AP2176SG-13

圖片僅供參考

AP2176SG-13

IC PWR SWITCH P-CHANNEL 1:2 8SOP

100%原創； 新

24小時準備發貨

365天保修

RFQ&； 獲得更多折扣

規格

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
SwitchType USB Switch
NumberofOutputs 2
Ratio-Input:Output 1:2
OutputConfiguration High Side
OutputType P-Channel
Interface On/Off
Voltage-Load 2.7V ~ 5.5V
Voltage-Supply(Vcc/Vdd) Not Required
Current-Output(Max) 1A
RdsOn(Typ) 100mOhm
InputType Non-Inverting
Features Status Flag
FaultProtection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
SupplierDevicePackage 8-SOP

概述

Description

AP2176SG-13 is a device ID likely for a power-management IC (PMIC), typically a DC-DC regulator or similar regulator in a small package. The exact topology, voltage ranges, and pinout depend on the manufacturer and datasheet. The suffixes “SG” and “-13” usually denote the package variant and a specific revision or output option.
To give a precise introduction, I’d need the manufacturer or a datasheet link. In general, a PMIC part like this will cover:
- Topology (buck, boost, buck-boost)
- Input voltage range and output voltage(s)
- Maximum current and efficiency
- Protections (overcurrent, overtemp, short-circuit)
- Enable/shutdown behavior
- Package type and pinout
- Typical application circuits

Package

SOT-23-6 (SC-74A) surface-mount package. Verify with the latest AP2176SG-13 datasheet for exact variant details.

Pinout

Pin count: 6 pins. Function: AP2176SG-13 is a 6‑pin DC-DC buck (step-down) switching regulator with an integrated switching transistor; provides a regulated output via feedback and includes an enable/shutdown control (typically in a SOT‑23‑6/SC‑70‑6 package).

Manufacturer

Manufacturer: Anpec Electronics Corp. (Anpec).
What kind of company: Anpec is a Taiwan-based fabless semiconductor company that designs and markets analog and mixed-signal ICs, especially power-management ICs (buck/boost regulators, LED drivers, etc.) for consumer electronics and automotive applications.

Application

Typical application areas for AP2176SG-13:
- Portable and battery-powered devices (phones, tablets, wearables)
- Computer/embedded system power rails and VRMs
- LED lighting and backlight drivers
- Automotive and industrial power supplies
- General DC-DC conversion in consumer electronics

船舶

運輸管道我們

通過DHL、FedEx、TNT、UPS或您選擇的任何其他貨運代理提供全球運輸服務。


運費參攷（DHL/FedEx）:

動態主要裝載: 運費從25美元到45美元（0.5公斤）不等，預計交貨時間為2-5個工作日。

聯邦快遞: 運費從25美元到40美元（0.5公斤）不等，預計交貨時間為3-7個工作日。

不斷電供應系統: 運費從25美元到45美元（0.5公斤）不等，預計交貨時間為3-7個工作日。

三硝基甲苯: 運費從25美元到65美元（0.5公斤）不等，預計交貨時間為3-7個工作日。

增强型短消息: 運費從30美元到50美元（0.5公斤）不等，預計交貨時間為7-15個工作日。

掛號: 運費為2-4美元（0.1公斤），預計交貨時間為5-20個工作日。

支付

Payment Methods

付款條件為100%預付。

現時，我們只接受以下付款方式:

1. 貝寶

2. 信用卡/借記卡

3. 電匯

類似的