圖片僅供參考

AT29C010A-90JC

Name: AT29C010A-90JC
Rating: 4.7 (12 reviews)

IC FLASH 1MBIT PARALLEL 32PLCC

製造商
製造商。部分 #AT29C010A-90JC
包 32-LCC(J-Lead)
資料表
有現貨的9096

+BOM RFQ

100%原創；新

24小時準備發貨

365天保修

RFQ&；獲得更多折扣

規格

Package	Tube
ProductStatus	Obsolete
MemoryType	Non-Volatile
MemoryFormat	FLASH
Technology	FLASH
MemorySize	1Mb (128K x 8)
MemoryInterface	Parallel
WriteCycleTime-WordPage	10ms
AccessTime	90 ns
Voltage-Supply	4.5V ~ 5.5V
OperatingTemperature	0°C ~ 70°C (TC)
MountingType	Surface Mount
Package/Case	32-LCC (J-Lead)

概述

Description

AT29C010A-90JC is an Atmel (now Microchip) 1-Mbit, parallel, non-volatile EEPROM. It provides 128K × 8 organization (one byte wide data bus) with random, asynchronous access. The “90” indicates a typical 90 ns read access time. It operates from a single 5 V supply (common for this family) and uses standard control signals: Chip Enable (CE/CS), Output Enable (OE), and Write Enable (WE) to perform reads and writes to 8-bit I/O lines (I/O0–I/O7). Address inputs (A0–A16) select the byte to access. The JC suffix denotes a 32-pin JEDEC package (e.g., DIP/SOIC). Write cycles are non-destructive and require a defined tWC/tWR per the datasheet (typically a few ms). Applications include firmware or configuration storage for embedded systems, BIOS/firmware backup, and any non-volatile random-access memory needs. Note: this is a parallel EEPROM (not flash) and requires explicit write operations and cycle timing per the datasheet. For exact electrical characteristics, timings, and pinout, consult the AT29C010A-90JC datasheet.

Features

Key features of AT29C010A-90JC (parallell flash 1 Mbit):
- Memory: 1 Mbit (128K × 8) flash memory
- Speed grade: 90 ns access time
- Supply: 5V single-supply operation; TTL-compatible I/O
- Interface: 8-bit data bus; random access reads
- In-system programmable: supports standard program/erase operations
- Erase/Programming: chip and sector/block erase options
- Endurance/Data retention: typical ~100,000 write cycles; data retention on the order of years (datasheet specifies long-term retention)
- Protection: hardware protection features for sectors/blocks
- Power/ standby: low-power standby modes
- Packaging: -JC speed/package option (ceramic/leadframe style, 28-pin family packaging)
Note: exact block sizes, programming times, and electrical spec details are in the datasheet for the -90JC variant.

Package

28-pin PLCC (Plastic Leaded Chip Carrier) package; -90 indicates 90 ns access time.

Pinout

- Pin count: 28 pins (28-pin package)
- Function: 1-Mbit parallel EEPROM (nonvolatile) with an 8-bit data bus (128K x 8). Uses address A0–A16 and control pins CE, OE, WE (plus WP, Vcc, GND). Speed grade -90 (90 ns).

Manufacturer

Manufacturer: Atmel Corporation (now part of Microchip Technology).
What kind of company: A semiconductor company that designs and manufactures memory ICs (EPROM/Flash/EEPROM), microcontrollers, and other integrated circuits.

Application

Application areas: Embedded systems needing nonvolatile, random-access memory. Stores firmware/boot code, microcontroller program memory, calibration data, and look-up tables. Useful in consumer electronics, automotive and industrial controls, printers, networking gear, set-top boxes, and other devices requiring 1 Mbit (128K x 8) nonvolatile memory in a 5V environment.

Equivalent

Equivalent parts (1 Mbit, 8‑bit, 5V CMOS PROM, similar pinout) from other vendors include:
- AM29C010 (AMD)
- M29C010 (STMicro)
- MX29C010 (Macronix)
- W29C010 (Winbond)
- MB29C010 (Fujitsu)
Note: check exact voltage, speed (90 ns), and pinout for your package, as some vendors use similar names with slight differences.