASE-T ports
- Host interface: PCIe (x1) for connection to CPU/host
- Full/half duplex operation with auto-negotiation and IEEE 802.3x flow control
- Jumbo frame support (up to ~9 KB)
- VLAN support (802.1Q) and basic QoS capabilities
- Checksum offloads and other DMA/IP offloads for TCP/IP traffic
- MDIO/MDC PHY management interface
- Large DMA descriptor rings and efficient DMA engine for high performance
- Per-port status/LED indicators
- Power management and low-power/standby modes (Wake-on-LAN where supported)
- Typical embedded/SOC integration footprint with RoHS-compliant packaging
Note: exact feature set and supported options can vary by revision/package; consult the official datasheet for precise specs and host-interface details.

Package

FBGA — Fine-pitch Ball Grid Array (40-ball package) for BCM54240C1KFBG.

Pinout

Pin count: 196-pin Fine-Pitch BGA (KFBG package).
Function: Broadcom BCM54240C1KFBG is a quad-port Ethernet PHY (4 x 10/100/1000BASE-T) with MDIO/MDC management interface; provides the physical layer for four Ethernet ports (no onboard MAC).

Manufacturer

Manufacturer: Broadcom Inc.
What kind of company: Broadcom is a global semiconductor company (fabless) that designs and sells a wide range of chips and infrastructure software for networking, broadband, wireless, storage, and data center applications. It outsources manufacturing to foundries.

Application

BCM54240C1KFBG is a quad-port 10/100/1000BASE-T Ethernet PHY. Applications include NICs and embedded Ethernet controllers, multi-port switches/routers and network appliances, industrial Ethernet equipment and automation gear, and IP cameras/video servers that require several copper Ethernet ports.

Equivalent

Direct public equivalents for BCM54240C1KFBG aren’t listed. It’s a Broadcom 4-port 10/100/1000BASE-T Ethernet PHY (FBGA). For a drop-in, look for other Broadcom BCM5424x/BCM54xx 4-port PHYs with the same interface and package. Otherwise use Broadcom’s cross-reference tool or a distributor (Digi‑Key/Mouser) with your constraints (ports, interface, LEDs, package). Non-Broadcom substitutes depend on interface/footprint; there is no universal pin‑to‑pin equivalent.

船舶

運輸管道我們

通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。


運費參攷(DHL/FedEx):

動態主要裝載: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為2-5個工作日。

聯邦快遞: 運費從25美元到40美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

不斷電供應系統: 運費從25美元到45美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

三硝基甲苯: 運費從25美元到65美元(0.5公斤)不等,預計交貨時間為3-7個工作日。

增强型短消息: 運費從30美元到50美元(0.5公斤)不等,預計交貨時間為7-15個工作日。

掛號: 運費為2-4美元(0.1公斤),預計交貨時間為5-20個工作日。

支付

Payment Methods

付款條件為100%預付。

現時,我們只接受以下付款方式:

1. 貝寶

2. 信用卡/借記卡

3. 電匯